In this information-dominated society, boosting plenty stocks of knowledge and being competent in some certain area can establish yourself in society and help you get a high social status. Passing H19-404_V1.0 certification can help you realize these goals and find a good job with high income. If you buy our H19-404_V1.0 practice test you can pass the exam successfully and easily. The purchase procedures are safe and we protect our clientโs privacy. We provide 24-hours online customer service and free update within one year. If you fail in the exam, we will refund you immediately. All in all, there are many advantages of our H19-404_V1.0 Training Materials.
| Section | Objectives |
|---|---|
| Campus SD-WAN Planning and Design | - SD-WAN Solutions
|
| Huawei Campus Network Products and Solutions | - Campus Network Product Portfolio
|
| Campus Network Solution Architecture and Design | - Enterprise Campus Network Architecture
|
| Campus Network Security Design | - Security Planning
|
| Industry Scenario Solution Design | - Industry-Oriented Campus Solutions
|
| Campus WLAN Planning and Design | - WLAN Technologies
|
| CloudCampus and Intelligent Campus Solutions | - CloudCampus Architecture
|
| Pre-sales Methodology and Solution Presentation | - Pre-sales Skills
|
>> New H19-404_V1.0 Exam Papers <<
With the principles of customers first and service first, we will offer you the most considerate service. Free update for 365 days, and if you do have some questions about the H19-404_V1.0 exam braindumps , you can ask the live chat service stuff for help or you can contact us by email, we will answer your questions immediately, and if you have any good suggestion of the H19-404_V1.0 Exam Braindumps, we will be glad to accept. The H19-404_V1.0 exam dumps is professional and helpful, it will benefit you a lot.
NEW QUESTION # 13
On a large campus network, inter-WAC roaming should be avoided as much as possible to ensure the roaming experience.
Answer: B
Explanation:
The statement is true as a WLAN design recommendation. Inter-WAC roaming is supported, but it introduces more control-plane interaction and forwarding complexity than intra-WAC roaming. The Home WAC and Foreign WAC must belong to the same mobility group, synchronize station and AP information, and establish an inter-WAC CAPWAP tunnel for control information and, in some scenarios, service forwarding.
Additional synchronization, tunnel processing, route handling, and failure dependencies can increase roaming delay and complicate troubleshooting. This is especially relevant for delay-sensitive applications such as voice, video, automated guided vehicles, and real-time production systems. A better design places APs between which users frequently move under the same WAC wherever controller capacity and physical topology permit.
Avoiding inter-WAC roaming does not mean disabling the function entirely. Large campuses may require multiple WACs for scale, redundancy, or geographic distribution. Mobility groups should still be configured for unavoidable cross-controller movement. However, buildings, floors, and continuous roaming areas should be assigned carefully so that normal roaming remains intra-WAC. Therefore, the recommendation in the statement is correct, and the answer is True.
NEW QUESTION # 14
Huawei provides an innovative technology that can maintain smooth video when traffic packet loss between enterprise branches reaches up to 20%. Which technology provides this capability?
Answer: C
Explanation:
A-FEC, or Adaptive Forward Error Correction, is the correct technology. It protects delay-sensitive traffic by adding calculated redundant packets to the original packet stream. If some original packets are lost during WAN transmission, the receiving edge device can reconstruct them using the surviving original and redundant packets rather than waiting for end-to-end retransmission.
The key distinction between ordinary FEC and A-FEC is adaptation. With A-FEC, the receiving device reports real-time packet-loss and continuous-loss information to the transmitting device through FEC acknowledgement messages. The transmitting edge then dynamically increases or decreases the redundancy ratio according to actual network conditions. This provides stronger recovery during severe loss while avoiding unnecessary bandwidth overhead when link quality improves. Huawei describes this feedback- controlled adjustment as a mechanism that can alleviate or eliminate the impact of packet loss.
IFIT and IPCA are primarily measurement and service-quality analysis technologies; they do not reconstruct lost video packets. Fixed FEC does not adapt its redundancy level as effectively to changing loss conditions.
Therefore, the technology intended for smooth video under packet loss of up to 20% is A-FEC.
NEW QUESTION # 15
Which of the following technologies is used for wireless attack detection?
Answer: B
Explanation:
WIPS is the correct technology because it provides wireless intrusion prevention capabilities, including detecting and containing rogue access points, rogue stations, ad hoc devices, spoofing attempts, flood attacks, and other malicious activity on the radio interface. Huawei's security-design material groups WIDS and WIPS with wireless attack detection and rogue-device containment. It recommends attack detection in public areas and primary or secondary education environments with high security requirements.
WIDS primarily detects and reports suspicious behavior, while WIPS adds active prevention or containment actions according to the configured policy. The other options serve different purposes. Mesh is a wireless networking architecture used to provide backhaul connectivity or extend coverage between APs; it is not an attack-detection mechanism. Spectrum analysis identifies non-Wi-Fi interference sources and evaluates radio- frequency utilization, but does not provide complete security attack detection and containment. Protected Management Frames protects selected 802.11 management frames against forgery, deauthentication, and disassociation attacks, but it is a protection mechanism rather than the comprehensive detection system requested. Therefore, WIPS is the correct answer.
NEW QUESTION # 16
In hierarchical networking, which of the following devices is used for communication between different areas?
Answer: C
Explanation:
A border device, or more precisely a device at a border site, provides communication between different areas in a hierarchical SD-WAN topology. The hierarchical model divides a large WAN into multiple areas. Each area can independently use a hub-spoke or full-mesh topology, while selected border sites connect the local area to a centralized backbone area.
When a non-border site receives a route originating in another area, the route's next-hop site ID is changed to the border site in its own area. The local border device then forwards traffic toward the border site in the destination area or toward an interconnected hub site. Ordinary edge devices provide connectivity for their own sites but do not automatically perform cross-area transit.
Huawei describes border sites as members of both the level-2 area network and the level-1 backbone network.
These sites collectively implement interconnection between areas. Huawei further explains that inter-area routes point to border sites and recommends two border sites operating in active/standby mode for reliability.
Therefore, the correct answer is B.
NEW QUESTION # 17
Which of the following statements is true about MACsec?
Answer: D
Explanation:
Hardware-based encryption is the unambiguously correct statement. MACsec protects Ethernet frames at Layer 2 using AES-GCM-based authenticated encryption. On enterprise switches and routers, the encryption and integrity operations are commonly implemented in forwarding ASICs or dedicated hardware so that frames can be protected at high throughput with low latency.
Option A is incorrect because complex manual configuration is not an inherent requirement. MACsec can use manually configured connectivity-association keys, but IEEE 802.1X MACsec Key Agreement can automate peer authentication, secure-channel establishment, key distribution, and rekeying. The operational complexity therefore depends on the deployment model and management platform.
Option C is also inaccurate. MACsec is media-independent, meaning it can operate over supported copper or fiber Ethernet; however, it does not eliminate the requirement for appropriate Layer 2 connectivity between participating MACsec entities. Standard hop-by-hop MACsec protects Ethernet links or LAN connectivity between peers and is not a general Layer 3 tunneling mechanism.
MACsec supplies Layer 2 confidentiality, integrity, origin authentication, and replay protection. Its encryption can be performed directly in network-device hardware, enabling substantially better forwarding performance than software-only encryption implementations.
NEW QUESTION # 18
......
A lot of office workers in their own professional development encounter bottleneck and begin to choose to continue to get the test H19-404_V1.0 certification to the school for further study. We all understand the importance of education, and it is essential to get the H19-404_V1.0 certification. Learn the importance of self-evident, and the stand or fall of learning outcome measure, in reality of hiring process, for the most part through your grades of high and low, as well as you acquire the qualification of how much remains. Therefore, the H19-404_V1.0 practice materials can give users more advantages in the future job search, so that users can stand out in the fierce competition and become the best.
Reliable H19-404_V1.0 Test Prep: https://www.testkingit.com/Huawei/latest-H19-404_V1.0-exam-dumps.html