Nowadays, so many internet professionals agree that Fortinet exam certificate is a stepping stone to the peak of our life. NSE7_FSN_AR-7.6 exam is an exam concerned by lots of internet professionals. Close to 100% passing rate is the best gift that our customers give us. We also hope our NSE7_FSN_AR-7.6 exam materials can help more and more ambitious people pass the NSE7_FSN_AR-7.6 exam. Our professional team checks the update of exam materials every day, so please rest assured that the NSE7_FSN_AR-7.6 Exam software you are using must contain the latest and most information. We are a team of the exam questions providers NSE7_FSN_AR-7.6 exam in internet that ensured you can pass actual test 100%. We have experienced and professional experts to create the latest NSE7_FSN_AR-7.6 exam questions and answers many times which are approach to the NSE7_FSN_AR-7.6 exam.
| Section | Objectives |
|---|---|
| SD-WAN | - SD-WAN deployment
|
| Enterprise Firewall | - Central management
|
>> NSE7_FSN_AR-7.6 Accurate Answers <<
Now there are many IT professionals in the world and the competition of IT industry is very fierce. So many IT professionals will choose to participate in the IT certification exam to improve their position in the IT industry. NSE7_FSN_AR-7.6 Exam is a very important Fortinet's certification exam. But if you want to get a Fortinet certification, you must pass the exam.
NEW QUESTION # 11
Refer to the exhibit.
Based on the exhibit, what is the first message with which Spoke 1 replies to the hub, instructing it to bring up the dynamic tunnel when a client generates traffic destined for Spoke 2? (Choose one answer.)
Answer: C
Explanation:
The ADVPN shortcut negotiation begins after traffic from Spoke 1 to Spoke 2 initially travels through the hub. When the hub detects that both spokes can establish a more direct connection, the hub-not Spoke 1- sends the first control message: a shortcut offer to Spoke 1.
The SD-WAN 7.6 Enterprise Administrator Study Guide then states: "Spoke 1 acknowledges the shortcut offer by sending a shortcut query to the hub." Therefore, the first message that Spoke 1 sends in response is the shortcut query , making option A correct.
The hub subsequently forwards that query to Spoke 2. Spoke 2 responds with a shortcut reply , which the hub forwards back to Spoke 1. After Spoke 1 receives the reply containing the necessary peer information, Spoke 1 and Spoke 2 begin IKE negotiation and establish the dynamic spoke-to-spoke shortcut tunnel.
Consequently, the shortcut reply occurs later and originates from Spoke 2, while the offer originates from the hub. "Shortcut forward" describes the hub's forwarding action rather than Spoke 1's first response. This behavior is part of Fortinet's ADVPN shortcut architecture .
NEW QUESTION # 12
Refer to the exhibit.
The output from a collector agent log is shown. The collector agent is showing the status of a workstation as Not Verified. What are two common causes for this message? (Choose two.)
Answer: A,D
Explanation:
The correct answers are B and C.
The study guide has a section titled "Not Verified Status on the Collector Agent" and states:
"The collector agent cannot verify if the user is still logged in" and lists these common causes:
"A firewall is blocking traffic to port 139 and 445"
"The workstation remote registry service is not running"
The guide also explains the verification method:
"For WMI polling mode, the collector agent checks the WMI service. For all the other modes, the collector agent checks the HKEY_USERS hive through remote registry services." If the workstation does not respond to these checks, the status can become not verified An additional requirements slide in the same study guide confirms:
"TCP ports 139 and 445 must be open between the collector agent and all workstations"
"Remote registry service must be up and running on each workstation"
Why the other options are wrong:
A is wrong because the study guide mentions a workstation coming out of hibernate mode under a different problem: "No Internet After IP Address Change", not as a common cause of Not Verified status D is wrong because DNS resolution issues are also discussed under the IP address change scenario, where the collector agent uses DNS to resolve the workstation name after an IP change. That is separate from the Not Verified causes listed for this log message So the verified answers are: B, C.
NEW QUESTION # 13
Refer to the exhibit.
The output of the get router info bgp summary command is shown.
Which statement regarding adjacencies between the local router and its neighbors is correct?
Answer: C
Explanation:
The correct answer is B.
In the exhibit:
Neighbor 100.64.1.254 shows State/PfxRcd = 1, which means the session is established and the local FortiGate has received 1 prefix Neighbor 100.64.2.254 shows State/PfxRcd = Active The study guide explains the BGP states exactly:
Connect: Waiting for a successful three-way TCP connection
Active: Unable to establish the TCP session
OpenSent: Waiting for an OPEN message from the peer
OpenConfirm: Waiting for the keepalive message from the peer
Established: Peers have successfully exchanged OPEN and keepalive messages It also explains how to read the State/PfxRcd column:
"If the state is not established, this column displays the BGP state. If the state is established, this column displays the number of prefixes that the local FortiGate received from that neighbor." Therefore, because neighbor 100.64.2.254 is in Active state, the correct conclusion is that the BGP adjacency cannot form because the TCP session could not be established.
Why the other options are wrong:
A is wrong because BGP can establish adjacencies with multiple neighbors independently; one established neighbor does not block another C is wrong because BGP adjacency is not established based on neighbor "priority"; the output shows adjacency is established because the session completed and prefixes were exchanged D is wrong because having two neighbors in the same remote AS is valid in BGP and does not prevent adjacency formation So the verified answer is: B.
NEW QUESTION # 14
Refer to the exhibit.
The routing table information is shown.
Assuming a default configuration, which three statements about the RPF check on FortiGate are correct? (Choose three.)
Answer: A,B,E
Explanation:
The correct answers are A, D, and E . This is a feasible path RPF check scenario. In FortiGate's default RPF behavior, FortiGate checks whether the routing table contains a valid return route to the source IP address through the same interface on which the packet arrived . The study guide's RPF feasible path example states that FortiGate "checks the routing table for a route that matches the source address and incoming interface of the first original packet." It then gives the exact result: User A passes because "there is a default route through wan1," so packets received on wan1 pass the RPF check regardless of source address.
User B fails because FortiGate does not have a route to 95.56.234.24 through wan2 . User C fails because FortiGate does not have a route to 10.0.4.63 through port1 . Therefore, option B is wrong because FortiGate is not allowing asymmetric return routing here. Option C is wrong because the default route points out wan1 , not port1 , so it cannot validate User C's packet arriving on port1.
NEW QUESTION # 15
Refer to the exhibit.
The exhibit shows the output of a session. Which two statements are correct? (Choose two.)
Answer: A,D
Explanation:
The correct answers are C and D .
For D , the session output shows proto=6, which means TCP, and proto_state=01. The study guide explains that for TCP sessions, "the first number (from left to right) is related to the server-side state and is 0 when the session is not subject to any inspection (flow or proxy). ... The second digit is the client-side state." It also shows that value 1 = ESTABLISHED So proto_state=01 means:
* first digit 0 = no inspection
* second digit 1 = ESTABLISHED
That confirms the TCP session has been successfully established.
For C , the study guide section "Session for an Authenticated User" states: "Any session for traffic coming from an authenticated user contains the authed flag. Additionally, the username is added to the session information." In the exhibit, the session contains user=User1 and an authentication state flag (authd), which indicates the session is associated with an authenticated user.
Why the other options are wrong:
* A is wrong because the session did match a firewall policy . The study guide says the session output includes "The ID of the matching policy" In the exhibit, the session shows policy_id=1 , so a firewall policy was matched.
* B is wrong because the study guide explains the gwy field as:
* first value = gateway to destination
* second value = gateway to source The exhibit shows gwy=10.1.0.254/10.1.10.1, so:
* gateway to destination = 10.1.0.254
* gateway to source = 10.1.10.1
So the verified answers are: C, D .
NEW QUESTION # 16
......
It can be said that our NSE7_FSN_AR-7.6 study questions are the most powerful in the market at present, not only because our company is leader of other companies, but also because we have loyal users. NSE7_FSN_AR-7.6 training materials are not only the domestic market, but also the international high-end market. We are studying some learning models suitable for high-end users. Our NSE7_FSN_AR-7.6 research materials have many advantages. Now, you can know some details about our NSE7_FSN_AR-7.6 guide torrent from our website.
NSE7_FSN_AR-7.6 Well Prep: https://www.dumpsvalid.com/NSE7_FSN_AR-7.6-still-valid-exam.html