Nach den Forschungen in den letzten Jahren sind die Fragen und Antworten zur Fortinet NSE6_FNC_AD-7.6 Zertifizierungsprüfung von ZertSoft den realen Prüfung sehr ähnlich. ZertSoft verspricht, dass Sie zum ersten Mal die Fortinet NSE6_FNC_AD-7.6 (Fortinet NSE 6 - FortiNAC-F 7.6 Administrator) Zertifizierungsprüfung 100% bestehen können.
| Section | Objectives |
|---|---|
| Topic 1: Integration | - Configure and use FortiNAC-F Manager - Explain and configure MDM integration - Integrate with third-party devices using Syslog and SNMP trap input |
| Topic 2: Network Visibility and Monitoring | - Explain and configure device profiling - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Guests and contractors |
| Topic 3: Deployment and Provisioning | - Configure security automation - Configure FortiNAC-F security policies - Configure and monitor high availability (HA) - Configure access control on FortiNAC-F |
| Topic 4: Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
>> NSE6_FNC_AD-7.6 Prüfungen <<
Um unsere ZertSoft eine der zuverlässigen Merken im Gebiet der IT zu werden, bieten wir Sie die vollständigsten und die neusten Prüfungsaufgaben der Fortinet NSE6_FNC_AD-7.6. Mit Hilfe unserer Softwaren bestanden fast alle Käufer Fortinet NSE6_FNC_AD-7.6, die als eine sehr schwere Prüfung gilt, mit Erfolg. Deshalb haben wir Konfidenz, Ihnen unseren Produkten zu empfehlen. Wir können noch garantieren, falls Sie die Fortinet NSE6_FNC_AD-7.6 mit Hilfe unserer Software noch nicht bestehen, geben wir Ihnen die volle Gebühren zurück. Alles in allem hoffen wir, dass Sie sich beruhigt vorbereiten.
27. Frage
Refer to the exhibit. What will happen to the host of a guest user created from this template if the time of connection is 8:00 PM?
Antwort: C
Begründung:
In FortiNAC-F, the Guest & Contractor Template is a configuration object that defines the parameters for accounts created by sponsors or through self-registration. One of the critical security controls within this template is the Login Availability setting. This setting restricts the specific days and times during which a guest or contractor is permitted to authenticate and access the network.
As shown in the exhibit, the "StandardGuest" template has Login Availability set to "Specify Time", with a schedule defined as Mon-Fri, 6:00 AM to 7:00 PM. If a guest user attempts to connect or authenticate at 8:00 PM, which is outside of the permitted window, FortiNAC-F's policy engine will automatically deny the authentication request. When an authentication attempt is denied due to schedule restrictions, the system does not move the host into the "Authenticated" or "Registered" state required for production access. Instead, the host is marked as non- authenticated in the adapter or host view.
28. Frage
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate.
In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?
Antwort: C
Begründung:
To enforce restrictions based on web filter categories for internal engineers, FortiNAC-F must identify and group those users or their devices. A user/host profile defines the specific users or hosts (such as internal engineers) to which the security trigger and associated action will apply, enabling targeted enforcement.
29. Frage
Refer to the exhibits. What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
Antwort: B
Begründung:
In FortiNAC-F, Port Groups are used to apply specific enforcement behaviors to switch ports.
When a port is assigned to an enforcement group, such as Forced Registration or Forced Remediation, FortiNAC-F overrides normal policy logic to force all connected adapters into that specific state. The exhibit shows a port (IF#13) with "Multiple Hosts" connected, which is a common scenario in environments using unmanaged switches or hubs downstream from a managed switch port.
According to the FortiNAC-F Administrator Guide, it is possible for a single port to be a member of multiple port groups. However, when those groups have conflicting enforcement actions--such as one group forcing a registration state and another forcing a remediation state--FortiNAC-F utilizes a ranking system to resolve the conflict. In the FortiNAC-F GUI under Network > Port Management > Port Groups, each group is assigned a rank. The system evaluates these ranks, and only the higher ranked enforcement group is applied to the port. If a port is in both a Forced Registration group and a Forced Remediation group, the group with the numerical priority (rank) will dictate the VLAN and access level assigned to all hosts on that port.
This mechanism ensures consistent behavior across the fabric. If the ranking determines that
"Forced Registration" is higher priority, then even a known host that is failing a compliance scan (which would normally trigger Remediation) will be held in the Registration VLAN because the port-level enforcement takes precedence based on its rank.
"A port can be a member of multiple groups. If more than one group has an enforcement assigned, the group with the highest rank (lowest numerical value) is used to determine the enforcement for the port. When a port is placed in a group with an enforcement, that enforcement is applied to all hosts connected to that port, regardless of the host's current state."
30. Frage
An administrator wants to build a security rule that will quarantine contractors who attempt to access specific websites.
In addition to a user host profile, which Iwo components must the administrator configure to create the security rule? (Choose two.)
Antwort: A,E
Begründung:
In FortiNAC-F, theSecurity Incidentsengine is used to automate responses to security threats reported by external devices. When an administrator wants to enforce a policy, such as quarantining contractors who access restricted websites, they must create aSecurity Rule. A Security Rule acts as the " if-then " logic that correlates incoming security data with the internal host database.
The documentation specifies that a Security Rule consists of three primary configurable components:
User/Host Profile:This identifieswhoorwhatthe rule applies to (in this case, " Contractors " ).
Trigger:This is theeventthat initiates the rule evaluation. In this scenario, the Trigger would be configured to match specific syslog messages or NetFlow data indicating access to prohibited websites. Triggers use filters to match vendor-specific data, such as a " Web Filter " event from a FortiGate.
Action:This defineswhathappens when the Trigger and User/Host Profile are matched. For this scenario, the administrator would select a " Quarantine " action, which instructs FortiNAC-F to move the endpoint to a restricted VLAN or apply a restrictive ACL.
While " Methods " (A) relate to authentication and " Security Strings " (E) are used for specific SNMP or CLI matching, they are not the structural components of a Security Rule in the Security Incidents menu.
" Security Rules are used to perform a specific action based on certain criteria... To configure a Security Rule, navigate toLogs > Security Incidents > Rules. Each rule requires aTriggerto define the event criteria, anActionto define the automated response (such as Quarantine), and aUser/Host Profileto limit the rule to specific groups. " -FortiNAC-F Administration Guide: Security Rules and Incident Management.
31. Frage
Which three communication methods are used by FortiNAC to gather information from and control, infrastructure devices? (Choose three.)
Antwort: A,C,E
32. Frage
......
ZertSoft ist eine Website, mit deren Hilfe Sie die Fortinet NSE6_FNC_AD-7.6 Zertifizierungsprüfung schnell bestehen können. Die Fragenkataloge zur Fortinet NSE6_FNC_AD-7.6 Zertifizierungsprüfung von ZertSoft werden von den Experten zusammengestellt. Wenn Sie sich noch anstrengend um die Fortinet NSE6_FNC_AD-7.6 (Fortinet NSE 6 - FortiNAC-F 7.6 Administrator) Zertifizierungsprüfung bemühen, sollen Sie die Prüfungsunterlagen zur Fortinet NSE6_FNC_AD-7.6 Zertifizierungsprüfung von ZertSoft wählen, die Ihnen große Hilfe bei der Prüfungsvorbereitung leisten.
NSE6_FNC_AD-7.6 PDF Demo: https://www.zertsoft.com/NSE6_FNC_AD-7.6-pruefungsfragen.html