KoreaDumps EDGE-Expert 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1IQuCMGs6m-bu9qnCswl7WhMKMPisJpaa
EDGE EDGE-Expert 덤프는EDGE EDGE-Expert시험문제변경에 따라 주기적으로 업데이트를 진행하여 저희 덤프가 항상 가장 최신버전이도록 보장해드립니다. 고객님들에 대한 깊은 배려의 마음으로 고품질EDGE EDGE-Expert덤프를 제공해드리고 디테일한 서비스를 제공해드리는것이 저희의 목표입니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 2: EDGE System Overview | 15% | - Understanding the EDGE Standard
|
| Topic 3: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| Topic 4: Energy Efficiency | 25% | - Lighting & Hot Water
|
| Topic 5: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
EDGE 인증 EDGE-Expert시험대비덤프를 찾고 계시다면KoreaDumps가 제일 좋은 선택입니다.저희KoreaDumps에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. KoreaDumps에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. KoreaDumps를 선택하시면 후회하지 않을것입니다.
질문 # 14
The EDGE definition of a green building is a building that uses less resources quantified as
정답：C
설명：
According to the CBCI EDGE curriculum, the foundational definition of an EDGE Certified green building is one that achieves a minimum of 20 percent savings in energy, 20 percent savings in water, and 20 percent reduction in embodied carbon in materials when compared to a local baseline or benchmark defined within the EDGE software. This local benchmark reflects standard building practices, climatic conditions, and typical construction methods for the specific country where the project is located.
The 20-20-20 threshold represents the minimum performance requirement for achieving EDGE Certified status. Higher performance levels, such as EDGE Advanced, require at least 40 percent energy savings but still maintain the 20 percent thresholds for water and materials. Therefore, option B reflects the requirement for EDGE Advanced, not the base definition of a green building under EDGE.
Option C is incorrect because EDGE comparisons are always made against a locally defined baseline, not buildings in other countries. Option D is incorrect because EDGE evaluates embodied carbon in materials, not waste reduction as a core certification metric. Therefore, the correct definition aligns with option A.e, the user type that has access to the Share Subproject function is the Owner.
질문 # 15
Is it possible to be both the EDGE Expert and Auditor on a project?
정답：A
설명：
The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: "An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert's role as a consultant advising the project team could bias the Auditor's objective assessment of the project's compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: "No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: "Allowing dual roles in all cases would undermine the impartiality required for certification" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: "Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: "The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification" (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.
질문 # 16
During a design audit, an EDGE Auditor notices that the project does not meet the EDGE standard for energy.
Which of the following is an acceptable course of action for the Auditor?
정답：B
설명：
The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: "If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor's independence: "The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier" (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: "If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor's experience) oversteps the Auditor's role by offering consultancy: "The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: "During a design audit, the Auditor's role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert" (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: "The Auditor's report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.
질문 # 17
Which of the following protocols should be followed when the project city is not listed in the EDGE App?
정답：C
설명：
The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: "If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project's actual conditions, ensuring accurate calculations" (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: "Users are not required to request new cities; they can proceed by selecting the closest city" (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: "Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: "The capital city should only be selected if it is the nearest available option in the database" (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.
질문 # 18
Which of the following is NOT an option for insulation in materials efficiency measures?
정답：A
설명：
Insulation materials in EDGE are evaluated for their thermal performance and embodied energy as part of materials efficiency measures. The EDGE User Guide lists common insulation options: "In EDGE, insulation materials for walls, roofs, and floors include mineral wool, polyurethane,polystyrene, and fiberglass, which are selected for their low thermal conductivity and availability in most markets" (EDGE User Guide, Section
7.2: Materials Efficiency Measures). Options A (mineral wool), B (polyurethane), and D (polystyrene) are explicitly mentioned as insulation materials in EDGE. Option C, polypropylene, is not listed as an insulation material, as confirmed by the EDGE Methodology Report: "Polypropylene is a plastic material often used in packaging or pipes, but it is not recognized in EDGE as an insulation material due to its poor thermal resistance compared to standard insulation options like polystyrene or polyurethane" (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). The EDGE software's material database further excludes polypropylene from insulation options, focusing instead on materials with established thermal properties for building envelopes. Thus, polypropylene (Option C) is not an insulation option in EDGE.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
질문 # 19
......
발달한 네트웨크 시대에 인터넷에 검색하면 많은EDGE인증 EDGE-Expert시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고KoreaDumps의EDGE인증 EDGE-Expert시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의EDGE인증 EDGE-Expert 실제시험 문제를 연구하여 만든EDGE인증 EDGE-Expert덤프는 기출문제와 예상문제의 모음 공부자료입니다. KoreaDumps의EDGE인증 EDGE-Expert덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.
EDGE-Expert덤프내용: https://www.koreadumps.com/EDGE-Expert_exam-braindumps.html
2026 KoreaDumps 최신 EDGE-Expert PDF 버전 시험 문제집과 EDGE-Expert 시험 문제 및 답변 무료 공유: https://drive.google.com/open?id=1IQuCMGs6m-bu9qnCswl7WhMKMPisJpaa