Using PDFDumps's H35-581_V2.0 test certification training materials to pass H35-581_V2.0 certification exam is easy. Our H35-581_V2.0 test certification training materials is made up of senior IT specialist team through their own exploration and continuous practice and research. Our PDFDumps's H35-581_V2.0 test certification training materials can help you in your first attempt to pass H35-581_V2.0 exam easily.
| Section | Objectives |
|---|---|
| Topic 1: Radio Network Planning | - Site selection and dimensioning - Capacity planning - Coverage planning |
| Topic 2: Troubleshooting and Performance Enhancement | - Fault diagnosis in 5G networks - Performance tuning methods |
| Topic 3: Radio Network Optimization | - KPI analysis and optimization - Mobility optimization - Interference analysis and mitigation |
| Topic 4: 5G Radio Network Fundamentals | - Radio access network basics - 5G NR system architecture and principles |
>> Online H35-581_V2.0 Tests <<
Do you want to get the H35-581_V2.0 exam braindumps as quickly as you finish paying, then choose the H35-581_V2.0 study material of us, we can do this for you. You can pass the exam only just need to spend about 48 to 72 hours in practicing. The H35-581_V2.0 exam braindumps of us is verified by experienced experts, therefore the quality and the accuracy of the H35-581_V2.0 Study Materials can be guaranteed, and we also pass guarantee and money back guarantee for your fail to pass the exam.
NEW QUESTION # 24
Which of the following messages can carry NSSAI information?
Select All that Apply
Answer: A,B
Explanation:
Options C and D are correct because Network Slice Selection Assistance Information (NSSAI) can be conveyed through both the NAS Registration Request and the NR RRCSetupComplete message.
In 5G, NSSAI enables the network to identify the network slices requested or supported for a particular UE.
Individual slices are represented by Single Network Slice Selection Assistance Information (S-NSSAI), comprising a Slice/Service Type (SST) and an optional Slice Differentiator (SD).
Option C - Registration Request: During 5G registration, the UE may include Requested NSSAI in its NAS Registration Request. This enables the Access and Mobility Management Function (AMF) to evaluate the requested slices against subscription information and network availability.
Option D - RRC Setup Complete: The NR RRCSetupComplete message includes an optional s-NSSAI- List information element. When supplied by the upper layers, this element can communicate S-NSSAI information during RRC connection establishment.
Options A and B are incorrect because RRCSetup and RRCSetupRequest do not contain the corresponding NSSAI information element.
The distinction is that the NAS Registration Request communicates slice information for core-network registration, whereas RRCSetupComplete can provide relevant slice assistance information through access- stratum signaling.
Therefore, C and D are the correct selections.
Official Reference: 3GPP TS 38.331, Section 6.2.2, RRCSetupComplete Message ; TS 24.501, Sections
4.6.2.3 and 8.2.6, Registration Request and Requested NSSAI .
NEW QUESTION # 25
After a UE has accessed an LTE network, which of the following conditions must be satisfied for the eNodeB to send 5G B1 measurement configuration messages?
Select All that Apply
Answer: A,B,C
Explanation:
Options A, B, and C describe the principal eligibility and configuration requirements for initiating NR inter- RAT measurements in an E-UTRA-NR Dual Connectivity (EN-DC) deployment.
In NSA architecture, the LTE eNodeB operates as the Master Node and controls the initial measurement and secondary-node addition procedures.
Option A: The core network must permit the UE to use the applicable dual-connectivity service. Subscription restrictions and network indications can prevent the eNodeB from enabling NR secondary connectivity.
Option B: The UE must report capabilities compatible with EN-DC operation. The relevant capability framework was introduced in 3GPP Release 15, although the precise supported band combinations and EN- DC capability fields determine actual eligibility.
Option C: The LTE network must have the necessary dual-connectivity functionality enabled, together with appropriate neighboring NR frequency and measurement configurations. Incorrect frequency information can prevent the UE from measuring the intended NR cells.
Option D: The UMPTa is a Huawei hardware-board designation. The standardized B1 measurement configuration procedure does not require this specific board model. Hardware compatibility depends on the actual Huawei product and software release.
Therefore, A, B, and C represent the intended operational conditions, while D incorrectly introduces a specific hardware model as a universal requirement.
Official Reference: 3GPP TS 37.340, E-UTRA and NR Multi-Connectivity , EN-DC Architecture and Secondary Node Addition; TS 36.331, Inter-RAT Measurement Configuration .
Technical warning / qualification: The precise Huawei NSA feature-switch and board-compatibility conditions require the relevant equipment-version documentation; 3GPP establishes the general signaling requirements.
NEW QUESTION # 26
Which of the following channels or signals uses the same transmit power as the PUSCH?
Answer: D
Explanation:
In NR, SRS is transmitted by the UE to provide uplink channel-sounding information for scheduling, channel estimation, beam management, and MIMO-related procedures.
The SRS transmission-power calculation follows the uplink power-control principles specified in 3GPP TS
38.213.
These principles include configured target-power parameters, transmission bandwidth, estimated path loss, path-loss compensation, and applicable closed-loop adjustments.
Under certain configurations, SRS may share a power-control adjustment state with PUSCH. Under other configurations, separate adjustment states and SRS-specific parameters are used.
Consequently, SRS transmission power is related to the PUSCH power-control mechanism but is not necessarily numerically identical to PUSCH transmit power .
PRACH has its own random-access transmit-power and power-ramping procedures.
PUCCH uses a separate uplink power-control calculation, while PDSCH is a downlink physical channel.
The intended comparison therefore points toward SRS, represented incorrectly as SRC in the original choices.
Official Reference: 3GPP TS 38.213, Sections 7.1 and 7.3, PUSCH and SRS Transmit Power Control .
Technical warning / qualification: Replace option C, SRC , with SRS . The question should also state uses a related power-control mechanism rather than uses the same transmit power , because the latter is not universally correct.
NEW QUESTION # 27
What is the broadcast periodicity of the MIB in 5G?
Answer: A
Explanation:
The NR Master Information Block (MIB) has a nominal broadcast scheduling periodicity of 80 milliseconds, with repetitions transmitted within the applicable MIB scheduling period.
The MIB is an essential component of 5G NR system-information acquisition. It is carried on the Broadcast Channel (BCH), physically transmitted through the Physical Broadcast Channel (PBCH) within a Synchronization Signal/PBCH Block (SSB).
The MIB contains information required for the UE to acquire System Information Block 1 (SIB1), including essential system-frame and control-channel configuration parameters.
Its information elements include the system frame number components, subcarrier spacing indication, SSB subcarrier offset, and parameters associated with the initial PDCCH configuration.
A distinction must be made between the MIB's nominal 80 ms scheduling periodicity and the repetition periodicity associated with SSB transmission.
An SSB burst may repeat at intervals such as 5, 10, 20, 40, 80, or 160 ms, depending on the applicable configuration and operating procedure.
For typical deployments, the UE may therefore receive repeated PBCH transmissions more frequently than every 80 ms.
The question concerns the standardized nominal MIB scheduling period rather than the interval between every PBCH transmission.
Therefore, 80 ms is the correct answer.
Official Reference: 3GPP TS 38.331, Section 5.2.1.2, System Information Scheduling ; TS 38.212, Section
7.1, Broadcast Channel .
NEW QUESTION # 28
Only one codeword is needed when four streams are transmitted over the air interface.
Answer: B
Explanation:
The statement is true because 5G NR supports mapping a single codeword to as many as four spatial transmission layers in the standard downlink spatial-multiplexing configuration.
A codeword represents a sequence of encoded data bits generated through channel coding and associated processing before modulation and layer mapping.
Spatial layers are logical MIMO transmission streams used to transport data across multiple spatial dimensions of the radio channel.
The number of codewords is not necessarily equal to the number of MIMO layers.
According to 3GPP TS 38.211, the PDSCH codeword-to-layer mapping procedure supports one codeword for transmissions using one, two, three, or four layers.
For example, when four layers are scheduled, modulation symbols from the single codeword are distributed across four layers according to the specified mapping procedure.
When the configured downlink transmission uses five to eight spatial layers, two codewords are supported, with the corresponding layer allocation determined by the applicable mapping table.
This distinction is essential when evaluating MIMO transmission rank, transport-block processing, HARQ operation, and channel-coding requirements.
Consequently, a four-layer spatial-multiplexing transmission requires only one codeword under the standardized NR mapping configuration.
Official Reference: 3GPP TS 38.211, Section 7.3.1.3, Table 7.3.1.3-1, Codeword-to-Layer Mapping for Spatial Multiplexing .
NEW QUESTION # 29
......
It is universally accepted that in this competitive society in order to get a good job we have no choice but to improve our own capacity and explore our potential constantly, and try our best to get the related H35-581_V2.0 certification is the best way to show our professional ability, however, the H35-581_V2.0 Exam is hard nut to crack but our H35-581_V2.0 preparation questions are closely related to the exam, it is designed for you to systematize all of the key points needed for the H35-581_V2.0 exam.
Real H35-581_V2.0 Dumps Free: https://www.pdfdumps.com/H35-581_V2.0-valid-exam.html