P.S. Free & New JN0-481 dumps are available on Google Drive shared by Itexamguide: https://drive.google.com/open?id=18RB6RgobckS-LFWK4RacIdddoUFVnJdd
Many candidates find the Data Center, Specialist (JNCIS-DC) (JN0-481) exam preparation difficult. They often buy expensive study courses to start their Data Center, Specialist (JNCIS-DC) (JN0-481) certification exam preparation. However, spending a huge amount on such resources is difficult for many Juniper JN0-481 Exam applicants. The latest Juniper JN0-481 exam dumps are the right option for you to prepare for the Data Center, Specialist (JNCIS-DC) (JN0-481) certification test at home.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Intent-Based Analytics | 10% | - Analytics features
|
| Topic 2: Apstra Design Phase | 15% | - Configuration and validation
|
| Topic 3: Apstra Build and Deploy Phases | 15% | - Configuration management
|
| Topic 4: Data Center Architectures | 20% | - EVPN-VXLAN
|
| Topic 5: Blueprint Operations | 15% | - Day-to-day management
|
| Topic 6: Data Center Multitenancy | 10% | - Multitenant design
|
| Topic 7: Juniper Apstra Architecture | 15% | - Intent-based networking principles
|
>> Latest JN0-481 Test Labs <<
Once you purchase our windows software of the JN0-481 training engine, you can enjoy unrestricted downloading and installation of our JN0-481 study guide. You need to reserve our installation packages of our JN0-481 learning guide in your flash disks. Then you can go to everywhere without carrying your computers. For it also supports the offline practice. And the best advantage of the software version is that it can simulate the real exam.
NEW QUESTION # 15
In the Juniper Apstra Ul. which two resource types would be created in the Resources menu?
(Choose two.)
Answer: B,D
Explanation:
The Resources menu in the Juniper Apstra UI allows you to create and manage various types of resources that are assigned to different elements of the network.
Resources include the following types:
- IPv4 (including Host IPv4)
- IPv6 (including Host IPv6)
- ASN (autonomous system number)
- VNI (virtual network identifier)
- VLAN (virtual local area network)
Integer (used for pool type VLAN in local pools in Freeform blueprints) Therefore, the correct answer is C and D. ASN pools and IP pools are two types of resources that can be created in the Resources menu. Bridge domain identifier (BDI) and DHCP pools are not applicable in this scenario, because they are not part of the resources types supported by Juniper Apstra.
NEW QUESTION # 16
The same connectivity template is applied to the ge-0/0/6 interface on both borderleaf1 and borderleaf2 nodes. This connectivity template describes the intended configuration of the eBGP session between each of the borderleaf nodes and the external router. You want to ensure that the 172.23.x/24 routes are not installed in the borderleaf nodes' Finance routing table.
Referring to the exhibit, what would you change in Juniper Apstra to accomplish this task?
Answer: D
Explanation:
The exhibit shows the border leaf receiving multiple routes via BGP from the external router, including 172.23.x/24 prefixes, and those routes appearing in the Finance VRF routing table. To stop these routes from being installed in the Finance table, you must change what the border leaf imports from that eBGP session. In Apstra, this control is implemented through a Routing Policy attached to the protocol session described by the connectivity template. By setting the Import Policy to accept default route only, Apstra renders Junos policy so that only 0.0.0.0/0 is imported into the VRF, while the 172.23.x/24 prefixes are rejected and therefore never installed in Finance.inet.0.
Option C is a common trap: the "Expect Default IPv4 Route" setting is an assurance expectation-it generates an expectation/anomaly if the default route is missing, but it does not change device configuration or filtering behavior. Export-policy changes (option D) would only affect what the border leaf advertises outbound to the external router, not what it learns inbound. Aggregation (option A) does not prevent installation of the specific learned /24s; it changes advertisement behavior rather than import filtering. The correct fix is to tighten the import policy on that external eBGP session.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/routing-policies.html
https://www.juniper.net/documentation/us/en/software/apstra6.0/apstra-user-guide/topics/concept/routing-policies.html
https://www.juniper.net/documentation/us/en/software/apstra4.2/apstra-user-guide/topics/concept/connectivity-templates.html
NEW QUESTION # 17
You are creating a template using Juniper Apstr
a. In this scenario, what is a rack-based design compared to a pod-based design?
Answer: D
Explanation:
In Apstra 5.1, templates are used to describe the intended structure of a data center fabric. A rack-based template is used to build the common 3-stage Clos model (spines connected to racks containing leaf/top-of-rack switches and endpoints). In this design, you define the spine logical devices, select one or more rack types, specify rack counts, and define the intended connectivity between spines and racks. This directly models a leaf-spine IP fabric typically used for EVPN-VXLAN in modern data centers.
A pod-based template, by contrast, is explicitly used to build 5-stage Clos networks. In Apstra's terminology, a pod-based template is essentially a "template of templates": it combines one or more rack-based templates (each representing a 3-stage pod) and adds an additional superspine layer to interconnect those pods into a larger, scalable fabric. This is the architectural distinction: rack-based describes the leaf-spine pod, while pod-based describes the multi-pod superspine architecture.
For Junos v24.4 EVPN-VXLAN deployments, the difference matters operationally because 5-stage fabrics introduce additional tiers and scaling considerations (for example, superspine connectivity and expanded ECMP domains). Apstra's template hierarchy ensures consistent intent modeling across both 3-stage and 5-stage topologies without requiring operators to manually redesign the fabric logic each time they scale out.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/templates.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/task/template-create-pod-based.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/5-stage-clos.html
NEW QUESTION # 18
Which two elements are required to build a 3-stage Clos IP fabric Template in Juniper Apstra?
(Choose two.)
Answer: B,D
Explanation:
Building a 3-stage Clos Template in Juniper Apstra requires specifying the number of spine devices for the fabric and selecting one or more Rack Types, which define the leaf switch roles and server-facing connectivity within each rack. These elements together form the logical fabric design before it is instantiated as a blueprint.
NEW QUESTION # 19
You want to assign resources to your blueprint during the deployment phase. In this scenario, which statement is correct?
Answer: C
Explanation:
In Apstra 5.1, "resources" (such as ASNs, IP addressing, and VNIs) are allocated to blueprint elements using resource pools. The blueprint does not require you to manually craft every individual resource value; instead, Apstra's workflow is to have you indicate which pool(s) should be used for the blueprint, and then Apstra automatically pulls and assigns the required values. This automation is fundamental to Apstra's intent-based model: once the blueprint knows which pools to consume, it can deterministically allocate unique values across the fabric and generate consistent Junos configuration for the assigned devices.
Option D best matches this behavior because it reflects the documented mechanism: required resources are automatically pulled from the selected pool(s) and assigned in a fast, bulk transaction. This is what enables repeatable deployments-especially in EVPN-VXLAN data center fabrics-because resource collisions and manual tracking are avoided.
Option A is not the defining prerequisite for resource assignment; device profile and device assignment are important overall build steps, but the correctness of resource assignment is tied to pool selection and availability rather than being strictly gated by those tasks. Option B is incorrect because pools can be created and managed beyond only "global" contexts, and Apstra also supports creating additional pools from within the blueprint when needed. Option C is misleading because resources are governed by pools and allocation, not only by manual creation under a single tab.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/resources.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/freeform-resource-management.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/ref/resource-pools-api.html
NEW QUESTION # 20
......
If you are boring about daily life and want to improve yourself, getting a practical Juniper certification will be a nice choice that will improve your promotion advantages. JN0-481 exam study guide will be valid helper which will help you clear exams 100% for sure. Thousands of candidates successfully pass exams and get certifications you desire under the help of our Itexamguide's JN0-481 Dumps PDF files.
JN0-481 Latest Exam Dumps: https://www.itexamguide.com/JN0-481_braindumps.html
BTW, DOWNLOAD part of Itexamguide JN0-481 dumps from Cloud Storage: https://drive.google.com/open?id=18RB6RgobckS-LFWK4RacIdddoUFVnJdd