私たちISQIが提供するCTAL-TAE_V2クイズトレントは、理論と実践の最新の開発に基づいた深い経験を持つ専門家によってコンパイルされているため、非常に価値があります。 製品を購入する前に、まず製品を試してください。 CertJukenのCTAL-TAE_V2試験の合格に役立つだけでなく、時間とエネルギーを節約できるため、CTAL-TAE_V2試験準備を購入する価値があります。 お客様の満足が私たちのサービスの目的です。CTAL-TAE_V2クイズトレントを簡単にISTQB Certified Tester Advanced Level - Test Automation Engineering CTAL-TAE (Syllabus v2.0)購入してください。
| Section | Weight | Objectives |
|---|---|---|
| Execution and Implementation of Test Automation | 35% | - Implementing Test Automation Solutions - Building Robust Automated Test Suites - Logging and Reporting Strategies - Verifying Test Automation Solutions - Designing Test Automation Solutions - Developing Test Automation Solutions |
| Test Automation Validation | 15% | - Test Automation Assessment Metrics - Test Automation Verification - Root Cause Analysis |
| Preparation for Test Automation | 15% | - Rollout and Deployment Considerations - SUT Analysis for Test Automation - Test Automation Architecture Design - Test Automation Tool Evaluation and Selection - Design for Testability and Automation |
| Transitioning from Manual to Automated Testing | 15% | - Criteria for Manual vs. Automated Testing - Maintaining Automation Consistency - Automation Migration Strategies |
| Test Automation Strategy and Roadmap | 15% | - Test Automation Planning - Test Automation Maintenance - Test Automation Integration with CI/CD - Test Automation Governance |
| Introduction and Objectives for Test Automation | 5% | - Purpose of Test Automation - Risks and Benefits of Test Automation - Success Factors for Test Automation |
ISQIのCTAL-TAE_V2認定試験を受けてCTAL-TAE_V2認証資格を取得したいですか。CertJukenはあなたの成功を保証することができます。もちろん、試験の準備をするときに試験に関連する知識を学ぶのは必要です。なお大切なのは、自分に相応しい効率的なツールを選択することです。CertJukenのCTAL-TAE_V2問題集はあなたに合う最善の勉強法です。この高品質の問題集は信じられないほどの結果を見せることができます。自分が試験に合格できない心配があれば、はやくCertJukenのウェブサイトをクリックしてもっと多くの情報を読んでください。
質問 # 11
Which of the following practices can be used to specify the active (i.e., actually available) features for each release of the SUT and determine the corresponding automated tests that must be executed for a given release?
正解：B
解説：
TAE materials commonly describe feature toggles (feature flags) as a mechanism to control which features are active in a given release or deployment without necessarily changing the codebase structure for each variant. Because toggles determine what functionality is actually enabled, they provide a practical basis for selecting which automated tests should run for that release configuration. When a feature is disabled via a toggle, executing tests for it can create false failures or wasted effort; when enabled, the corresponding tests become relevant as release evidence. Feature-driven development is a product/development planning approach and does not, by itself, provide an operational mechanism to declare what is active at runtime.
Feature files (often associated with BDD) specify behavior scenarios, but they do not inherently indicate whether a feature is active in a particular release unless explicitly tied to toggles or release configuration.
TDD focuses on coding practices at the unit level and similarly does not specify release-time feature availability. Feature toggles directly express "active vs. inactive" functionality and can be used to drive risk- based and relevance-based test execution decisions, matching the requirement precisely.
質問 # 12
Your company is about to start a project to replace an old sales and merchandising system with a new version that will be based on modern platforms. The main requirements for the system are:
1. Loading sales data, sent electronically from the stores each evening, into a central database.
2. Producing sales reports for the merchandisers, whose job is to manage stock levels in stores.
3. Producing forecast reports, used to predict future demand for each product, based on a combination of sales history and forecasting parameters. The parameters will be entered by the merchandisers into a browser-based front end and the reports will be produced overnight. The users will be able to retrieve the reports, on screen or in print, via an interactive feature.
Requirements 1 and 2 were already met by the old system and will be rewritten in the new system with some minor functional changes. The sales data will, as before, be loaded in an overnight batch run. There have been problems with the old system at peak periods when this run has taken longer than scheduled, so that dependent jobs could not finish before the start of the next working day. The Data Centre manager requires that the new system's overnight batch runs take 10% less time than the old one, including the new reports, to allow time for all jobs to complete.
Requirement 3 is new. The functionality provided by the UI will be simple and the Sales & Merchandising manager requires that it be easy to use.
The data for testing the reports will be extracted from the old system in production and will be anonymized before use.
The system will be developed using an Agile lifecycle with iterations of fixed length. This will be the first full deployment of this methodology, which has just completed a successful pilot. It is a relatively simple development and is expected to be completed in three releases, each taking approximately 2 months.
You are an experienced TAE and have been recruited to implement test automation on this project and have started to evaluate candidate tools to automate functional and some non-functional testing. It is already clear that no single tool will meet all requirements, and that the developers' existing Integrated Development Environment will meet the automation needs of their testing. The TAS will need to support CI/CD.
When reviewing your tool comparison table, what two tool capabilities will be MOST beneficial for this project?
i) The ability to support multiple and configurable test environments.
ii) The ability to manage test data in a way that supports version control of the data sets.
iii) The ability to be compatible with other tools that are likely to be used on the project.
iv) The ability to expand the overall test architecture and to be scalable and modifiable.
v) The ability for non-technical users to enter requests for customizable reports.
正解：B
解説：
The scenario explicitly states that no single tool will satisfy all automation requirements and that the TAS must support CI/CD. Consequently, interoperability with other project tools is especially important. The syllabus identifies integration with CI/CD, test management, reporting, task-tracking, and other tools as a major tool-evaluation criterion. The project is also replacing a legacy system with modern platforms and will evolve across several Agile releases, making scalability and modifiability of the overall test architecture highly valuable. ISTQB specifically identifies the ability to expand the architecture and assess scalability, maintainability, modifiability, compatibility, and reliability when comparing automation tools. Although configurable environments and test-data management are valid considerations, the scenario's strongest distinguishing requirements are multi-tool integration and an architecture capable of evolving with the project.
Therefore, iii and iv are correct.
(https://www.istqb.org/wp-content/uploads/2024/11/ISTQB_CTAL-TAE_Syllabus_v2.0.pdf)
質問 # 13
(Which of the following statements refers to a typical advantage of test automation?)
正解：C
解説：
In the ISTQB Test Automation Engineer (TAE) body of knowledge, a core, typical advantage of test automation is faster feedback through efficient execution, especially when tests are implemented at lower levels (e.g., API/service) rather than through the UI. UI tests inherently traverse more layers (browser, rendering, client-side code, network timing, and often multiple back-end calls), so they tend to be slower and more brittle. API-level tests bypass most UI-related overhead and interact closer to business logic/services, reducing execution time and improving reliability. Option A is incorrect because many results (e.g., visual aesthetics, subjective usability, tone, or "looks right") are not reliably machine-interpretable without specialized approaches and still often require human judgment. Option C may be possible in some contexts, but "AI redundancy identification" is not a typical, foundational advantage emphasized as a standard automation benefit. Option D is misleading: early defect detection is mainly achieved by earlier and more frequent execution (e.g., CI) and shifting tests left, not merely because a single automated run is shorter than manual execution. Therefore, the most typical advantage presented is that API automation generally runs faster than UI automation.
質問 # 14
What is considered to be an ADVANTAGE of test automation?
正解：D
解説：
One explicit advantage listed in CTAL-TAE is the ability to create and execute tests that cannot practically be performed manually. Examples include real-time response testing, remote testing, and parallel execution. This directly supports option D. Automation is not automatically cheaper or faster to develop and maintain than manual testing; substantial initial implementation and ongoing maintenance costs may be required.
Automated tests also do not inherently discover more defects, because defect detection depends on test design, coverage, risk focus, and suitable oracles rather than simply whether execution is automated.
Likewise, automated tests may actually require significant maintenance when the SUT changes, particularly when automation is tightly coupled to unstable interfaces. The genuine advantage is that automation enables repeatable, high-volume, time-sensitive, concurrent, or technically impractical test execution beyond what human manual execution can reasonably achieve.
(https://istqb.org/wp-content/uploads/2024/11/ISTQB_CTAL-TAE_Syllabus_v2.0.pdf)
質問 # 15
Which one of the following answers does NOT refer to an example of configuration item(s) that should be specified in development pipelines to identify a test environment (and its specific test data) associated with a web app under test on which to execute automated tests?
正解：C
解説：
In TAE guidance, pipeline configuration items used to identify a specific test environment (and its associated test data) are those that uniquely define where the SUT is running and how automation connects to the deployed system and its dependent services and data stores. That typically includes the base URL of the deployed web application, endpoints/URLs for backend services used in that environment, and connection details to environment-specific databases (or references to secrets/credentials that enable those connections).
These items allow the same automated tests to be executed against different environments by switching configuration rather than changing test code. By contrast, "the number and type of automated tests to execute" is a test selection/execution configuration decision (what to run), not an environment identification configuration (where to run). You can run different subsets of tests in the same environment without changing the environment identity. TAE distinguishes environment configuration (addresses, endpoints, credentials, data sources) from orchestration configuration (suite selection, tags, parallelism). Therefore, option A does not describe a configuration item that identifies the test environment and its specific test data.
質問 # 16
......
CertJuken はISQI業界に認定試験大綱の主要なサプライヤーとして、CTAL-TAE_V2専門家は一緻して品質の高い商品を開発し続けています。
CTAL-TAE_V2日本語学習内容: https://www.certjuken.com/CTAL-TAE_V2-exam.html