Do you need to find a high paying job for yourself? Well, by passing the HCIP-5G-RNP&RNO V2.0, you will be able to get your dream job. Make sure that you are buying our bundle H35-581_V2.0 brain dumps pack so you can check out all the products that will help you come up with a better solution. You can easily land a dream job by passing the H35-581_V2.0 Exam in the first attempt.
| Section | Objectives |
|---|---|
| Radio Network Optimization | - Interference analysis and mitigation - Mobility optimization - KPI analysis and optimization |
| Troubleshooting and Performance Enhancement | - Fault diagnosis in 5G networks - Performance tuning methods |
| 5G Radio Network Fundamentals | - Radio access network basics - 5G NR system architecture and principles |
| Radio Network Planning | - Capacity planning - Site selection and dimensioning - Coverage planning |
>> Reliable H35-581_V2.0 Test Blueprint <<
You will find the same ambiance and atmosphere when you attempt the real Huawei H35-581_V2.0 exam. It will make you practice nicely and productively as you will experience better handling of the HCIP-5G-RNP&RNO V2.0 questions when you take the actual Huawei H35-581_V2.0 Exam to grab the Huawei H35-581_V2.0 certification.
NEW QUESTION # 15
Notification Control indicates whether the gNodeB must notify the core network when which of the following parameters can no longer be met?
Answer: C
Explanation:
The Guaranteed Flow Bit Rate (GFBR) is the correct answer because Notification Control enables the NG- RAN to notify the 5G Core when the guaranteed Quality of Service (QoS) requirements associated with a GBR QoS flow can no longer be fulfilled.
In the 5G QoS architecture, each QoS flow has a QoS profile containing parameters such as the 5G QoS Identifier (5QI), Allocation and Retention Priority (ARP), and additional bit-rate parameters where applicable.
For Guaranteed Bit Rate (GBR) QoS flows, GFBR specifies the bit rate that the network is expected to guarantee under the established QoS requirements.
When Notification Control is enabled, the NG-RAN evaluates whether the configured QoS characteristics remain achievable.
If the requested QoS profile cannot be satisfied, the NG-RAN can send a notification toward the Session Management Function (SMF) indicating that GFBR can no longer be guaranteed.
The standardized assessment may consider GFBR, Packet Delay Budget (PDB), and Packet Error Rate (PER).
The remaining parameters serve different purposes.
Session-AMBR limits aggregate bit rates for applicable non-GBR traffic within a PDU session.
UE-AMBR controls aggregate non-GBR traffic associated with the UE.
MFBR defines the maximum flow bit rate rather than the guaranteed flow bit rate.
Therefore, GFBR is the correct parameter.
Official Reference: 3GPP TS 23.501, Section 5.7.2.4, Notification Control .
NEW QUESTION # 16
Which of the following statements regarding throughput-related indicators is incorrect?
Answer: C
Explanation:
Option A is incorrect under the standardized burst-based throughput measurement methodology because including the final small transmission interval can distort the measured throughput.
In NR performance management, throughput measurements are intended to represent radio transmission performance rather than the average application traffic rate across periods containing idle time.
The relevant measurement procedure distinguishes intervals during which the transmission buffer contains data from intervals when the buffer becomes empty.
The final transmission interval of a data burst may carry only a small residual packet. Including its duration and data volume can introduce a packet-size-dependent effect into the calculated throughput.
3GPP TS 28.554 therefore defines an extended throughput measurement method that excludes the final slot of the burst from the applicable calculation.
Option B is correct because average uplink and downlink UE throughput are used to assess radio-network performance as experienced by users.
Option C describes the general relationship between transmitted data volume and applicable active transmission time, subject to the precise measurement definitions.
Option D expresses a comparable throughput relationship at cell level, although its wording is less precise than the standardized KPI definitions.
Therefore, option A contradicts the specified throughput methodology.
Official Reference: 3GPP TS 28.554, Section 6.3.6.2, Extended Definition of Throughput , Figure 1; TS
28.552, 5G Performance Measurements .
NEW QUESTION # 17
Which of the following parameters relate to open-loop power control for PUCCH power control?
Select All that Apply
Answer: A,B,D
Explanation:
Options A, B, and C are the intended answers because the 5G NR Physical Uplink Control Channel (PUCCH) transmit-power calculation depends on subcarrier spacing, allocated radio resources, and format-dependent control-information characteristics.
PUCCH carries Uplink Control Information (UCI), including HARQ acknowledgments, Scheduling Requests (SR), and Channel State Information (CSI).
PUCCH power control combines open-loop parameters with dynamically accumulated closed-loop Transmit Power Control (TPC) adjustments.
The open-loop component establishes a transmission-power baseline using configured power offsets, downlink path-loss estimation, and the transmission-resource configuration.
Option A - PUCCH SCS: Subcarrier spacing contributes to the bandwidth-dependent term of the PUCCH transmit-power formula.
Option B - UCI format: The intended concept concerns PUCCH format and UCI payload-dependent adjustments. Different PUCCH formats have different symbol structures, payload capacities, and associated power-adjustment requirements.
Option C - Number of RBs: The allocated PUCCH Resource Blocks affect transmission bandwidth and the corresponding power calculation.
Option D - PUCCH MCS: Unlike PUSCH, PUCCH power control does not use a conventional PUCCH MCS index as an independent open-loop power-control parameter.
Consequently, options A, B, and C correctly identify the relevant factors in the intended examination context.
Official Reference: 3GPP TS 38.213, Section 7.2.1, PUCCH Transmit Power ; TS 38.331, PUCCH- PowerControl Configuration .
Technical warning / qualification: The original option B states UCI format . The standards use the more precise concepts of PUCCH format and UCI payload-dependent adjustments. For technical accuracy, this option should be revised before publication. The original wording has been preserved above.
NEW QUESTION # 18
For both the VoNR and EPS fallback solutions, the 5GC must interwork with the IMS.
Answer: A
Explanation:
The statement is true because both Voice over New Radio (VoNR) and Evolved Packet System (EPS) fallback provide voice services through the IP Multimedia Subsystem (IMS), although the radio-access and core-network procedures used to deliver the voice session differ.
In a VoNR deployment, the UE maintains its connection to the 5G Core (5GC) through NR. IMS signaling and media traffic are transported over an appropriate PDU session, with the 5GC supporting QoS-flow establishment, policy enforcement, and connectivity to the IMS network.
The Session Management Function (SMF) manages the corresponding PDU session, while the User Plane Function (UPF) provides user-plane connectivity toward the IMS data network.
EPS fallback applies when the 5G system cannot provide the required IMS voice service directly over its existing radio access.
In this case, the 5GC and NG-RAN coordinate a handover or redirection toward LTE connected to the EPC.
IMS voice establishment or continuation then takes place over the EPS.
Importantly, EPS fallback does not mean that the voice-media path remains anchored in the 5GC after fallback. It means that the 5G system participates in IMS voice-service support and coordinates access to EPS when necessary.
Official Reference: 3GPP TS 23.501, Sections 5.16.3.1-5.16.3.10, IMS Support and IMS Voice Service via EPS Fallback .
NEW QUESTION # 19
Which of the following network-capability requirements apply to vehicle platooning in V2V?
Select All that Apply
Answer: A,B,D
Explanation:
Vehicle platooning involves multiple vehicles traveling cooperatively while maintaining coordinated distances, speeds, and driving behavior.
Vehicle-to-Vehicle (V2V) communication supports the exchange of information such as vehicle position, velocity, acceleration, braking intentions, and cooperative driving commands.
Option A - 10-40 Mbit/s: The material identifies this data-rate range as a capability requirement for the specified platooning scenario.
Option C - Reliability above 99.999%: The question bank uses this stringent reliability target to characterize communications intended to support safety-critical vehicle coordination.
Option D - Latency of 1-10 ms: This range represents the low-latency objective assumed by the question.
Rapid delivery of coordination messages can be important when vehicles operate with short inter-vehicle gaps.
Option B is excluded under that assumed profile because its upper latency bound is substantially higher.
However, these exact figures are not established as universal vehicle-platooning requirements by 3GPP TS 22.186 . Its vehicle-platooning table specifies scenario-dependent figures, including 10-25 ms latency, reliability values up to 99.99% where explicitly stated, and data-rate requirements that can reach 65 Mbit/s.
Therefore, A, C, and D are the supplied course-bank answer, not an independently standards-confirmed combination.
Official Reference: 3GPP TS 22.186, Section 5.2, Table 5.2-1, Performance Requirements for Vehicles Platooning .
NEW QUESTION # 20
......
If you don't work hard to improve your strength, you can't get the chance you want. Without chance, you will not be able to obtain your desired status and salary. This society is such a reality. It is also fair. Every year, many people purchase our H35-581_V2.0 study materials. With the help of our H35-581_V2.0 Exam Braindumps, they successfully passed the exam and got the certification, and became more and more successful than before. So if you buy our H35-581_V2.0 practice questions, you will have a brighter future!
Hot H35-581_V2.0 Questions: https://www.dumpkiller.com/H35-581_V2.0_braindumps.html