P.S. Free 2026 Fortinet NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ExamDiscuss: https://drive.google.com/open?id=1rjVAbH7LEvGFo2laU3rPi90VvbkiCQM2
Our NSE5_FSW_AD-7.6 study practice materials have so many advantages that basically meet all the requirements of the user. If you have a good comments or suggestions during the trial period, you can also give us feedback in a timely manner. Our NSE5_FSW_AD-7.6 study materials will give you a benefit, we do it all for the benefits of the user. Our pass rate for NSE5_FSW_AD-7.6 Training Material is as high as 99% to 100%, which is proved from our loayl customers, and you will be the next to benefit from it. Our NSE5_FSW_AD-7.6 practice files look forward to your joining in.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 FortiSwitch 7.6 Administrator |
| Exam Number: | NSE5_FSW_AD-7.6 |
| Certificate Validity Period: | 2 years |
| Exam Duration: | 70 minutes |
| Passing Score: | 70% |
| Real Exam Qty: | 30-40 |
| Exam Format: | Multiple select, Multiple choice |
| Related Certifications: | Fortinet NSE 4 FortiGate Administrator Fortinet NSE 5 Network Security Analyst |
| Exam Price: | $200 USD (varies by region) |
| Available Languages: | English |
| Recommended Training: | Fortinet Network Security Expert (NSE) Training Path FortiSwitch 7.6 Administrator Course |
| Exam Registration: | Fortinet Certification Portal Fortinet Training Institute |
| Sample Questions: | Fortinet NSE5_FSW_AD-7.6 Sample Questions |
| Exam Way: | Online proctored or onsite via Pearson VUE testing centers |
| Pre Condition: | Recommended: Fortinet NSE 4 certification or equivalent networking knowledge |
| Official Syllabus URL: | https://www.fortinet.com/training/certification |
>> NSE5_FSW_AD-7.6 Study Demo <<
NSE5_FSW_AD-7.6 guide torrent is authoritative. Over the years, our study materials have helped tens of thousands of candidates successfully pass the exam. NSE5_FSW_AD-7.6 certification training is prepared by industry experts based on years of research on the syllabus. These experts are certificate holders who have already passed the certification. They have a keen sense of smell for the test. Therefore, NSE5_FSW_AD-7.6 certification training is the closest material to the real exam questions. With our study materials, you don't have to worry about learning materials that don't match the exam content. With NSE5_FSW_AD-7.6 Study Guide, you only need to spend 20 to 30 hours practicing to take the exam. In addition, NSE5_FSW_AD-7.6 certification training has a dedicated expert who updates all data content on a daily basis and sends the updated content to the customer at the first time. Therefore, using NSE5_FSW_AD-7.6 guide torrent, you don't need to worry about missing any exam focus.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 33
What are two ways in which automatic MAC address quarantine works on FortiSwitch? (Choose two.)
Answer: B,D
Explanation:
Reference: FortiSwitch 7.2 Study Guide, page 263
NEW QUESTION # 34
Refer to the exhibit.
The command diagnose switch physical-ports summary is executed on FortiSwitch.
Based on the VLAN assignments shown in the output, what is the most likely management configuration of this FortiSwitch? (Choose one answer)
Answer: B
Explanation:
The output of the diagnose switch physical-ports summary command provides critical insight into how a FortiSwitch is being managed by examiningVLAN assignments,tag protocol identifiers (TPID), and internal port behavior. In the provided exhibit, several ports-includingport1,port5, and theinternalport- are assigned toVLAN 4094.
According to the FortiSwitchOS 7.6 Administrator Guide,VLAN 4094 is reserved for FortiLink management trafficwhen a FortiSwitch is managed by a FortiGate. FortiLink uses this dedicated VLAN to carry control-plane traffic such as configuration synchronization, monitoring data, LLDP-based discovery, and keepalive messages between the FortiGate and FortiSwitch. The presence of VLAN 4094 on physical interfaces is a strong and explicit indicator ofFortiGate-managed mode.
In standalone or local management mode, FortiSwitch ports typically default toVLAN 1or administrator- defined VLANs, andVLAN 4094 is not automatically assigned. Similarly, FortiSwitch Cloud-managed devices do not use VLAN 4094 in this manner, as cloud management relies on IP connectivity to FortiEdge Cloud rather than FortiLink encapsulation.
Additionally, the internal port showing VLAN 4094 further confirms FortiLink operation, as this internal interface is used by the switch ASIC to communicate with the FortiGate over the FortiLink tunnel. This behavior is documented in FortiOS 7.6 and FortiSwitchOS 7.6 design guides as characteristic of FortiGate- managed FortiSwitch deployments.
Therefore, based on the VLAN assignments shown-specifically the use ofVLAN 4094-the most accurate and fully verified conclusion is thatthe FortiSwitch is managed by FortiGate, makingOption Bthe correct answer.
NEW QUESTION # 35
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
Answer: D
Explanation:
To cause endpoints to exchange PoE information and negotiate power with the managed FortiSwitch via LLDP, you should configure the LLDP profile to include power management in the advertised LLDP-MED TLVs. Here are the steps:
* Access the LLDP Profile Configuration:Start by entering the LLDP profile configuration mode with the command:
config switch-controller lldp-profile
edit "LLDP-PROFILE"
* Enable MED-TLVs:Ensure that MED-TLVs (Media Endpoint Discovery TLVs) are enabled. These TLVs are used for extended discovery relating to network policies, including PoE, and are essential for PoE negotiation. They include power management which is crucial for the negotiation of PoE parameters between devices. The command to ensure network policies are set might look like:
set med-tlvs network-policy
* Add Power Management TLV:Specifically add or ensure the power management TLV is part of the configuration. This will advertise the PoE capabilities and requirements, enabling dynamic power allocation between the FortiSwitch and the connected devices (like VoIP phones or wireless access points). This can typically be done within the network-policy settings:
config med-network-policy
edit <policy_index>
set poe-capability
next
end
* Save and Apply Changes:Exit the configuration blocks properly ensuring changes are saved:
End
* Verify Configuration:It's always good practice to verify that your configurations have been applied correctly. Use the appropriateshoworgetcommands to review the LLDP profile settings.
By adding the power management as part of LLDP-MED TLVs, the FortiSwitch will be able to communicate its power requirements and capabilities to the endpoints, thereby facilitating a dynamic power negotiation that is crucial for efficient PoE utilization.
References:For more detailed information and additional configurations, you can refer to the FortiSwitch Managed Switches documentation available on Fortinet's official documentation site:Fortinet Product Documentation
NEW QUESTION # 36
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
Answer: C
Explanation:
When FortiGate exports configuration settings to a managed FortiSwitch stack with sampling mode set to
"perimeter is true," the behavior is:
* B. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.This setting ensures that all incoming traffic on normal operational ports is sampled for monitoring and analysis purposes, but it excludes the inter-chassis link (ICL) and inter- switch link (ISL) interfaces from sampling. These exclusions are typically made to prevent the duplication of sampled data and to reduce unnecessary load on the monitoring system, as these links often carry traffic already monitored at other points.
Options A and D are incorrect because they either generalize the sampling across all interfaces without exceptions or incorrectly specify egress sampling on management interfaces. Option C is also incorrect as FortiGate can modify existing sampling settings to fit the perimeter-based configuration requirement.
NEW QUESTION # 37
In which two ways can you assign a FortiSwitch port to a VDOM using multi-tenancy setup? (Choose two.)
Answer: B,D
Explanation:
In a multi-tenancy setup on FortiGate, you can assign a FortiSwitch port to a VDOM in two primary ways:
* Switch the FortiLink Interface to the Target VDOM (A): This method involves configuring the FortiLink interface, which is the dedicated interface used to manage FortiSwitch units from FortiGate, to operate within a specific VDOM. This effectively assigns all ports on the FortiSwitch, managed through that FortiLink interface, to the designated VDOM.
* Create a Virtual Port Pool on the FortiGate CLI (C): Virtual port pools are created on FortiGate and allow ports from FortiSwitch to be grouped and assigned to a VDOM. This method is more granular and flexible, as it allows specific ports on the FortiSwitch to be dedicated to different VDOMs without requiring the entire switch or FortiLink interface to be dedicated to a single VDOM.
NEW QUESTION # 38
......
NSE5_FSW_AD-7.6 Exam Vce: https://www.examdiscuss.com/Fortinet/exam/NSE5_FSW_AD-7.6/
P.S. Free & New NSE5_FSW_AD-7.6 dumps are available on Google Drive shared by ExamDiscuss: https://drive.google.com/open?id=1rjVAbH7LEvGFo2laU3rPi90VvbkiCQM2