DumpsTorrent team of professionals made this product after working day and night so that users can prepare from it for the Huawei H35-581_V2.0 certification test successfully. DumpsTorrent even guarantees that you will pass the HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) test on the first try by preparing with real questions. If you fail to pass the certification exam, despite all your efforts, you could get a full refund from DumpsTorrent according to terms and conditions.
| Section | Weight | Objectives |
|---|---|---|
| 5G Radio Network Planning | 10% | - Coverage and capacity planning - Link budget calculation - Parameter planning and configuration - Interference analysis and mitigation |
| 5G RAN Feature Application | 35% | - Energy saving and coverage enhancement features - Carrier aggregation and dual connectivity - Mobility management and handover optimization - Power control and load balancing |
| 5G Industry Applications & Private Network Solutions | 5% | - Private 5G network requirements and design - Vertical industry scenarios and KPI requirements |
| 5G Radio Network Optimization | 20% | - Drive test and signaling tracing - Performance indicator analysis - Coverage, capacity, and quality optimization - Fault diagnosis and troubleshooting |
| 5G Radio Network In-depth Principles | 30% | - Massive MIMO and beamforming principles - 5G spectrum and frame structure - 5G NR protocol stack and signaling procedures - 5G NR air interface fundamentals |
>> H35-581_V2.0 New Braindumps Sheet <<
For one thing, the most advanced operation system in our company which can assure you the fastest delivery speed on our H35-581_V2.0 exam questions. For another thing, with the online app version of our H35-581_V2.0 actual exam, you can just feel free to practice the questions in our H35-581_V2.0 Training Materials on all kinds of electronic devices. In addition, under the help of our H35-581_V2.0 exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future.
NEW QUESTION # 32
Which of the following cannot be transmitted on the PDCCH?
Answer: B
Explanation:
The Precoding Matrix Indicator (PMI) is the correct answer because PMI is primarily reported by the UE as part of Channel State Information (CSI), rather than being transmitted as a conventional Downlink Control Information (DCI) field on the Physical Downlink Control Channel (PDCCH).
In 5G NR, the PDCCH carries scheduling and control information from the gNodeB to the UE. DCI formats determine whether the signaling concerns uplink transmission, downlink transmission, or another supported control procedure.
For downlink scheduling, DCI formats 1_0 and 1_1 can specify PDSCH resource assignments, including frequency-domain and time-domain resource allocation.
The DCI also contains a Modulation and Coding Scheme (MCS) field. This identifies the modulation order and target coding rate associated with the scheduled PDSCH transmission.
For uplink scheduling, DCI formats 0_0 and 0_1 can provide PUSCH resource allocations and associated transmission parameters.
PMI serves a different purpose. Based on configured CSI-RS measurements, the UE determines a preferred precoding matrix and reports the associated PMI to the gNodeB.
This feedback is conveyed through applicable uplink reporting procedures using PUCCH or PUSCH.
Therefore, PMI is the only listed parameter that is not ordinarily carried as a PDCCH DCI field.
Official Reference: 3GPP TS 38.212, Section 7.3.1, DCI Formats ; TS 38.214, Section 5.2, Channel State Information Reporting .
NEW QUESTION # 33
Which of the following 5GC modules connects to IMS?
Answer: C
Explanation:
The User Plane Function (UPF) is the 5G Core component that provides user-plane connectivity between PDU sessions and external Data Networks (DNs), including the IP Multimedia Subsystem (IMS).
IMS supplies multimedia communication services such as voice and video sessions using IP-based signaling and media transport.
In a 5G Standalone deployment, a UE can establish an IMS PDU session to access IMS services, including Voice over NR (VoNR).
The UPF processes user-plane packets associated with the PDU session and forwards traffic toward the appropriate external data network through the N6 interface.
For IMS services, this connectivity enables Session Initiation Protocol (SIP) signaling to reach relevant IMS components, such as the Proxy Call Session Control Function (P-CSCF).
The UPF also forwards media traffic according to the established packet-handling and forwarding rules.
The other functions serve different purposes.
AMF manages UE registration, access, and mobility procedures.
SMF controls PDU sessions, selects and configures UPFs, and manages applicable session-related QoS rules.
UDM manages subscription information and supports user-data services.
Although the SMF participates in establishing connectivity and policy enforcement, the UPF provides the actual user-plane path toward IMS.
Therefore, option A is correct.
Official Reference: 3GPP TS 23.501, Sections 4.2 and 6.2.3, 5G System Architecture and User Plane Function ; TS 23.228, Annex Y.9.2, IMS Services Architecture .
NEW QUESTION # 34
Which of the following MCS indices is required for 256QAM scheduling in downlink peak-rate testing?
Answer: D
Explanation:
MCS index 27 is the expected answer because it represents the highest non-reserved spectral-efficiency entry in the conventional NR PDSCH MCS table supporting 256QAM.
The Modulation and Coding Scheme (MCS) determines the modulation order and target coding rate used for scheduled data transmission.
For 256QAM, the modulation order is Q_m=8, meaning eight coded bits are mapped to each modulation symbol.
According to 3GPP TS 38.214, Table 5.1.3.1-2, MCS index 27 uses modulation order 8 and a target coding- rate parameter of 948/1024.
Its spectral efficiency is approximately 7.4063 bits per resource element before applicable resource overheads.
This makes index 27 particularly relevant when evaluating maximum downlink throughput under favorable radio conditions.
However, an important distinction exists between enabling 256QAM and achieving maximum spectral efficiency.
MCS index 23 also uses 256QAM, with a target coding-rate parameter of 797/1024 and a lower spectral efficiency of approximately 6.2266.
Therefore, both indices 23 and 27 can represent 256QAM modulation, but index 27 provides the higher nominal spectral efficiency.
MCS index 28 is reserved in the referenced table, while index 32 is outside the five-bit MCS index range.
Consequently, B is correct for maximum peak-rate testing.
Official Reference: 3GPP TS 38.214, Section 5.1.3.1, Table 5.1.3.1-2, MCS Index Table 2 for PDSCH .
Technical warning / qualification: Option D also represents 256QAM. The question is unambiguous only if peak-rate testing means selecting the highest non-reserved spectral-efficiency entry. The wording should explicitly state this condition.
NEW QUESTION # 35
Which of the following parameters determines the PRACH time-domain position?
Answer: B
Explanation:
The PRACH configuration index determines the time-domain opportunities available for Physical Random Access Channel (PRACH) preamble transmission.
PRACH is used during initial network access, applicable mobility procedures, and other operations requiring uplink synchronization or random-access signaling.
In NR, random-access occasions must be configured so that the UE knows when and where it is permitted to transmit a PRACH preamble.
The prach-ConfigurationIndex parameter identifies an entry in the standardized random-access configuration tables.
These tables specify characteristics including the PRACH preamble format, applicable system-frame periodicity, subframe or slot location, starting symbol, and number of time-domain PRACH occasions.
The remaining parameters control different aspects of random access.
Option A - Logic root sequence: The logical root sequence index determines the Zadoff-Chu root sequence used for PRACH preamble generation.
Option B - Frequency offset: The frequency-domain configuration determines the placement of PRACH resources within the available uplink bandwidth.
Option C - Ncs: The cyclic-shift parameter determines the cyclic-shift spacing used to generate different preamble sequences from a common root sequence.
These parameters affect PRACH sequence generation or frequency-domain placement, rather than identifying its scheduling opportunities in time.
Therefore, option D is correct.
Official Reference: 3GPP TS 38.211, Section 6.3.3.2, PRACH Mapping to Physical Resources , Tables
6.3.3.2-2 through 6.3.3.2-4.
NEW QUESTION # 36
What is the maximum coverage altitude for low-attitude 5G drone scenarios?
Answer: B
Explanation:
The expected maximum coverage altitude is 1,000 meters, according to Huawei's proposed air-to-ground cellular communication architecture for connected-drone applications.
Huawei's Low-Altitude Connected Drone Flight Safety Test Report , published in cooperation with the Civil Aviation Administration of China (CAAC), differentiates the planned aerial coverage capabilities of 4G and
5G systems.
The report describes an integrated air-to-ground communication framework supporting 4G aerial coverage below 300 meters and 5G aerial coverage below 1,000 meters.
This capability is associated with extending cellular-network coverage into the low-altitude airspace used by connected UAVs.
Aerial radio-network planning differs substantially from conventional terrestrial coverage planning. UAVs frequently experience line-of-sight propagation toward multiple base stations, increasing the probability of inter-cell interference.
Traditional antenna downtilt configurations are primarily optimized for ground-level terminals. As UAV altitude increases, serving-cell coverage may depend on antenna sidelobes, and radio-link quality can fluctuate despite relatively strong received signal power.
Technologies such as Massive MIMO, three-dimensional beamforming, antenna optimization, and interference coordination help address these challenges.
The specified 1,000-meter altitude represents the coverage target described in the cited architecture rather than a guaranteed operating height for every commercial deployment.
Official Reference: Huawei/CAAC, Low-Altitude Connected Drone Flight Safety Test Report , Section II, Concepts of Drone Flight Safety , Figure 6.
NEW QUESTION # 37
......
As you can see, our H35-581_V2.0 practice exam will not occupy too much time. Also, your normal life will not be disrupted. The only difference is that you harvest a lot of useful knowledge. Do not reject learning new things. Maybe your life will be changed a lot after learning our H35-581_V2.0 Training Questions. And a brighter future is waiting for you. So don't waste time and come to buy our H35-581_V2.0 study braindumps.
Test H35-581_V2.0 Pattern: https://www.dumpstorrent.com/H35-581_V2.0-exam-dumps-torrent.html