P.S. Free & New 220-1201 dumps are available on Google Drive shared by Pass4training: https://drive.google.com/open?id=1UcMtk78niYdfY6yw3yzW_P2kbxr-6Lhd
The 220-1201 learning materials are of high quality, mainly reflected in the adoption rate. As for our 220-1201 exam question, we guaranteed a higher passing rate than that of other agency. More importantly, we will promptly update our 220-1201 quiz torrent based on the progress of the letter and send it to you. 99% of people who use our 220-1201 Quiz torrent has passed the exam and successfully obtained their certificates, which undoubtedly show that the passing rate of our 220-1201 exam question is 99%. So our 220-1201 study guide is a good choice for you.
| Section | Weight | Objectives |
|---|---|---|
| Hardware | 25% | - PC hardware components
|
| Mobile Devices | 15% | - Mobile device hardware and components
|
| Virtualization and Cloud Computing | 11% | - Cloud computing concepts
|
| Hardware and Network Troubleshooting | 29% | - Troubleshooting methodology
|
| Networking | 20% | - Network fundamentals
|
>> 220-1201 Reliable Learning Materials <<
You are desired to know where to get free and valid resource for the study of 220-1201 actual test. 220-1201 free demo can give you some help. You can free download the 220-1201 free pdf demo to have a try. The questions of the free demo are part of the CompTIA 220-1201 Complete Exam Dumps. You can have a preview of the 220-1201 practice pdf. If you think it is valid and useful, you can choose the complete one for further study. I think with the assist of 220-1201 updated dumps, you will succeed with ease.
NEW QUESTION # 282
A technician adds the NTP service to a server and configures all network computers to that service. Which of the following is the technician most likely trying to achieve?
Answer: B
Explanation:
NTP is used to synchronize the system clocks of devices across a network, ensuring consistent and accurate time on all systems.
NEW QUESTION # 283
After a data breach, an affected file server is reimaged and must have the data restored. The server array is configured as RAID 6. The technician restoring the data notices that the data transfer is sluggish and restarts the server. After restarting the server, the technician continues the restore process and sees one red LED in the drive array. Which of the following should the technician do next to remediate the issue?
Answer: B
Explanation:
The correct answer is D. Replace the failed drive.
RAID 6 is a redundant array of independent disks that can tolerate up to two drive failures while still maintaining data integrity. According to CompTIA A+ Core 1 (220-1201) objectives, a red LED on a drive in a RAID array indicates that the drive has failed or is in a critical state.
* Next Step: In RAID 6, a single failed drive should be replaced immediately to prevent additional failures and maintain redundancy. The array can continue to operate in a degraded state, but performance may be slow during rebuilds. Replacing the failed drive allows the RAID controller to rebuild data onto the new drive, restoring full redundancy.
Why the other options are incorrect:
* A. Reconfigure the RAID array: This would erase existing data; unnecessary if only one drive failed.
* B. Run a S.M.A.R.T. test: While useful for diagnosing drive health, the red LED already indicates failure, so immediate replacement is required.
* C. Reinstall the controller drivers: This does not address a physically failed drive and would not fix the degraded RAID array.
References:
CompTIA A+ Core 1 (220-1201) Exam Objectives - Hardware: "Given a scenario, troubleshoot storage and RAID issues including failed drives and degraded arrays." Mike Meyers' CompTIA A+ Certification Guide, 13th Edition, Chapter on Storage Devices and RAID.
NEW QUESTION # 284
A technician receives a S.M.A.R.T. error on a PC. When the technician presses the Esc key, the PC continues to turn on without any further issues.
Which of the following should the technician do next?
Answer: A
Explanation:
S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology):
S.M.A.R.T. is a monitoring system integrated into modern HDDs and SSDs that detects and reports on various indicators of drive health and reliability.
A S.M.A.R.T. error indicates that the drive is showing signs of impending failure, even if the PC continues to boot and work normally for the time being.
Next Steps:
The appropriate action is to replace the hard drive (HDD) because a S.M.A.R.T. error is an early warning of possible hardware failure. Ignoring the warning could result in data loss if the drive fails completely. The technician should also back up the user's data immediately to avoid losing
NEW QUESTION # 285
A user on the edge of a building reports slow Wi-Fi and intermittent drops. Which action will solve the issue?
Answer: B
Explanation:
Wireless coverage issues at the physical edges of a building are typically caused by weak RF signal strength.
The CompTIA A+ study material says the best solution is to add additional wireless access points (APs) or implement a mesh system to extend coverage and eliminate dead zones.
Enabling 5GHz often worsens the issue because 5GHz has shorter range. Wi-Fi 6 NIC upgrades improve performance but do not increase signal reach. Flushing DNS does not affect wireless coverage.
Installing more APs ensures stronger coverage, better signal-to-noise ratio, and stable connectivity aligning with CompTIA's wireless troubleshooting best practices.
NEW QUESTION # 286
A human resources manager printed a sensitive termination document and forgot to retrieve it from the printer. Which of the following prevents this situation?
Answer: A
Explanation:
Secure badging-often used with "pull printing" or "secure print release"-requires users to authenticate at the printer before documents are printed. CompTIA A+ highlights this feature as critical for protecting sensitive data in corporate environments. With badge-based printing, jobs stay in a secure print queue until the authorized user physically scans their badge.
This prevents confidential documents, like HR termination notices, from sitting unattended in the output tray. It also reduces print waste and ensures accountability for printed materials.
Duplex printing (B) simply prints double-sided pages. Printer sharing (C) allows multiple users to use a printer but does not provide security. Wireless encryption (D) protects network traffic but does not address abandoned print jobs.
Therefore, badging / secure print release is the correct protective measure.
NEW QUESTION # 287
......
Most people are nervous and anxious to take part in the 220-1201 exam for the first time. Then it is easy for them to make mistakes. So it is important to get familiar with the real test environment. Also, the real test environment of the 220-1201 Study Materials can help you control time. After all, you must submit your practice in limited time in 220-1201 practice materials. Trust in our 220-1201 training guide, and you will get success for sure.
Well 220-1201 Prep: https://www.pass4training.com/220-1201-pass-exam-training.html
P.S. Free & New 220-1201 dumps are available on Google Drive shared by Pass4training: https://drive.google.com/open?id=1UcMtk78niYdfY6yw3yzW_P2kbxr-6Lhd