Our NSEI_OTS_AR-7.6 exam cram is famous for instant access to download, and you can receive the downloading link and password within ten minutes, and if you don’t receive, you can contact us, and we will give you reply as quickly as possible. In addition, NSEI_OTS_AR-7.6 exam materials are high quality, and we can ensure you that you can pass the exam just one time. We have free demo for you to have a try before buying NSEI_OTS_AR-7.6 Exam Materials, so that you can have a deeper understanding of what you are going to buy. Free update for one year for NSEI_OTS_AR-7.6 training materials is also available.
| Section | Weight | Objectives |
|---|---|---|
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - OT security standards and compliance (IEC 62443, NIST) - Device detection and inventory using FortiGate & FortiNAC |
| Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
| Monitoring and Risk Assessment | 25% | - OT-focused risk assessment and management - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 |
>> Latest NSEI_OTS_AR-7.6 Braindumps <<
The operation of our NSEI_OTS_AR-7.6 exam torrent is very flexible and smooth. Once you enter the interface and begin your practice on our windows software. You will easily find there are many useful small buttons to assist your learning. The correct answer of the NSEI_OTS_AR-7.6 exam torrent is below every question, which helps you check your answers. We have checked all our answers. You just need to wait a few seconds before knowing your scores. The scores are calculated by every question of the NSEI_OTS_AR-7.6 Exam guides you have done. So the final results will display how many questions you have answered correctly and mistakenly. You even can directly know the score of every question, which is convenient for you to know the current learning condition.
NEW QUESTION # 16
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 17
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 18
For the installation of your first FortiGate device, you want to minimize the impact in your OT network.
Therefore, you deploy it initially as an offline IDS. Which two statements about this deployment are correct?
(Choose two answers)
Answer: B,C
Explanation:
Deploying a FortiGate in offline IDS (also known as one-arm sniffer mode) is a common strategy in OT environments for several reasons found in the study guide:
* Priority of Availability : In OT, availability and safety are critically important and prioritized higher than in IT. An offline IDS minimizes impact because it does not sit in the direct path of production traffic.
* Network Sensor Role : In this mode, the FortiGate is connected to a mirror/SPAN port on a switch. It acts as a network sensor , receiving a copy of the traffic rather than having the traffic flow through it.
This confirms Statement A is correct and Statement D is incorrect.
* Passive vs. Active : The guide explicitly states that in OT environments, passive methods are preferred over active methods to avoid negatively impacting performance or causing process interruptions.
* Depth of Visibility : Even though the device is offline, you apply security profiles (such as IPS, Application Control, and Antivirus) to the sniffer interface. This allows the FortiGate to analyze the copied traffic and provide deep visibility into the OT assets and their behaviors. This confirms Statement B is correct.
* Detection vs. Prevention : An IDS (Intrusion Detection System) is passive ; it can detect threats but cannot reset connections or drop packets to block attacks. Therefore, it cannot block zero-day attacks, making Statement C incorrect.
NEW QUESTION # 19
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 20
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 21
......
Our to-the-point and trustworthy Fortinet Fortinet NSE I - OT Security 7.6 Architect Exam Questions in three formats for the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) certification exam will surely assist you to qualify for Fortinet NSEI_OTS_AR-7.6 certification. Do not underestimate the value of our Fortinet NSEI_OTS_AR-7.6 Exam Dumps because it is the make-or-break point of your career. Therefore, make the most of this opportunity of getting these superb exam questions for the Financials in Fortinet NSEI_OTS_AR-7.6 certification exam.
NSEI_OTS_AR-7.6 Authorized Test Dumps: https://www.dumpstillvalid.com/NSEI_OTS_AR-7.6-prep4sure-review.html