Cisco 300-110 인증시험은 최근 가장 핫한 시험입니다. 인기가 높은 만큼Cisco 300-110시험을 패스하여 취득하게 되는 자격증의 가치가 높습니다. 이렇게 좋은 자격증을 취득하는데 있어서의 필수과목인Cisco 300-110시험을 어떻게 하면 한번에 패스할수 있을가요? 그 비결은 바로DumpTOP의 Cisco 300-110덤프를 주문하여 가장 빠른 시일내에 덤프를 마스터하여 시험을 패스하는것입니다.
| Section | Weight | Objectives |
|---|---|---|
| Wired and Wireless Infrastructure | 30% | - Design for data, voice, video, location - Design radio management - Physical infrastructure requirements - Design high-density wireless networks - Design wireless bridging (mesh) - Logical infrastructure requirements |
| WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
| Mobility | 25% | - Optimize client roaming - Design mobility groups - Site Tags - Validate mobility tunneling |
| Wireless Site Survey | 25% | - Predictive site survey - Post-deployment site survey - Planning tools and network metrics evaluation - Layer 1 site survey analysis - Material attenuation and its design effects - Collect design requirements and evaluate constraints - Pre-deployment site survey |
Cisco 300-110인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리Cisco 300-110인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.
질문 # 36
An engineer configured the optimized client roaming on Cisco WLC with an RSSI threshold of -72 dBm.
Clients report frequent disconnections. What must be configured for the AP to guide the client to a better AP?
정답：D
설명：
The scenario presents a critical distinction in where Cisco WLC features are configured. Optimized roaming on Cisco WLC is a radio-level feature that monitors connected client RSSI and, when a client ' s signal falls below the configured threshold (-72 dBm), triggers a disassociation to force the client to reconnect to a stronger AP. However, without a mechanism to guide the client proactively before reaching the threshold, clients that disassociate simply reconnect to whatever AP their device selects, potentially causing the reported frequent disconnections. BSS Transition Management (802.11v) is configured at the SSID level and provides the complementary mechanism: before the client reaches the RSSI threshold, the AP sends a BSS Transition Management Request pointing the client toward a specific target AP with stronger signal. The correct architecture requires: optimized roaming configured at the radio level (triggering disconnection when RSSI falls too low) combined with BSS transition enabled at the SSID level (guiding the client to a better AP before forced disconnection). Options C and D incorrectly reverse the configuration levels for these features.
Disabling coverage hole detection (Option B) addresses a different problem and would not resolve the disconnection issue. Reference: WLSD Study Guide - Optimized Roaming Configuration, BSS Transition Management (802.11v), Client Roaming Architecture on Cisco WLC.
질문 # 37
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco
9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
정답：B
설명：
In a mixed deployment where a Cisco Catalyst 9800 IOS XE WLC operating in SSO is required to establish a mobility peer relationship with a legacy AireOS WLC, the critical configuration requirement is that the 9800 SSO pair presents a single, consistent mobility MAC address to all peer WLCs. When the 9800 is in SSO mode, the active and standby controllers function as a single logical entity, but AireOS WLCs identify mobility peers by MAC address. If the MAC address changes during an SSO switchover, the AireOS peer will detect the change and tear down the mobility tunnel, disrupting inter-controller client roaming. The command ' wireless mobility mac-address < MAC > ' configures a static, persistent mobility MAC address on the 9800 SSO pair that remains constant regardless of which physical unit is active. This ensures the AireOS WLC always identifies the 9800 pair by the same MAC address, maintaining the mobility tunnel and enabling seamless client roaming. Option A configures the HA interface for SSO synchronization but not for AireOS mobility interoperability. Option B sets a default gateway. Option D enables management gateway failover, unrelated to mobility peer identification. Reference: WLSD Study Guide - IOS XE WLC SSO Configuration, AireOS to 9800 Migration, Mobility Peer MAC Address Management.
질문 # 38
An engineer is designing a FlexConnect deployment for 40 remote branch offices, each with a 10 Mbps WAN circuit back to a central Catalyst 9800 WLC. Which design consideration must be validated before deployment?
정답：D
설명：
FlexConnect is designed specifically for branch deployments where APs are separated from the controller by a WAN link. Cisco supports a maximum round-trip time of 300 ms between the FlexConnect AP and the WLC, which accommodates the latency typical of terrestrial WAN and even some satellite links. This tolerance is possible because in FlexConnect local switching mode, user data is bridged directly onto the local branch VLAN and never traverses the WAN - only CAPWAP control traffic crosses the link. The 20 ms figure applies to centrally switched CAPWAP designs in a campus, where all client data is tunneled to the controller and latency directly impacts user traffic. Deploying a local WLC at every branch defeats the cost model that FlexConnect exists to address, and forcing central switching would push all branch user traffic across the 10 Mbps circuit, saturating it.
질문 # 39
A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast. Which configuration must be identical between the three WLCs to validate communication?
정답：C
질문 # 40
A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment.
Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)
정답：B,C
설명：
For APs to be able to fail over between a primary SSO pair in one data center and a standalone WLC in a remote data center connected via WAN with firewalls, two design requirements must be met. First, a mobility tunnel must be created between the wireless controllers (Option A). The mobility tunnel enables the controllers to exchange mobility control messages, peer information, and eventually AP context when failover occurs. Without the mobility tunnel, the remote WLC is not recognized as a valid failover target by the APs through the mobility domain. Second, UDP ports 16666 and 16667 must be open through the firewalls between the controllers (Option D).
UDP port 16666 is used for mobility control traffic and UDP port 16667 is used for mobility data traffic -- both must be permitted through the firewalls at both data centers for the mobility tunnel to establish and function.
질문 # 41
......
DumpTOP는 여러 it인증에 관심 있고 또 응시하고 싶으신 분들에게 편리를 드립니다. 그리고 많은 분들이 이미 DumpTOP제공하는 덤프로 it인증시험을 한번에 패스를 하였습니다. 즉 우리 DumpTOP 덤프들은 아주 믿음이 가는 보장되는 덤프들이란 말이죠. DumpTOP에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Cisco인증300-110시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Cisco인증300-110시험에 많은 도움이300-110될 것입니다. DumpTOP 가 제공하는300-110테스트버전과 문제집은 모두300-110인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에300-110시험을 패스하실 수 있습니다.
300-110적중율 높은 인증시험덤프: https://www.dumptop.com/Cisco/300-110-dump.html