P.S. Free & New JN0-364 dumps are available on Google Drive shared by Pass4guide: https://drive.google.com/open?id=1pfIy4O6lXHl-KSy6o5d2L6f4UuvbTiff
To find the perfect JN0-364 practice materials for the exam, you search and re-search without reaching the final decision and compare advantages and disadvantages with materials in the market. With systemic and methodological content within our JN0-364 practice materials, they have helped more than 98 percent of exam candidates who chose our JN0-364 guide exam before getting the final certificates successfully.
| Section | Objectives |
|---|---|
| Topic 1: Troubleshooting and Operations | - Network troubleshooting methodology
|
| Topic 2: MPLS and Service Provider Technologies | - VPN services
|
| Topic 3: BGP and Routing Policy | - Routing policy control
|
| Topic 4: Service Provider Architecture & Junos Fundamentals | - Service provider network design basics
|
| Topic 5: OSPF and IS-IS Routing Protocols | - IS-IS operation in service provider networks
|
>> Reliable JN0-364 Dumps Book <<
Our JN0-364 exam questions are totally revised and updated according to the changes in the syllabus and the latest developments in theory and practice. We carefully prepare the JN0-364 test guide for the purpose of providing high-quality products. All the revision and updating of products can graduate the accurate information about the JN0-364 Guide Torrent you will get, let the large majority of student be easy to master and simplify the content of important information. Our product JN0-364 test guide delivers more important information with fewer questions and answers.
NEW QUESTION # 162 
Referring to the exhibit, which protocol would automatically create a full mesh of label-switched paths between MPLS-enabled routers?
Answer: A
Explanation:
In Juniper Networks Junos OS, theLabel Distribution Protocol (LDP)is specifically designed to automate the creation of Label Switched Paths (LSPs) based on the information provided by the underlying Interior Gateway Protocol (IGP), such as OSPF or IS-IS. When LDP is enabled on a set of interfaces within an OSPF area (as shown in the exhibit with Area 0.0.0.0), it automatically discovers neighbors and exchanges label mappings for all known unicast routes in the routing table.
The defining characteristic of LDP in this context is its "topology-driven" nature. Unlike RSVP (Resource Reservation Protocol), which typically requires the manual configuration of each LSP ingress point and destination, LDP follows the IGP's shortest path tree to automatically build afull meshof LSPs between all participating routers. This means that every Provider Edge (PE) and Provider (P) router in the exhibit-PE1, PE2, PE3, P1, P2, and P3-will establish label-switched connectivity to every other router without the administrator having to define individual tunnels.
LDP accomplishes this through a downstream-unsolicited label distribution mode by default in Junos. Each router assigns a local label for its loopback address and other prefixes and advertises these to its neighbors.
Because every router is performing this action for every reachable prefix in the OSPF domain, a complete fabric of label-switched paths is formed. While RSVP is more robust for traffic engineering and bandwidth reservation, LDP is the preferred protocol for creating a simple, scalable full mesh of LSPs for applications like Layer 3 VPNs or internal BGP tunneling where complex path manipulation is not required. BFD is a failure detection protocol, and BGP is used for service signaling, making LDP the only correct choice for automatic mesh creation.
NEW QUESTION # 163
Which OSPF packet type is used to initiate and maintain neighbor relationships?
Answer: C
Explanation:
TheHello packetis the most basic, yet most vital, component of the OSPF protocol. It serves as the primary mechanism for neighbor discovery, parameter negotiation, and "keepalive" functionality. Per Juniper Networks' routing documentation, OSPF routers use the Hello protocol to dynamically discover other OSPF- enabled routers on their directly connected segments.
When OSPF is enabled on a Junos interface, the router begins multicasting Hello packets (typically to the
224.0.0.5"All OSPF Routers" address). This initiates the neighbor relationship. For two routers to move beyond theInitstate and become neighbors, they must agree on several critical parameters contained within the Hello packet:
* Area ID:Routers must be in the same OSPF area.
* Authentication:Passwords or keys must match.
* Timers:The Hello and Dead intervals must be identical.
* Options:Such as Stub area flags.
Beyond the initial "initiation," the Hello packet is used tomaintainthe relationship. By continuously sending these packets at a fixed interval (the Hello interval), a router signals to its peers that it is still functional. If a router stops receiving Hello packets from a neighbor for a duration exceeding theDead Interval, it declares the neighbor "down," flushes the associated LSAs from the database, and triggers a new SPF calculation.
Furthermore, on multi-access networks like Ethernet, the Hello packet is the vehicle for the election of the Designated Router (DR)andBackup Designated Router (BDR). By exchanging priority values and Router IDs within the Hello packets, the segment can elect a central point of contact to minimize the number of adjacencies required on the wire.
NEW QUESTION # 164
During OSPF neighbor establishment, which packet type is used to describe the contents of the link-state database?
Answer: C
Explanation:
The Database Description packet is used during OSPF neighbor establishment to summarize the contents of a router's link-state database. It contains headers of the LSAs so neighboring routers can compare databases and determine which LSAs need to be requested to synchronize their databases.
NEW QUESTION # 165
Referring to the exhibit, which statement is correct?
Answer: C
Explanation:
Referring to the configuration in the exhibit, R1 is set to export the 3rd_Policy to the neighbor at
192.168.1.5. Since 3rd_Policy permits the 10.200.3.0/24 prefix, only that prefix will be advertised to the neighbor.
NEW QUESTION # 166
You are configuring BGP on a Juniper router to peer with an external provider. After committing the configuration, the BGP session remains in the Idle state. Which configuration issue would prevent the BGP session from progressing beyond the Idle state?
Answer: C
Explanation:
In the BGP finite state machine, theIdlestate is the "stop" or "start" point of the protocol. When a session is stuck in Idle, it means the BGP process is either administratively disabled or, more commonly, is unable to initiate the underlying TCP connection required for BGP.
According to Juniper Networks Service Provider documentation, the most common reason for a BGP session to remain in Idle is a lack ofrouting reachability. For BGP to move to theConnectstate, the Junos kernel must have a route to the IP address specified in the neighbor statement. If thepeer IP address is unreachable (Option A)-meaning there is no route in inet.0 (via OSPF, IS-IS, or static)-the router cannot initiate the TCP three-way handshake on port 179. Consequently, the state machine will never progress.
Analysis of incorrect options:
* Option B:BGP does not care if the local AS is higher or lower than the peer's; it only cares if they match the configuration. AS numbers are identifiers, not priorities.
* Option C:A mismatchedRouter IDdoes not prevent a session from leaving the Idle state. It would typically cause the session to reach theOpenConfirmstate, and then fail with a "Notification" message due to a collision or identification error.
* Option D:While a mismatchedgroup type(internal vs. external) will cause the session to fail, it usually fails during theOpenmessage exchange (OpenSent state) because the AS numbers provided will not match the expected peer type (IBGP vs. EBGP).
Only the lack of a path to the neighbor (reachability) keeps the session at the very beginning of the process:
theIdlestate.
NEW QUESTION # 167
......
You can download a free demo of Juniper - JN0-364 exam study material at Pass4guide The free demo of JN0-364 exam product will eliminate doubts about our Service Provider Routing and Switching, Specialist (JNCIS-SP) PDF and practice exams. You should avail this opportunity of JN0-364 exam dumps free demo. It will help you pay money without any doubt in mind. We ensure that our Service Provider Routing and Switching, Specialist (JNCIS-SP) exam questions will meet your Service Provider Routing and Switching, Specialist (JNCIS-SP) test preparation needs. If you remain unsuccessful in the JN0-364 test after using our JN0-364 product, you can ask for a full refund. Pass4guide will refund you as per the terms and conditions.
Latest JN0-364 Exam Cram: https://www.pass4guide.com/JN0-364-exam-guide-torrent.html
P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by Pass4guide: https://drive.google.com/open?id=1pfIy4O6lXHl-KSy6o5d2L6f4UuvbTiff