BTW, DOWNLOAD part of DumpsQuestion SD-WAN-Engineer dumps from Cloud Storage: https://drive.google.com/open?id=1oeLaK-otIQvcRvJ2hlYUq1E2VjGOwnF5
Our Palo Alto Networks SD-WAN-Engineer exam questions have gained wide popularity among candidates. Almost all customers are willing to introduce our SD-WAN-Engineer practice quiz to their classmates and friends. And sometimes, they may buy our exam products together. After they have tried our study materials, most of them have successfully passed the Palo Alto Networks SD-WAN-Engineer Exam and made a lot of money.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Deployment and Configuration | 26% | - Template configuration and site-specific settings - Integration with Prisma Access and security services - Routing protocols and segmentation (VRF) - Initial setup and onboarding of Prisma SD-WAN devices |
| Topic 2: Unified SASE Integration | 10% | - Identity and IoT integration - ADEM configuration and monitoring - Prisma SD-WAN + Prisma Access integration |
| Topic 3: Planning and Design | 24% | - Architecture and requirements analysis - Device selection and licensing planning - Network design, high availability, and security requirements - Policy design for routing, QoS, NAT, and path selection |
| Topic 4: Troubleshooting | 20% | - Path selection and security troubleshooting - Using Co-pilot and logs for diagnostics - Application performance and policy validation - Connectivity and routing issue resolution |
| Topic 5: Operations and Monitoring | 20% | - Configuration management and upgrades - Analytics and reporting for optimization - Monitoring tools, alerts, and event management - WAN Clarity reports and performance visibility |
>> SD-WAN-Engineer Question Explanations <<
DumpsQuestion wants to win the trust of Palo Alto Networks SD-WAN-Engineer exam candidates at any cost. To achieve this objective DumpsQuestion is offering some top features with SD-WAN-Engineer exam practice questions. These prominent features hold high demand and are specifically designed for quick and complete Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam questions preparation.
NEW QUESTION # 74
In the Prisma SD-WAN portal, an administrator is viewing the "Media" analytics for a branch site to troubleshoot complaints about poor voice quality.
When calculating the Mean Opinion Score (MOS) for voice traffic, which two metrics does the system prioritize active monitoring for, even when no user voice traffic is present on the link? (Choose two.)
Answer: A,B
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN calculates the Mean Opinion Score (MOS) to provide a standardized metric (1-5) for voice quality. To ensure the system always knows the "voice readiness" of a path-even before a call starts-it uses Active Probes (synthetic UDP packets).
While latency is measured, the MOS calculation algorithm is most heavily penalized by Packet Loss (D) and Jitter (B).
Packet Loss: Even a small amount of loss (e.g., >1%) dramatically reduces voice clarity, causing dropouts.
Jitter: High variance in packet arrival time (jitter) causes the "robotic" voice effect and buffer underruns.
The system continuously measures these specific metrics on all WAN links using synthetic probes. If the packet loss or jitter exceeds the threshold defined in the "Path Quality Profile" (e.g., Voice Profile), the path is marked as non-compliant, and the MOS score drops, triggering a policy action to move the flow. Throughput (C) is less critical for voice as calls consume very little bandwidth (e.g., 64-100 Kbps), making congestion (loss/jitter) the primary enemy, not raw speed.
NEW QUESTION # 75
A customer wants to deploy Prisma SD-WAN ION devices at small home offices that use consumer-grade broadband routers. These routers typically use Symmetric NAT and do not allow static port forwarding.
Which standard mechanism does Prisma SD-WAN utilize to successfully establish direct Branch-to-Branch (Dynamic) VPN tunnels through these Symmetric NAT devices?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes STUN (Session Traversal Utilities for NAT) to facilitate NAT Traversal for its Secure Fabric overlay.
* Discovery: When an ION device connects to the internet behind a NAT router, it reaches out to the Prisma SD-WAN Controller. The controller acts as a STUN server, identifying the public IP address and port that the ION's traffic is originating from.
* Symmetric NAT Challenge: In Symmetric NAT, the mapping changes for every destination.
However, the Prisma SD-WAN architecture is designed to handle this by having the controller coordinate the connection attempt.
* Hole Punching: The controller shares the discovered public mapping information between two peer ION devices. They then simultaneously initiate traffic to each other's public IP/Port (a technique called
"UDP Hole Punching"). This tricks the intermediate NAT devices into allowing the inbound traffic, establishing a direct P2P IPSec tunnel without requiring manual port forwarding or static IPs at the edge.
NEW QUESTION # 76
A customer wants to deploy Prisma SD-WAN ION devices at small home offices that use consumer-grade broadband routers. These routers typically use Symmetric NAT and do not allow static port forwarding.
Which standard mechanism does Prisma SD-WAN utilize to successfully establish direct Branch-to-Branch (Dynamic) VPN tunnels through these Symmetric NAT devices?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
Prisma SD-WAN utilizes STUN (Session Traversal Utilities for NAT) to facilitate NAT Traversal for its Secure Fabric overlay.
Discovery: When an ION device connects to the internet behind a NAT router, it reaches out to the Prisma SD-WAN Controller. The controller acts as a STUN server, identifying the public IP address and port that the ION's traffic is originating from.
Symmetric NAT Challenge: In Symmetric NAT, the mapping changes for every destination. However, the Prisma SD-WAN architecture is designed to handle this by having the controller coordinate the connection attempt.
Hole Punching: The controller shares the discovered public mapping information between two peer ION devices. They then simultaneously initiate traffic to each other's public IP/Port (a technique called "UDP Hole Punching"). This tricks the intermediate NAT devices into allowing the inbound traffic, establishing a direct P2P IPSec tunnel without requiring manual port forwarding or static IPs at the edge.
NEW QUESTION # 77
When planning a software upgrade for a large fleet of ION devices, what is the recommended best practice regarding the "Software Version" assigned in the Site Summary?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
The best practice for managing upgrades in a large-scale Prisma SD-WAN environment is the Canary or Phased Rollout approach, utilizing Site Tags.
* Risk Mitigation: Upgrading all sites simultaneously (Option B) is highly risky. If the new software version has an unforeseen bug or compatibility issue with a specific circuit type, the entire network could face an outage.
* Tag-Based Management: Administrators should create tags such as "Upgrade-Phase-1" (Pilot sites) or
"Region-North". By assigning the specific Software Version to the Tag (rather than the individual site or the global default), the controller pushes the update only to that subset of devices.
* Procedure:
* Apply update to "Pilot" tag (5 sites). Monitor for 24-48 hours.
* Apply update to "Region-1" tag (50 sites). Monitor.
* Eventually, update the Global default once confidence is high.
Option A is unscalable, and Option D is incorrect as the administrator retains full control over when upgrades occur; they are not forced automatically without policy configuration.
NEW QUESTION # 78
In a Data Center deployment, what is the key functional difference between configuring a BGP neighbor as a "Core Peer" versus an "Edge Peer"?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
In the Prisma SD-WAN Data Center (DC) model, the terminology for BGP peers defines their role in the topology and how the system generates route maps.
Core Peer: This peer type is designated for the LAN-side connection (facing the DC Core Switch or internal Routers). Its primary purpose is to learn the subnets/prefixes hosted in the data center so the ION can advertise them to the remote branches. The system automatically creates route maps to facilitate this redistribution into the fabric.
Edge Peer: This peer type is designated for the WAN-side connection (facing the Edge Router or MPLS PE). Its primary purpose is to provide reachability to the underlay network.
Distinction: Selecting the correct type affects the default Route Maps and Prefix Lists generated by the controller. Configuring a Core Peer correctly ensures that the DC's internal subnets are properly learned and propagated to the overlay, whereas an Edge Peer configuration focuses on WAN next-hop reachability.
NEW QUESTION # 79
......
With the development of the times, civilization is in progress, as well as DumpsQuestion. In order to help you get the SD-WAN-Engineer exam certification to own a bright future as soon as possible, and you can get well-paid, DumpsQuestion has always been working hard. With efforts for years, the passing rate of DumpsQuestion SD-WAN-Engineer Certification Exam has reached as high as 100%. Choose DumpsQuestion is to choose success
Valid SD-WAN-Engineer Exam Question: https://www.dumpsquestion.com/SD-WAN-Engineer-exam-dumps-collection.html
BTW, DOWNLOAD part of DumpsQuestion SD-WAN-Engineer dumps from Cloud Storage: https://drive.google.com/open?id=1oeLaK-otIQvcRvJ2hlYUq1E2VjGOwnF5