100% Pass Quiz 2026 JN0-664: Authoritative Relevant Service Provider, Professional (JNCIP-SP) Questions

P.S. Free & New JN0-664 dumps are available on Google Drive shared by ExamDumpsVCE: https://drive.google.com/open?id=1VOBR1cIhJAv2Ay_Zsz0gh4qoD3Xu5Dsk

To fit in this amazing and highly accepted exam, you must prepare for it with high-rank practice materials like our JN0-664 study materials. Our JN0-664 exam questions are the Best choice in terms of time and money. If you are a beginner, start with the learning guide of JN0-664 Practice Engine and our products will correct your learning problems with the help of the JN0-664 training braindumps.

Juniper JN0-664 Exam Syllabus Topics:

SectionObjectives
Topic 1: MPLS- RSVP and Traffic Engineering
  • 1. Implement MPLS traffic engineering
  • 2. Configure RSVP signaling
- MPLS Fundamentals
  • 1. Configure MPLS and LDP
  • 2. Verify label distribution
Topic 2: Layer 2 VPNs- L2VPN Technologies
  • 1. Configure Martini pseudowires
  • 2. Troubleshoot Layer 2 VPN services
  • 3. Configure VPLS
Topic 3: Layer 3 VPNs- L3VPN Deployment
  • 1. Configure VRFs
  • 2. Implement MP-BGP for VPNs
  • 3. Troubleshoot Layer 3 VPN services
Topic 4: BGP- Advanced BGP Features
  • 1. Configure route reflection
  • 2. Configure confederations
  • 3. Implement BGP communities
- BGP Routing
  • 1. Implement routing policies
  • 2. Troubleshoot BGP peering and route selection
  • 3. Configure IBGP and EBGP
Topic 5: Multicast- Multicast Routing
  • 1. Configure PIM
  • 2. Configure multicast VPNs
  • 3. Verify multicast forwarding
Topic 6: IGP- OSPF
  • 1. Configure and troubleshoot OSPF
  • 2. Analyze OSPF routing behavior
- IS-IS
  • 1. Configure and troubleshoot IS-IS
  • 2. Analyze IS-IS routing behavior

>> Relevant JN0-664 Questions <<

HOT Relevant JN0-664 Questions 100% Pass | Valid Service Provider, Professional (JNCIP-SP) Latest Questions Pass for sure

Now we live in a highly competitive world. If you want to find a decent job and earn a high salary you must own excellent competences and rich knowledge. Under this circumstance, owning a JN0-664 guide torrent is very important because it means you master good competences in certain areas and can handle the job well. The JN0-664 Exam Prep we provide can help you realize your dream to pass JN0-664 exam and then own a JN0-664 exam torrent easily.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q15-Q20):

NEW QUESTION # 15
Exhibit

You must ensure that the VPN backbone is preferred over the back door intra-area link as long as the VPN is available. Referring to the exhibit, which action will accomplish this task?

Answer: A

Explanation:
A sham link is a logical link between two PE routers that belong to the same OSPF area but are connected through an L3VPN. A sham link makes the PE routers appear as if they are directly connected, and prevents OSPF from preferring an intra-area back door link over the VPN backbone. To create a sham link, you need to configure the local and remote addresses of the PE routers under the [edit protocols ospf area area-id] hierarchy level1.


NEW QUESTION # 16
Exhibit

R4 is directly connected to both RPs (R2 and R3) R4 is currently sending all ,o,ns upstream to R3 but you want all joins to go to R2 instead Referring to the exhibit, which configuration change will solve this issue?

Answer: A

Explanation:
Explanation
PIM Bootstrap Router (BSR) is a mechanism that allows PIM routers to discover and announce rendezvous point (RP) information for multicast groups. BSR uses two roles: candidate BSR and candidate RP. Candidate BSR is the router that collects information from all available RPs in the network and advertises it throughout the network. Candidate RP is the router that wants to become the RP and registers itself with the BSR. There can be only one active BSR in the network, which is elected based on the highest priority or highest IP address if the priority is the same. The BSR priority can be configured manually or assigned automatically. The default priority is 0 and the highest priority is 2551. In this question, R4 is directly connected to both RPs (R2 and R3) and is currently sending all joins upstream to R3 but we want all joins to go to R2 instead. To achieve this, we need to change the BSR priority on R2 to be higher than R3 so that R2 becomes the active BSR and advertises its RP information to R4.


NEW QUESTION # 17
Exhibit

Referring to the exhibit, which statement is true?

Answer: D

Explanation:
The auto-export parameter is a routing option that allows a routing instance to share routes with other routing instances or the master routing table. The auto-export parameter automatically exports routes from one routing instance to another based on the route target communities attached to the routes. In this scenario, the
10.101.1.0/24 route will be shared if the auto-export parameter is configured under [edit routing-options] hierarchy level.


NEW QUESTION # 18
You are configuring a BGP signaled Layer 2 VPN across your MPLS enabled core network. In this scenario, which statement is correct?

Answer: B


NEW QUESTION # 19
Exhibit.

Referring to the exhib.t, what must be changed to establish a Level 1 adjacency between routers R1 and R2?

Answer: A

Explanation:
IS-IS routers can form Level 1 or Level 2 adjacencies depending on their configuration and network topology.
Level 1 routers are intra-area routers that share the same area address with their neighbors. Level 2 routers are inter-area routers that can connect different areas. Level 1-2 routers are both intra-area and inter-area routers that can form adjacencies with any other router.
In the exhibit, R1 and R2 are in different areas (49.0001 and 49.0002), so they cannot form a Level 1 adjacency. However, they can form a Level 2 adjacency if they are both configured as Level 1-2 routers. R1 is already configured as a Level 1-2 router, but R2 is configured as a Level 1 router only, because of the level 1 disable command under the lo0.0 interface. This command disables Level 2 routing on the loopback interface, which is used as the router ID for IS-IS.
Therefore, to establish a Level 1 adjacency between R1 and R2, the level 1 disable command under the R2 protocols isis interface lo0.0 hierarchy must be removed. This will enable Level 2 routing on R2 and allow it to form a Level 2 adjacency with R1.


NEW QUESTION # 20
......

Juniper JN0-664 is a certification exam to test IT expertise and skills. If you find a job in the IT industry, many human resource managers in the interview will reference what Juniper related certification you have. If you have Juniper JN0-664 Certification, apparently, it can improve your competitiveness.

JN0-664 Latest Questions: https://www.examdumpsvce.com/JN0-664-valid-exam-dumps.html

P.S. Free & New JN0-664 dumps are available on Google Drive shared by ExamDumpsVCE: https://drive.google.com/open?id=1VOBR1cIhJAv2Ay_Zsz0gh4qoD3Xu5Dsk