Exam 350-401 Syllabus - 350-401 Free Vce Dumps

BTW, DOWNLOAD part of DumpsMaterials 350-401 dumps from Cloud Storage: https://drive.google.com/open?id=1lrxZ-WIFVjkYj0oTfeiT0N_G7lcn6fha

When preparing to take the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) (350-401) exam dumps, knowing where to start can be a little frustrating, but with Cisco 350-401 practice questions, you will feel fully prepared. Using our Cisco 350-401 practice test DumpsMaterials, you can prepare for the increased difficulty on 350-401 Exam day. Plus, we have various question types and difficulty levels so that you can tailor your Cisco 350-401 exam dumps preparation to your requirements.

Cisco 350-401 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Automation and Programmability15%- Cisco DNA Center
  • 1. Device discovery and provisioning
  • 2. Intent-based networking concepts
  • 3. DNA Center APIs
- Configuration Management
  • 1. Configuration backup and restore
  • 2. DHCP, DNS automation
  • 3. Python EEM (Embedded Event Manager)
- Automation Concepts
  • 1. REST API basics
  • 2. JSON, XML data formats
  • 3. Python programming (scripts, modules)
  • 4. Ansible, Puppet, Chef basics
Topic 2: IP Connectivity20%- Switching
  • 1. SPAN, RSPAN, ERSPAN
  • 2. STP (802.1D, RPVST+, MSTP)
  • 3. Layer 2 switching fundamentals
  • 4. VLAN, VTP, DTP
  • 5. EtherChannel (LACP, PAgP)
- Path Control
  • 1. IP SLA tracking
  • 2. PBR (Policy-Based Routing)
  • 3. Fallback routing
- Layer 3 Routing
  • 1. Route maps, prefix lists, ACLs
  • 2. OSPF (multi-area, stub, NSSA, virtual links)
  • 3. BGP (iBGP, eBGP, route maps, prefix lists)
  • 4. Route redistribution
  • 5. EIGRP (feasible successors, variance)
Topic 3: Architecture15%- Network Programmability
  • 1. SDN architectures (APIC-EM, DNA Center)
  • 2. NETCONF, YANG
  • 3. REST APIs
- Virtualization
  • 1. VRF-Lite
  • 2. VXLAN (Virtual Extensible LAN)
  • 3. LISP, L2TP, PPPoE
  • 4. VRF (Virtual Routing and Forwarding)
- Network Architecture
  • 1. Wireless architecture (controller-based, fabric, SD-Access)
  • 2. Campus LAN design (two-tier, three-tier)
  • 3. Data center architecture
  • 4. WAN architecture (VPN, DMVPN, SD-WAN)
  • 5. Design principles (hierarchy, modularity, resilience)
Topic 4: IP Services15%- Additional Services
  • 1. SNMP monitoring
  • 2. HTTP, HTTPS
  • 3. FTP, TFTP
  • 4. AAA (local, TACACS+, RADIUS)
  • 5. NTP (time synchronization)
- Quality of Service (QoS)
  • 1. Classification and marking
  • 2. QoS models (IntServ, DiffServ)
  • 3. Queuing (LLQ, CBWFQ)
  • 4. WRED, DSCP
  • 5. Shaping and policing
- NAT and DHCP
  • 1. DHCP server and relay
  • 2. DHCP Snooping
  • 3. Static NAT, Dynamic NAT, PAT
Topic 5: Network Assurance15%- Network Monitoring
  • 1. Syslog
  • 2. SNMP v2c, v3
  • 3. SPAN, RSPAN, ERSPAN
  • 4. IP SLA
  • 5. NetFlow, Flexible NetFlow
- Debugging and Troubleshooting
  • 1. Debug commands
  • 2. VLAN, STP, EtherChannel
  • 3. Layer 2/3 troubleshooting
  • 4. Routing protocol verification
- Diagnostic Methodology
  • 1. 6-step troubleshooting methodology
  • 2. Root cause analysis
Topic 6: Security Foundations20%- Advanced Security
  • 1. IPv6 First-Hop Security (RA Guard, DHCPv6 Guard)
  • 2. uRPF (Unicast Reverse Path Forwarding)
  • 3. CAPWAP, AP join process
  • 4. WPA2, WPA3 (Wireless Security)
- Network Security
  • 1. AAA (Authentication, Authorization, Accounting)
  • 2. 802.1X (Port-Based NAC)
  • 3. IPv6 ACLs
  • 4. Access Control Lists (ACLs)
  • 5. MACsec, IPsec
- Device Security
  • 1. Layer 2 security (Port Security, DHCP Snooping, DAI)
  • 2. Control plane protection
  • 3. Management plane security
  • 4. Switch security hardening

>> Exam 350-401 Syllabus <<

350-401 Free Vce Dumps | Latest Study 350-401 Questions

The three versions of our 350-401 training materials each have its own advantage, now I would like to introduce the advantage of the software version for your reference. On the one hand, the software version can simulate the real 350-401 examination for all of the users in windows operation system. By actually simulating the real test environment, you will have the opportunity to learn and correct your weakness in the course of study. So that you can get your best pass percentage by our 350-401 Exam Questions.

Cisco Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Sample Questions (Q106-Q111):

NEW QUESTION # 106
The login method is configured on the VTY lines of a router with these parameters.
The first method for authentication is TACACS
If TACACS is unavailable, login is allowed without any provided credentials Which configuration accomplishes this task?

Answer: C

Explanation:
Reference:
According to the requirements (first use TACACS+, then allow login with no authentication), we have to use "aaa authentication login ... group tacacs+ none" for AAA command.
The next thing to check is the if the "aaa authentication login default" or "aaa authentication login list-name" is used. The 'default' keyword means we want to apply for all login connections (such as tty, vty, console and aux). If we use this keyword, we don't need to configure anything else under tty, vty and aux lines. If we don't use this keyword then we have to specify which line(s) we want to apply the authentication feature.
From above information, we can find out answer 'R1#sh run | include aaa aaa new-model aaa authentication login default group tacacs+ none aaa session-id common R1#sh run | section vty line vty 0 4 password 7 0202039485748 If you want to learn more about AAA configuration, please read our AAA TACACS+ and RADIUS Tutorial - Part 2.
For your information, answer 'R1#sh run | include aaa
aaa new-model
aaa authentication login telnet group tacacs+ none
aaa session-id common
R1#sh run | section vty
line vty 0 4
R1#sh run | include username
R1#' would be correct if we add the following command under vty line ("line vty 0 4"): "login authentication telnet" ("telnet" is the name of the AAA list above)


NEW QUESTION # 107
Refer to the exhibit. Which statement about this IP SLA is true?

Answer: C


NEW QUESTION # 108
Refer to the exhibit.

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on GO/1 on SW2, but the port remains blocked. Which command should be entered on the ports that are connected to Link2 to resolve the issue?

Answer: D

Explanation:
Explanation
SW1 needs to block one of its ports to SW2 to avoid a bridging loop between the two switches.
Unfortunately, it blocked the fiber port Link2. But how does SW2 select its blocked port? Well, the answer is based on the BPDUs it receives from SW1. answer 'Enter spanning-tree port-priority 32 on SW1' BPDU is superior than another if it has:
1. answer 'Enter spanning-tree port-priority 32 on SW1' lower Root Bridge ID
2. answer 'Enter spanning-tree port-priority 32 on SW1' lower path cost to the Root
3. answer 'Enter spanning-tree port-priority 32 on SW1' lower Sending Bridge ID
4. answer 'Enter spanning-tree port-priority 32 on SW1' lower Sending Port ID These four parameters are examined in order. In this specific case, all the BPDUs sent by SW1 have the same Root Bridge ID, the same path cost to the Root and the same Sending Bridge ID.
The only parameter left to select the best one is the Sending Port ID (Port ID = port priority + port index). And the port index of Gi0/0 is lower than the port index of Gi0/1 so Link 1 has been chosen as the primary link.
Therefore we must change the port priority to change the primary link. The lower numerical value of port priority, the higher priority that port has. In other words, we must change the port-priority on Gi0/1 of SW1 (not on Gi0/1 of SW2) to a lower value than that of Gi0/0.


NEW QUESTION # 109
What is the role of the RP in PIM sparse mode?

Answer: B


NEW QUESTION # 110
Refer to the exhibit.

A port channel is configured between SW2 and SW3. SW2 is not running a Cisco operating system. When all physical connections are mode, the port channel does not establish. Based on the configuration excerpt of SW3, what is the cause of the problem?

Answer: D


NEW QUESTION # 111
......

You don't need to worry about wasting your precious time but failing to get the 350-401 certification. Many people have used our study materials and the pass rate of the exam is 99%. This means as long as you learn with our study materials, you will pass the 350-401 exam without doubt. If any incident happens and you don't pass the 350-401 Exam, we will give you a full refund. Our sincerity stems from the good quality of our products. We will give you one year's free update of the exam study materials. Now just make up your mind and get your 350-401 exam torrent!

350-401 Free Vce Dumps: https://www.dumpsmaterials.com/350-401-real-torrent.html

2026 Latest DumpsMaterials 350-401 PDF Dumps and 350-401 Exam Engine Free Share: https://drive.google.com/open?id=1lrxZ-WIFVjkYj0oTfeiT0N_G7lcn6fha