2026 Latest TestkingPass EDGE-Expert PDF Dumps and EDGE-Expert Exam Engine Free Share: https://drive.google.com/open?id=1RlDITdwAe1abx9hZf-VdTAFKy3NaSUvR
Time is nothing; timing is everything. Stop hesitating. EDGE-Expert VCE dumps help you save time to clear exam. If you choose valid exam files, you will pass exams one-shot; you will obtain certification in the shortest time with our EDGE VCE dumps. If you complete for a senior position just right now, you will have absolutely advantage over others. Now, don't wasting time again, just start from our EDGE-Expert VCE Dumps. Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Energy Efficiency | 25% | - Energy baseline calculation
|
| Topic 2: EDGE Software & Application | 10% | - Project documentation
|
| Topic 3: Certification Process & Roles | 10% | - Role of EDGE Expert
|
| Topic 4: EDGE Fundamentals & Framework | 20% | - Core principles of EDGE
|
| Topic 5: Water Efficiency | 20% | - Water baseline assessment
|
| Topic 6: Materials & Embodied Carbon | 15% | - Embodied energy baseline
|
>> New EDGE-Expert Test Objectives <<
Instant answer feedback allows you to identify your vulnerabilities in a timely manner, so as to make up for your weaknesses. With our EDGE-Expert practice quiz, you will find that the preparation process is not only relaxed and joyful, but also greatly improves the probability of passing the EDGE-Expert Exam. And our pass rate of the EDGE-Expert training materials is high as 98% to 100%. You are bound to pass the exam if you buy our EDGE-Expert learning guide.
NEW QUESTION # 105
Which of the following building types is NOT covered by EDGE?
Answer: D
Explanation:
EDGE certification applies to specific building typologies that align with its focus on resource efficiency in new constructions and major renovations. The EDGE User Guide lists the covered building types: "EDGE certification is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. These typologies are selected because they have predictable energy, water, and materials usage patterns that can be modeled in the EDGE software" (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option A (hospitals), Option B (schools), and Option D (warehouses) are explicitly included in this list, making them eligible for EDGE certification. However, Option C (factories - heavy industry) is not covered, as clarified in the EDGE Certification Protocol: "Heavy industry factories are not covered by EDGE, as their energy and water usage patterns are highly variable and process-driven, making them unsuitable for the standardized modeling approach used in EDGE. Light industry buildings, such as small manufacturing facilities with predictable usage, are included, but heavy industry, such as steel production or chemical manufacturing, is excluded" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE Methodology Report further explains: "Heavy industry factories involve complex industrial processes that dominate resource consumption, which cannot be accurately modeled using EDGE's simplified methodology, unlike hospitals, schools, or warehouses, which have more consistent occupancy and usage patterns" (EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach). The EDGE User Guide also notes: "Building types like heavy industry factories are outside the scope of EDGE, as the software is designed for commercial and residential buildings with typical HVAC, lighting, and water demands" (EDGE User Guide, Section 1.2: Scope of EDGE Certification).
Therefore, factories (heavy industry) (Option C) is the building type not covered by EDGE.
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard; EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach.
NEW QUESTION # 106
Which of the following properties of glass are used in EDGE?
Answer: C
Explanation:
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
NEW QUESTION # 107
What is a valid use for collected rainwater to qualify for savings under EDGE?
Answer: C
Explanation:
In the EDGE water assessment, rainwater harvesting contributes to savings only when the collected rainwater is used to directly reduce the building's demand for potable or municipal water. The curriculum explains that qualifying water savings must come from substituting potable water in recognized end uses such as toilet flushing, irrigation, and cooling tower make-up water where applicable. When rainwater is used as make-up water for cooling towers, it displaces treated potable water that would otherwise be required for heat rejection systems, and this reduction is captured in the EDGE software water calculations.
By contrast, options such as groundwater recharge or simply redirecting rainwater to drains or nearby water bodies do not reduce the building's potable water consumption. These actions may be beneficial for stormwater management, flood control, or environmental protection, but they do not represent a direct offset of the building's indoor or process water demand in the way EDGE quantifies water savings for certification.
Therefore, the valid use that qualifies for EDGE water savings in this question is using collected rainwater for cooling towers.
NEW QUESTION # 108
For a project in a hot and dry climate with no air-conditioning system, which of the following will NOT have an impact on the occupants' thermal comfort?
Answer: D
Explanation:
In a hot and dry climate without air-conditioning, thermal comfort relies on passive design strategies that reduce heat gain or improve air movement. The EDGE User Guide discusses passive measures for thermal comfort: "In hot climates without air-conditioning, thermal comfort can be improved through ceiling fans, which enhance air movement, solar shading, which reduces solar heat gain, and wall and roof insulation, which minimizes heat transfer into the building" (EDGE User Guide, Section 3.5: Passive Design Strategies).
Option A (ceiling fans) improves air movement, directly impacting thermal comfort: "Ceiling fans increase air speed, enhancing evaporative cooling on occupants' skin" (EDGE Methodology Report Version 2.0, Section
5.5: Thermal Comfort Measures). Option B (solar shading) reduces heat gain, improving comfort: "External shading reduces solar radiation entering the building, lowering indoor temperatures" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (wall and roof insulation) also enhances comfort by reducing heat transfer: "Insulation lowers the U-value of the building envelope, maintaining cooler indoor temperatures" (EDGE User Guide, Section 4.1: Insulation Measures). Option D (solar photovoltaics) generates electricity but does not directly affect thermal comfort in a building without air-conditioning: "Solar photovoltaics contribute to energy supply but do not directly influence indoor thermal comfort unless used to power cooling systems, which are absent in this scenario" (EDGE Methodology Report Version 2.0, Section
5.3: Energy Measures). Thus, solar photovoltaics (Option D) will not impact thermal comfort in this context.
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures; EDGE Methodology Report Version 2.0, Section 5.5: Thermal Comfort Measures, Section 5.3:
Energy Measures.
NEW QUESTION # 109
Who are licensed to train candidates as EDGE Experts and EDGE Auditors?
Answer: A
Explanation:
Training for EDGE Experts and Auditors is a structured process managed by specific entities authorized by the IFC. The EDGE Expert and Auditor Protocols specify: "EDGE Faculty are licensed by IFC to deliver training for candidates aspiring to become EDGE Experts and EDGE Auditors. These trainers are selected and trained by IFC to ensure consistency and quality in the delivery of EDGE training programs" (EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements). Option A, EDGE Faculty, directly matches this description. Option B (EDGE Auditors) is incorrect, as auditors perform audits, not training, per the protocols: "EDGE Auditors are responsible for verifying project compliance, not for training others" (EDGE Expert and Auditor Protocols, Section 2.2: Roles). Option C (EDGE Certification Providers) is also incorrect, as their role is to issue certifications, not conduct training: "Certification Providers like GBCI issue EDGE certificates but do not train candidates" (EDGE Certification Protocol, Section 1.3: Certification Process).
Option D (Accredited EDGE Experts) is wrong, as Experts advise on projects, not train others, as per the protocols: "EDGE Experts provide consultancy services to project teams" (EDGE Expert and Auditor Protocols, Section 2.1: Roles).
Reference:EDGE Expert and Auditor Protocols, Section 3.2: Training Requirements, Section 2.1: Roles, Section 2.2: Roles; EDGE Certification Protocol, Section 1.3: Certification Process.
NEW QUESTION # 110
......
Our EDGE-Expert preparation exam have assembled a team of professional experts incorporating domestic and overseas experts and scholars to research and design related exam bank, committing great efforts to help the candidates to pass the EDGE-Expert exam. Most of the experts have been studying in the professional field for many years and have accumulated much experience in our EDGE-Expert Practice Questions. Our company is considerably cautious in the selection of talent and always hires employees with store of specialized knowledge and skills to help you get the dreaming EDGE-Expert certification.
EDGE-Expert Reliable Exam Book: https://www.testkingpass.com/EDGE-Expert-testking-dumps.html
BONUS!!! Download part of TestkingPass EDGE-Expert dumps for free: https://drive.google.com/open?id=1RlDITdwAe1abx9hZf-VdTAFKy3NaSUvR