Huawei H35-580_V2.0 Reliable Dumps Ebook | Reliable H35-580_V2.0 Test Vce

DOWNLOAD the newest VCEPrep H35-580_V2.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1VzF5QuXnTlknYHuLDca0__wPWYLJh2PF

Nobody wants to be stranded in the same position in his or her company and be a normal person forever. Maybe you want to get the H35-580_V2.0 certification, but daily work and long-time traffic make you busier to improve yourself. There is a piece of good news for you. Thanks to our H35-580_V2.0 Training Materials, you can learn for your H35-580_V2.0 certification anytime, everywhere. With our H35-580_V2.0 study materials, you will easily pass the H35-580_V2.0 examination and gain more confidence. Now let's see our products together.

Huawei H35-580_V2.0 Exam Syllabus Topics:

SectionObjectives
5G Performance and Troubleshooting- Fault diagnosis and optimization methods
- Drive test and data analysis
5G Fundamentals- 5G NR principles and key technologies
- 5G network architecture and key concepts
Radio Network Planning (RNP)- Capacity planning and dimensioning
- Coverage planning principles
- Site selection and parameter planning
Radio Network Optimization (RNO)- Coverage and interference optimization
- KPI monitoring and analysis
- Mobility optimization (handover, cell reselection)

>> Huawei H35-580_V2.0 Reliable Dumps Ebook <<

Reliable H35-580_V2.0 Test Vce, Reliable H35-580_V2.0 Study Notes

Once you ensure your grasp on the H35-580_V2.0 Questions and answers, evaluate your learning solving the H35-580_V2.0 practice tests provided by our testing engine. This innovative facility provides you a number of practice questions and answers and highlights the weak points in your learning. You can improve the weak areas before taking the actual test and thus brighten your chances of passing the exam with an excellent score. Moreover, doing these practice tests will impart you knowledge of the actual exam format and develop your command over it.

Huawei HCIA-5G-RNP&RNO V2.0 Sample Questions (Q62-Q67):

NEW QUESTION # 62
Which of the following is not the cause of cell unavailability due to system faults (specified using
N.Cell.Unavail.Dur.System)?

Answer: D

Explanation:
Explanation
According to the HCIA-5G V2.0 Exam Outline, cell unavailability due to system faults (specified using
N.Cell.Unavail.Dur.System) is caused by factors such as CPRI link faults, board faults, and faults on an RF module's TX or RX channels, which correspond to options A, C, and D. Blocking cells by using MML commands is not a system fault, but a manual operation, which corresponds to option B.


NEW QUESTION # 63
In RAN3.0 version, CSI-RS for beam management is not supported in low-frequency scenarios.

Answer: B

Explanation:
Low-band deployments mainly rely on SSB-based beam management, and CSI-RS beam management is not supported in this scenario.


NEW QUESTION # 64
In a Huawei base station, which of the following bearers can only be configured as an MCG bearer?

Answer: B

Explanation:
According to the LTE-NR tight-interworking and the first steps to 5G , in a Huawei base station, QCI2 can only be configured as an MCG (Master Cell Group) bearer. QCI2 is a voice bearer that requires low latency and high reliability. Therefore, it cannot be configured as an SCG (Secondary Cell Group) bearer or a split bearer that may introduce additional delay or packet loss. QCI6, QCI9, and QQ1 can be configured as either MCG bearers, SCG bearers, or split bearers depending on the service requirements and network conditions.


NEW QUESTION # 65
During the handover preparation process, the source cell determines the target cell for handover based on which of the following parameters?

Answer: B

Explanation:
The source cell initially identifies the target cell based on the Physical Cell Identity (PCI) reported in measurement reports.


NEW QUESTION # 66
What are characteristics of eCPRI links? (Select All that Apply)

Answer: A,B,D

Explanation:
They require clock synchronization: eCPRI links use Ethernet as the transport layer, which does not provide inherent synchronization. Therefore, eCPRI links require external clock synchronization methods, such as IEEE 1588v2 Precision Time Protocol (PTP) or Synchronous Ethernet (SyncE).
They are based on the IP mechanism: eCPRI links use IP as the network layer, which provides routing and addressing functions for eCPRI messages. eCPRI links can use either IPv4 or IPv6 protocols.
They require AAU support: eCPRI links connect between Radio Equipment Control (REC) and Radio Equipment (RE) in a base station. AAU (Active Antenna Unit) is a type of RE that integrates RF and antenna functions in one unit. Therefore, eCPRI links require AAU support to enable flexible functional split options and reduce fronthaul bandwidth requirements.
eCPRI links are not based on the TDM mechanism because they do not use fixed time slots to transmit data. Instead, they use variable-length packets to transmit data according to different service requirements.


NEW QUESTION # 67
......

All these features make the H35-580_V2.0 exam practice question the ideal study material for H35-580_V2.0 exam preparation and it is designed to assist you in HCIA-5G-RNP&RNO V2.0 (H35-580_V2.0) practice test. We guarantee you that you will not find all these top-rated features anywhere. They are only available with H35-580_V2.0 exam questions format.

Reliable H35-580_V2.0 Test Vce: https://www.vceprep.com/H35-580_V2.0-latest-vce-prep.html

P.S. Free & New H35-580_V2.0 dumps are available on Google Drive shared by VCEPrep: https://drive.google.com/open?id=1VzF5QuXnTlknYHuLDca0__wPWYLJh2PF