Reliable JN0-364 Exam Braindumps & JN0-364 Upgrade Dumps

P.S. Free & New JN0-364 dumps are available on Google Drive shared by SureTorrent: https://drive.google.com/open?id=1VbBs7VSWIO6f6yrpIDw08yUiKTerlcN3

There is no doubt that having a JN0-364 certificate is of great importance to our daily life and daily work, it can improve your comprehensive strength when you are seeking for a decent job or competing for an important position, mainly because with JN0-364 certification, you can totally highlight your resume and become more confident in front of your interviewers and competitors. There are many advantages of our JN0-364 question torrent that we are happy to introduce you and you can pass the exam for sure.

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
Topic 1: MPLS and Service Provider Technologies	- MPLS fundamentals 1. LDP operations 2. Label switching and forwarding - VPN services 1. Layer 2 VPN overview 2. Layer 3 VPN concepts
Topic 2: Service Provider Architecture & Junos Fundamentals	- Junos OS routing fundamentals 1. Routing table and forwarding concepts 2. Junos CLI and configuration hierarchy - Service provider network design basics 1. Scalability considerations 2. Core, edge, and access architecture
Topic 3: OSPF and IS-IS Routing Protocols	- OSPF configuration and troubleshooting 1. Areas and LSAs 2. Adjacency and neighbor states - IS-IS operation in service provider networks 1. LSP and SPF calculation 2. Levels and routing hierarchy
Topic 4: Troubleshooting and Operations	- Performance and monitoring 1. System logging and alarms 2. Traffic analysis basics - Network troubleshooting methodology 1. Protocol verification tools 2. Junos operational commands
Topic 5: BGP and Routing Policy	- Routing policy control 1. Route filtering and manipulation 2. Import/export policies - BGP fundamentals 1. Attributes and path selection 2. eBGP and iBGP operations

>> Reliable JN0-364 Exam Braindumps <<

JN0-364 Upgrade Dumps - Intereactive JN0-364 Testing Engine

Confronting a tie-up during your review of the exam? Feeling anxious and confused to choose the perfect JN0-364 latest dumps to pass it smoothly? We understand your situation of susceptibility about the exam, and our JN0-364 test guide can offer timely help on your issues right here right now. Without tawdry points of knowledge to remember, our experts systematize all knowledge for your reference. You can download our free demos and get to know synoptic outline before buying. We offer free demos as your experimental tryout before downloading our Real JN0-364 Exam Questions. For more textual content about practicing exam questions, you can download our products with reasonable prices and get your practice begin within 5 minutes.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q174-Q179):

NEW QUESTION # 174
Which OSPF database packet determines which router is in charge of the database synchronization and the transferring of LSA headers between the two systems?

A. hello
B. database description
C. link-state request
D. link-state update

Answer: B

Explanation:
The Database Description (DD) packets serve two main purposes:
1. determinining which router is in charge of the database synchronization
2. tansferring the LSA headers between the two systems
The Database Description (DBD) OSPF packet is used during the adjacency formation process to describe the contents of the topological database between routers. The routers exchange DBD packets to determine the master and slave relationship, which dictates the router in charge of the database synchronization.

NEW QUESTION # 175
You are deploying an MC-LAG connection at the edge of your network to a new customer. This solution must ensure that traffic uses all available links when forwarding traffic between the two networks.
In this scenario, which two statements are correct? (Choose two.)

A. Transit traffic sent between the two PE devices will use the bundle's member interfaces.
B. Transit traffic sent between the two PE devices will use the ICL interface.
C. You must use active/standby mode when defining the MC-LAG bundle.
D. You must use active/active mode when defining the MC-LAG bundle.

Answer: B,D

NEW QUESTION # 176
Referring to the exhibit, which statement is correct?

A. R1 will advertise only the 10.200.3.0/24 prefix to the 192.168.1.5 neighbor.
B. R1 will advertise the 10.200.1.0/24, 10.200.2.0/24, and 10.200.3.0/24 prefixes to the 192.168.1.5 neighbor.
C. R1 will advertise only the 10.200.1.0/24 prefix to the 192.168.1.5 neighbor.
D. R1 will advertise only the 10.200.2.0/24 prefix to the 192.168.1.5 neighbor.

Answer: A

Explanation:
Referring to the configuration in the exhibit, R1 is set to export the 3rd_Policy to the neighbor at
192.168.1.5. Since 3rd_Policy permits the 10.200.3.0/24 prefix, only that prefix will be advertised to the neighbor.

NEW QUESTION # 177
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state.
What would cause this behavior?

A. The BGP hold time is too short.
B. The peer IP address is incorrect.
C. The BGP group type is set to internal instead of external.
D. The local AS number is missing.

Answer: B

Explanation:
The Idle state indicates that the BGP process is waiting to initiate a connection but cannot establish a TCP session with the configured peer. If the peer IP address is incorrect, the router attempts to connect to a non-existent or wrong neighbor, preventing the TCP session on port 179 from being established and keeping the BGP session in the Idle state.

NEW QUESTION # 178
Which two statements are correct about IS-IS? (Choose two.)

A. For level 2 adjacencies, the area IDs must be the same.
B. A level 1 only router can never form an adjacency with a level 2 only router.
C. A level 1 only router can form an adjacency with a level 2 only router.
D. For level 2 adjacencies, the area IDs can be different.

Answer: B,D

Explanation:
A Level 1 router can become adjacent with the Level 1 and Level 1-2 (L1/L2) router. A Level 2 router can become adjacent with Level 2 or Level 1-2 (L1/L2) router. There is no adjacency between L1 only and L2 only router. HOWEVER: If two routers are in different areas, they can only form a Level 2 adjacency. As such, two routers in different areas can NOT form a Level 1 adjacency. If you want two routers to form a Level 1 adjacency, they have to be in the same area.
IS-IS (Intermediate System to Intermediate System) operates at two levels: Level 1 and Level 2.
Level 1 routers are only aware of their own area's topology, while Level 2 routers have knowledge of the topology across areas. A Level 1 router cannot form an adjacency with a Level 2 router unless the Level 2 router is also operating as a Level 1 router (Level 1-2 router). Level 2 routers can form adjacencies regardless of their area IDs because Level 2 operates at the domain level and is used to interconnect different IS-IS areas.

NEW QUESTION # 179
......

If you want to ace the Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification exam and make a successful career in the Juniper sector, SureTorrent is the right choice for you. Their Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) practice tests and preparation materials are designed to provide you with the best possible chance of passing the Juniper JN0-364 Exam with flying colors. So, don't wait any longer, start your preparation now with SureTorrent!

JN0-364 Upgrade Dumps: https://www.suretorrent.com/JN0-364-exam-guide-torrent.html

P.S. Free & New JN0-364 dumps are available on Google Drive shared by SureTorrent: https://drive.google.com/open?id=1VbBs7VSWIO6f6yrpIDw08yUiKTerlcN3