DOWNLOAD the newest RealVCE NSE6_EDR_AD-7.0 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1BnmxvS7maChqP3cxTTrEjDpBArB-44lD
In addition to the NSE6_EDR_AD-7.0 study materials, our company also focuses on the preparation and production of other learning materials. If you choose our NSE6_EDR_AD-7.0 study materials this time, I believe you will find our products unique and powerful. Then you don't have to spend extra time searching for information when you're facing other exams later, just choose us again. As long as you face problems with the exam, our company is confident to help you solve. Give our NSE6_EDR_AD-7.0 Study Materials a choice is to give you a chance to succeed.
| Section | Objectives |
|---|---|
| FortiEDR Architecture and Components | - FortiEDR components overview (agents, management console, collectors) - System architecture and deployment models |
| Forensics and Investigation | - Event analysis and telemetry review - Endpoint investigation workflows |
| Policy Configuration and Management | - Policy tuning and exclusions - Prevention and detection policies |
| Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
>> Reliable NSE6_EDR_AD-7.0 Dumps Sheet <<
Are you worrying about how to pass Fortinet NSE6_EDR_AD-7.0 test? Now don't need to worry about the problem. RealVCE that committed to the study of Fortinet NSE6_EDR_AD-7.0 certification exam for years has a wealth of experience and strong exam dumps to help you effectively pass your exam. Whether to pass the exam successfully, it consists not in how many materials you have seen, but in if you find the right method. RealVCE is the right method which can help you sail through Fortinet NSE6_EDR_AD-7.0 Certification Exam.
NEW QUESTION # 14
Which two criteria are required for integrating FortiEDR with the Fortinet Security Fabric? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C .
For Fortinet Security Fabric correlation through FortiAnalyzer or FortiAnalyzer Cloud, the FortiEDR guide states that FortiEDR can integrate with FortiAnalyzer/FortiAnalyzer Cloud "to correlate data between FortiEDR and the Fortinet Security Fabric and issue eXtended detection alerts." To complete this, you must configure an eXtended Detection Source connector and enable eXtended Detection rules and FortiEDR Threat Hunting event collection.
The prerequisites include connectivity from the FortiEDR Central Manager to Fortinet Cloud Services (FCS) . The same prerequisite list also requires either a FortiAnalyzer administrator account with JSON API access enabled or, for FortiAnalyzer Cloud, a valid FortiCloud API user with read/write access to the FortiAnalyzer Cloud portal.
Option B is wrong because a Forensics add-on license is not listed as a requirement for this integration.
Option D is badly worded and not correct. A Jumpbox with connectivity to FortiAnalyzer is required, and the guide points to FortiEDR Core setup for Jumpbox configuration, but the answer option says Core with core- only functionality , which is not the stated requirement.
=========
NEW QUESTION # 15
Refer to the exhibit.
Based on the threat hunting event details shown in the exhibit, which two statements about the event are true?
(Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and D .
The exhibit shows a Process Creation activity event where cmd.exe is the source process and PING.EXE is the target process. The displayed Executing user is R2D2-KVM63\fortinet, and the command line shows fortinet.com, which means the user fortinet executed a ping command targeting fortinet.com.
The FortiEDR guide explains that Threat Hunting activity events consist of a source , an action , and a target
. It also states that Process Actions have another process as the target and include process-related actions such as Process Creation .
The exhibit also shows file-related details for the executable, including the executable path, product, SHA1 hash, and command line. In FortiEDR Threat Hunting, process execution events are tied to executable-file metadata, so the event is associated with the executable file involved in the process action. This supports B in the exam's intended wording.
Option A is not reliable because the screenshot does not prove MITRE details are unavailable; it only shows that no MITRE detail is visible in the current portion of the details pane. The guide states that MITRE indications appear when an activity event has related MITRE information.
Option C is wrong because the screenshot shows the process status as Running and does not show a block indicator. A green check does not mean blocked; it indicates a trusted/signed/allowed status context. There is no evidence that PING.EXE was blocked.
NEW QUESTION # 16
What specific action does FortiEDR take when the Zero Trust Device Tagging playbook is activated?
(Choose one answer)
Answer: C
Explanation:
The correct answer is C.
The FortiEDR 7.0.0 Administration Guide explains that Identity Management integration can use FortiClient EMS. The connector requires API credentials or FortiCloud credentials depending on whether FortiClient EMS is on-premises or cloud-based. The guide states that for the out-of-the-box action, such as Zero Trust device tagging on FortiClient EMS, FortiEDR tags the device as non-trusted in the identity management system and specifies the classification tag to apply in the Tag name field.
The guide also lists predefined FortiClient EMS 7.2 or later fabric tags used by FortiEDR, including FortiEDR_Malicious, FortiEDR_PUP, FortiEDR_Suspicious, FortiEDR_Likely_Safe, and FortiEDR_Probably_Good. These tags are used by FortiClient EMS to tag the endpoint based on FortiEDR classification.
Finally, the guide states that to configure the automated response, the administrator must go to Security Settings > Playbooks, open the relevant Playbook policy, and place a checkmark in the relevant classification column next to the Zero Trust device tagging row under Remediation. FortiEDR is then configured to automatically tag a device as non-trusted when a security event is triggered.
Options A, B, and D are wrong. FortiEDR does not remove unmanaged endpoints, does not apply a default tag to every endpoint, and does not disable the endpoint merely until a tag is assigned. The action is API- based FortiClient EMS tagging tied to FortiEDR event classification
NEW QUESTION # 17
Which two statements correctly describe the IoT probing process on FortiEDR? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B and C .
The FortiEDR 7.0.0 Administration Guide explains that IoT device discovery continuously identifies newly connected non-workstation devices, such as printers, cameras, and media devices. During discovery, each relevant Collector periodically probes nearby neighboring devices. The guide states that nearby devices usually respond by providing information about themselves, including the device/host name and IP address .
This directly supports option B .
Option C is also correct because the guide states that Collectors in degraded , disabled , or isolated states do not take part in the IoT probing process. It also says FortiEDR uses the most powerful Collectors in each subnet and excludes weaker Collectors, including disabled and degraded Collectors.
Option A is wrong because the guide explicitly says Collectors running on servers do not take part in IoT probing. Option D is wrong because IoT probing is not described as deep packet inspection of all neighboring traffic; it is a discovery/probing process used to identify nearby devices and collect basic device information.
=========
NEW QUESTION # 18
What action does an on-premises reputation server take when it receives a hash request that is not found in its local database? (Choose one answer)
Answer: A
Explanation:
The correct answer is C .
The FortiEDR 7.0.0 Administration Guide states that for on-premises deployments, the on-premise reputation service requests missing hashes from the cloud reputation service . If a proxy is not enabled, it requests the missing hashes from the cloud reputation service through the manager nginx . If a proxy is enabled, the on-premises reputation service requests the missing hashes through the proxy.
So, when the local reputation database does not contain the requested hash, the on-premises reputation server does not ignore the request, wait for endpoint input, or automatically block the application. It queries the cloud reputation service for the missing hash reputation data.
=========
NEW QUESTION # 19
......
But there are question is that how you can pass the NSE6_EDR_AD-7.0 exam and get a certificate. The best answer is to download and learn our NSE6_EDR_AD-7.0 quiz torrent. Our products will help you get what you want in a short time. You just need little time to download and install it after you purchase, then you just need spend about 20~30 hours to learn it. We are glad that you are going to spare your precious time to have a look to our NSE6_EDR_AD-7.0 Exam Guide.
Exam NSE6_EDR_AD-7.0 Forum: https://www.realvce.com/NSE6_EDR_AD-7.0_free-dumps.html
BTW, DOWNLOAD part of RealVCE NSE6_EDR_AD-7.0 dumps from Cloud Storage: https://drive.google.com/open?id=1BnmxvS7maChqP3cxTTrEjDpBArB-44lD