BTW, DOWNLOAD part of Actualtests4sure EDGE-Expert dumps from Cloud Storage: https://drive.google.com/open?id=1__O7BYC9fYxmpjvtQWMG6XeZl4O6IbT6
With our users all over the world, you really should believe in the choices of so many people. Our advantage is very obvious. Of course, the right to choose is in your hands. What I want to say is that if you are eager to get an international EDGE-Expert Certification, you must immediately select our EDGE-Expert preparation materials. After you have studied for twenty to thirty hours on our EDGE-Expert exam questions, you can take the test. And your pass rate will reach 99%.
| Section | Weight | Objectives |
|---|---|---|
| EDGE Fundamentals & Framework | 20% | - Certification levels and criteria
|
| EDGE Software & Application | 10% | - Project documentation
|
| Materials & Embodied Carbon | 15% | - Low-impact material selection
|
| Certification Process & Roles | 10% | - Role of EDGE Expert
|
| Energy Efficiency | 25% | - Energy baseline calculation
|
| Water Efficiency | 20% | - Water baseline assessment
|
>> New EDGE-Expert Dumps Book <<
In the past ten years, our company has never stopped improving the EDGE-Expert study materials. For a long time, we have invested much money to perfect our products. The job with high pay requires they boost excellent working abilities and profound major knowledge. Passing the EDGE-Expert exam can help you find the job you dream about, and we will provide the best EDGE-Expert question torrent to the client. We are aimed that candidates can pass the exam easily. The study materials what we provide is to boost pass rate and hit rate, you only need little time to prepare and review, and then you can pass the EDGE-Expert exam.
NEW QUESTION # 28
In the EDGE software, what is the unit of the embodied carbon of the material?
Answer: C
Explanation:
Embodied carbon in EDGE refers to the carbon emissions associated with the production, transportation, and installation of building materials, a key metric for materials efficiency. The EDGE User Guide specifies how this is measured: "In the EDGE software, the embodied carbon of materials is quantified in kilograms of carbon dioxide equivalent (kgCO2), reflecting the total greenhouse gas emissions associated with the material' s lifecycle, from extraction to installation"(EDGE User Guide, Section 7.2: Materials Efficiency Measures).
Option A, kgCO2, directly matches this unit, as EDGE uses kgCO2 to standardize carbon emissions across materials, allowing for comparison and aggregation in the software's results. Option B (MJ) is incorrect, as MJ (megajoules) measures embodied energy, not carbon: "Embodied energy in EDGE is measured in MJ, representing the energy consumed in material production, while embodied carbon is separately calculated in kgCO2 to assess environmental impact" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Option C (BTU) is also incorrect, as BTU (British Thermal Units) is an energy unit not used in EDGE for carbon calculations: "EDGE uses metric units like MJ for energy and kgCO2 for carbon; BTU is not a standard unit in the software" (EDGE User Guide, Section 2.3: Using the EDGE App). Option D (kWh) is another energy unit, typically used for operational energy, not embodied carbon: "kWh is used in EDGE to measure operational energy consumption, such as electricity use, but not for embodied carbon, which is always in kgCO2" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). The EDGE User Guide further clarifies: "The software displays embodied carbon in kgCO2 to align with global carbon accounting standards, enabling users to understand the environmental footprint of their material choices" (EDGE User Guide, Section 7.2: Materials Efficiency Measures). The EDGE Methodology Report adds: "For example, concrete might have an embodied carbon of 0.15 kgCO2 per kg, allowing users to compare materials like fly ash concrete versus standard concrete in terms of carbon impact" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Thus, the unit of embodied carbon in EDGE is kgCO2 (Option A).
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials, Section
5.2: Energy Calculation Methods.
NEW QUESTION # 29
Utility cost savings are calculated based on reduction in total:
Answer: B
Explanation:
Utility cost savings in EDGE are calculated based on reductions in resource consumption sourced from the supply grid, as these are the costs directly borne by the building owner. The EDGE User Guide explains:
"Utility cost savings in EDGE are calculated based on the reduction in energy and water consumption from the supply grid, using local tariffs for electricity and water to convert resource savings into financial savings" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option D, energy and water consumption from the supply grid, aligns with this definition, focusing on grid-supplied resources. Option A (electricity and water consumption) is partially correct but lacks specificity about the source: "Electricity and water must be grid-supplied to be included in utility cost savings; onsite generation is excluded" (EDGE Methodology Report Version2.0, Section 4.4: Cost Savings Calculations). Option B (generator fuel and water consumption) is incorrect, as generator fuel is not part of utility cost savings: "Generator fuel costs are not included in utility savings, as EDGE focuses on grid-supplied utilities" (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option C (building energy and water consumption) is too broad, including onsite sources: "Building consumption includes all sources, but utility savings are grid-specific" (EDGE Methodology Report Version
2.0, Section 4.4: Cost Savings Calculations). Thus, energy and water from the supply grid (Option D) is the correct basis for utility cost savings.
Reference:EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
NEW QUESTION # 30
A project certificate that meets the EDGE Zero Carbon criteria fully on-site providing generation of on-site renewable electricity, will expire every
Answer: B
Explanation:
Under the CBCI EDGE curriculum, EDGE Certified and EDGE Advanced are one-time certifications and do not require renewal. EDGE Zero Carbon is treated differently because it depends on ongoing operational conditions, especially how the building's remaining operational emissions are addressed through renewable electricity and, where applicable, offsets. For this reason, EDGE Zero Carbon certificates include an expiration date and require renewal to confirm that the carbon strategy remains valid over time.
The EDGE Zero Carbon rules specify different expiration periods depending on how the project achieves the renewable electricity and emissions balance. When a project meets the EDGE Zero Carbon criteria fully on- site, including the generation of on-site renewable electricity, the certificate expires after four years. This longer validity period reflects the higher confidence and stability associated with on-site renewable generation that is physically tied to the building and less dependent on external contracts or market instruments.
By comparison, projects that rely on purchased off-site renewable electricity and or carbon offsets have a shorter certificate validity period because procurement terms and availability can change. Therefore, for a fully on-site renewable electricity EDGE Zero Carbon project, the correct expiration period is four years.
NEW QUESTION # 31
In EDGE software, occupancy sensors are used for controlling:
Answer: B
Explanation:
Occupancy sensors in the EDGE software are part of energy efficiency measures aimed at reducing unnecessary energy use by automating system operation based on occupant presence. The EDGE User Guide explicitly defines their application: "Occupancy sensors in EDGE are used for controlling lighting in internal areas, automatically turning lights off when spaces are unoccupied to reduce energy consumption. This measure, often listed as EEM23 - Occupancy Sensors for Lighting, can achieve significant savings in buildings with intermittent occupancy, such as offices or schools" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, lighting, directly matches this description, as occupancy sensors are primarily associated with lighting control in EDGE. Option B (water taps) is incorrect, as occupancy sensors are not used for water systems in EDGE: "Water taps may be controlled by sensors in some projects, but this is not a recognized measure in EDGE, which focuses on measures like low-flow fixtures for water savings" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option C (air conditioners) is also incorrect, as occupancy sensors for HVAC are not a standard measure in EDGE: "While occupancy sensors can theoretically control air conditioners, EDGE does not include this as a measure; HVACefficiency is addressed through measures like variable speed drives or efficient chillers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option D (external lighting) is not applicable, as EDGE specifies occupancy sensors for internal areas: "Occupancy sensors in EDGE are applied to internal lighting, not external lighting, which may use timers or photocells instead" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Methodology Report further confirms: "The energy savings from occupancy sensors in EDGE are calculated based on reduced lighting hours in internal spaces, reflecting typical usage patterns in commercial buildings" (EDGE Methodology Report Version 2.0, Section 5.4:
Lighting Calculations). Thus, occupancy sensors are used for controlling lighting (Option A).
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.4: Lighting Calculations.
NEW QUESTION # 32
How many measures need to be selected in order to meet the EDGE Energy Standard?
Answer: C
Explanation:
In the EDGE system, compliance with the Energy Standard is not achieved by selecting a fixed number or a fixed percentage of measures. Instead, the project must demonstrate that the selected package of energy measures, when modeled in the EDGE software, achieves the minimum required energy savings compared to the local baseline. Because projects differ by climate, building type, geometry, and system choices, the number of measures needed can vary widely. One project might reach the target with a few high-impact measures, while another may need many smaller improvements.
At the same time, the curriculum explains that some measures are marked as required. These are mandatory prerequisites within the EDGE methodology and must be implemented where applicable. A project cannot claim compliance while omitting required measures. Therefore, while you may choose any combination of optional measures to reach the energy savings threshold, you must still implement all required measures as part of meeting EDGE requirements.
Options A, B, and C incorrectly imply a universal count-based rule. The only correct statement is that the project must implement at least all required measures, and then add any additional measures necessary to achieve the minimum energy savings target.
NEW QUESTION # 33
......
Which kind of EDGE-Expert certificate is most authorized, efficient and useful? We recommend you the EDGE-Expert certificate because it can prove that you are competent in some area and boost outstanding abilities. If you buy our EDGE-Expert Study Materials you will pass the test smoothly and easily. We boost professional expert team to organize and compile the EDGE-Expert training guide diligently and provide the great service.
Exam EDGE-Expert Tests: https://www.actualtests4sure.com/EDGE-Expert-test-questions.html
P.S. Free 2026 EDGE EDGE-Expert dumps are available on Google Drive shared by Actualtests4sure: https://drive.google.com/open?id=1__O7BYC9fYxmpjvtQWMG6XeZl4O6IbT6