P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ExamsTorrent: https://drive.google.com/open?id=1iHbO08ySkAcOT3IdBwV8iZ0R0jotZrFf
These Fortinet NSE5_FSW_AD-7.6 exam questions are modeled after the NSE5_FSW_AD-7.6 test. They will assist you in learning how to manage your time during the examination. ExamsTorrent enabled all users to regulate time during their Fortinet NSE 5 - FortiSwitch 7.6 Administrator NSE5_FSW_AD-7.6 test. And it can be accomplished via practice, as practice makes perfect. Therefore, you must practice passing the NSE5_FSW_AD-7.6 exam.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> Online NSE5_FSW_AD-7.6 Bootcamps <<
You must ensure that you can pass the exam quickly, so you must choose an authoritative product. Our NSE5_FSW_AD-7.6 exam materials are certified by the authority and have been tested by our tens of thousands of our worthy customers. This is a product that you can definitely use with confidence. And with our NSE5_FSW_AD-7.6 training guide, you can find that the exam is no long hard at all. It is just a piece of cake in front of you. What is more, you can get your NSE5_FSW_AD-7.6 certification easily.
NEW QUESTION # 69
Refer to the exhibit.
FortiSwitch 802.1X port security configuration is shown. A user connects their laptop to the port and attempts to authenticate using 802.1X, but enters the wrong credentials multiple times. What will the result to the device be? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, 802.1X port security allows administrators to define specific actions based on the outcome of an authentication attempt. The configuration exhibit shows a security policy named "Students" with two specialized VLAN assignments enabled: aGuest VLANand anAuthentication fail VLAN.
In FortiSwitchOS 7.6, these two settings serve distinct purposes based on the client's behavior:
* Guest VLAN (Option C):This is used when a connected device doesnothave an 802.1X supplicant (software) or does not respond to EAP (Extensible Authentication Protocol) requests within the specified "Guest authentication delay". In this scenario, the device is moved to the "onboarding" VLAN to allow for basic network access or software downloads.
* Authentication fail VLAN (Option A):This is triggered specifically when a devicedoesattempt to authenticate via 802.1X but the authentication server (RADIUS) returns anAccess-Rejectmessage, typically due toincorrect credentials.
As stated in the scenario, the userattemptsto authenticate but enters thewrong credentials. According to the policy shown in the exhibit, theAuthentication fail VLANis enabled and set to"quarantine.fortilink (quarantine)". Therefore, the FortiSwitch will logically move the port's traffic into the quarantine VLAN, isolating the user from the production network due to the failed login attempt. Option B is incorrect as there is no "shutdown" action configured, and Option D refers to a default state that is overridden by the explicit failure policy.
NEW QUESTION # 70
Refer to the exhibit.
FortiSwitch 802.1X port security configuration is shown. A user connects their laptop to the port and attempts to authenticate using 802.1X, but enters the wrong credentials multiple times. What will the result to the device be? (Choose one answer)
Answer: C
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, 802.1X port security allows administrators to define specific actions based on the outcome of an authentication attempt.
The configuration exhibit shows a security policy named " Students " with two specialized VLAN assignments enabled: aGuest VLANand anAuthentication fail VLAN.
In FortiSwitchOS 7.6, these two settings serve distinct purposes based on the client ' s behavior:
* Guest VLAN (Option C):This is used when a connected device doesnothave an 802.1X supplicant (software) or does not respond to EAP (Extensible Authentication Protocol) requests within the specified " Guest authentication delay " . In this scenario, the device is moved to the " onboarding " VLAN to allow for basic network access or software downloads.
* Authentication fail VLAN (Option A):This is triggered specifically when a devicedoesattempt to authenticate via 802.1X but the authentication server (RADIUS) returns anAccess-Rejectmessage, typically due toincorrect credentials.
As stated in the scenario, the userattemptsto authenticate but enters thewrong credentials. According to the policy shown in the exhibit, theAuthentication fail VLANis enabled and set to " quarantine.fortilink (quarantine) " . Therefore, the FortiSwitch will logically move the port ' s traffic into the quarantine VLAN, isolating the user from the production network due to the failed login attempt. Option B is incorrect as there is no " shutdown " action configured, and Option D refers to a default state that is overridden by the explicit failure policy.
NEW QUESTION # 71
Which QoS mechanism maps packets with specific CoS or DSCP markings to an egress queue?
Answer: D
Explanation:
"Classification: FortiSwitch maps packets with a given CoS or DSCP marking to an egress queue. There are eight egress queues on each port: queues 0 to 7." In Quality of Service (QoS) mechanisms, the process of mapping packets with specific CoS (Class of Service) or DSCP (Differentiated Services Code Point) markings to an egress queue involves two key steps:
classificationandqueuing.
* Classification: This occurs on the ingress side (incoming traffic). The switch examines the packet headers (e.g., CoS or DSCP values) to determine how the traffic should be treated. Based on this classification, the switch assigns the packet to a specific priority level or queue.
* Queuing: Once the packet is classified, it is mapped to an egress queue based on its priority level. The egress queues are used to manage how traffic is transmitted out of the switch.
* Option A (Queuing for egress traffic)refers to managing how packets leave the switch, but it does not involve the initial mapping of CoS/DSCP values to a queue.
* Option C (Rate limiting for egress traffic)is about controlling the rate of outgoing traffic, which is unrelated to CoS/DSCP mapping.
* Option D (Marking for ingress traffic)involves modifying the CoS or DSCP values of packets as they enter the switch, but it does not map them to an egress queue.
Thus,classification for ingress trafficis the mechanism that identifies and maps packets with specific CoS or DSCP markings to an appropriate egress queue.
NEW QUESTION # 72
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
Answer: C
Explanation:
When FortiGate exports configuration settings to a managed FortiSwitch stack with sampling mode set to " perimeter is true, " the behavior is:
* B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.This setting ensures that all incoming traffic on normal operational ports is sampled for monitoring and analysis purposes, but it excludes the inter-chassis link (ICL) and inter-switch link (ISL) interfaces from sampling. These exclusions are typically made to prevent the duplication of sampled data and to reduce unnecessary load on the monitoring system, as these links often carry traffic already monitored at other points.
Options A and D are incorrect because they either generalize the sampling across all interfaces without exceptions or incorrectly specify egress sampling on management interfaces. Option C is also incorrect as FortiGate can modify existing sampling settings to fit the perimeter-based configuration requirement.
NEW QUESTION # 73
Which packet capture method allows FortiSwitch to capture traffic on trunks and management interfaces?
Answer: D
Explanation:
FortiSwitch supports packet capture through various methods, but the Sniffer profile is specifically capable of capturing traffic on both trunks and management interfaces.Here's why:
* Sniffer Profile (B):
* Versatile Capture:The sniffer profile in FortiSwitch is designed to capture traffic across different types of interfaces, including trunks (where multiple VLANs are present) and management interfaces (used for controlling and monitoring the switch).
* Configuration Flexibility:You can configure sniffer profiles to target specific traffic, offering flexibility in monitoring and troubleshooting network issues on both data and management planes.
* Other Options:
* SPAN (A)is used mainly for mirroring traffic to another port for analysis but is typically limited in its ability to capture management interface traffic.
* sFlow (C)andTCP dump (D)are useful tools but do not specifically align with the capability to universally capture traffic across trunks and management interfaces in the context described.
References:For further details on configuring and utilizing sniffer profiles on FortiSwitch, refer to the FortiSwitch management documentation:Fortinet Product Documentation
NEW QUESTION # 74
......
ExamsTorrent is a website that provide the counseling courses for IT professionals to participate in Fortinet certification NSE5_FSW_AD-7.6 exam and help them get the Fortinet NSE5_FSW_AD-7.6 certification. The courses of ExamsTorrent is developed by experienced experts' extensive experience and expertise and the quality is very good and have a very fast update rate. Besides, exercises we provide are very close to the real exam questions, almost the same. When you select ExamsTorrent, you are sure to 100% pass your first time to participate in the difficult and critical Fortinet Certification NSE5_FSW_AD-7.6 Exam.
Valid NSE5_FSW_AD-7.6 Real Test: https://www.examstorrent.com/NSE5_FSW_AD-7.6-exam-dumps-torrent.html
BTW, DOWNLOAD part of ExamsTorrent NSE5_FSW_AD-7.6 dumps from Cloud Storage: https://drive.google.com/open?id=1iHbO08ySkAcOT3IdBwV8iZ0R0jotZrFf