P.S. Free & New NSE4_FGT_AD-7.6 dumps are available on Google Drive shared by Itcertking: https://drive.google.com/open?id=1X6nPc7x7NV7hrp6iMeGufF9ZKFwSsyLE
Let me tell the advandages of using the NSE4_FGT_AD-7.6 practice engine. First of all, NSE4_FGT_AD-7.6 exam materials will combine your fragmented time for greater effectiveness, and secondly, you can use the shortest time to pass the exam to get your desired certification. Our NSE4_FGT_AD-7.6 Study Materials allow you to improve your competitiveness in a short period of time. With the help of our NSE4_FGT_AD-7.6 guide prep, you will be the best star better than others.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Firewall Policies and NAT | 25% | - Policy troubleshooting - NAT and PAT configuration - IPv4 and IPv6 policies - Policy concepts and types - Virtual IP (VIP) and DNAT |
| Topic 2: Network Security | 20% | - DNS filtering - Packet flow and inspection - URL filtering - Antivirus scanning - Intrusion prevention system (IPS) - Application control |
| Topic 3: High Availability (HA) | 10% | - Failover behavior and troubleshooting - Heartbeat and synchronization - HA modes and configuration |
| Topic 4: SD-WAN | 10% | - Performance SLA monitoring - SD-WAN components and benefits - SD-WAN configuration using security profiles |
| Topic 5: FortiGate Fundamentals | 15% | - FortiOS operation modes (NAT/Transparent) - Security Fabric overview - FortiGate models and hardware architecture - Dashboard and monitoring - Initial configuration and setup |
| Topic 6: VPN Configuration | 20% | - VPN troubleshooting - VPN concentrator - IPSec VPN site-to-site - SSL-VPN fundamentals and configuration |
>> Updated NSE4_FGT_AD-7.6 Demo <<
No matter in the day or on the night, you can consult us the relevant information about our NSE4_FGT_AD-7.6 preparation exam through the way of chatting online or sending emails. I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our NSE4_FGT_AD-7.6 Study Materials. And we will give you the most considerate suggestions on our NSE4_FGT_AD-7.6 learning guide with all our sincere and warm heart.
NEW QUESTION # 51
Refer to the exhibit.
The administrator configured SD-WAN rules and set the FortiGate traffic log page to display SD-WAN- specific columns: SD-WAN Quality and SD-WAN Rule Name FortiGate allows the traffic according to policy ID 1 placed at the top. This is the policy that allows SD-WAN traffic. Despite these settings, the traffic logs do not show the name of the SD-WAN rule used to steer those traffic flows What could be the reason?
Answer: D
Explanation:
In FortiOS 7.6, SD-WAN steering decisions are recorded in traffic logs only when traffic matches an explicit SD-WAN rule (SD-WAN service rule). When no configured SD-WAN rule matches a session, FortiGate uses the implicit (default) SD-WAN rule/behavior to select a member (often resulting in load-balancing or default selection based on the configured SD-WAN algorithm).
In the exhibit, traffic is permitted by firewall policy ID 1, and the Destination Interface alternates between port1 and port2, but SD-WAN Rule Name remains empty. This is consistent with the sessions being forwarded by the implicit SD-WAN rule, which does not populate a named rule in the log columns.
Why the other options are not correct:
A: SD-WAN rule name logging is not a "delayed display" behavior requiring refresh; it is populated per- session when an explicit rule matches.
B: Application Control is not required for SD-WAN rule name to appear. Rule name logging depends on SD- WAN rule match, not on whether Application Control is enabled.
C: Feature visibility affects GUI display options, but the exhibit already shows the SD-WAN columns enabled; the issue is that no explicit SD-WAN rule is being hit.
NEW QUESTION # 52
The FortiGate device HQ-NGFW-1 with the IP address 10.0.13.254 sends logs to the FortiAnalyzer device with the IP address 10.0.13.125. The administrator wants to verify that reliable logging is enabled on HQ-NGFW-1.
Which exhibit helps with the verification?
Answer: A
NEW QUESTION # 53
Refer to the exhibits. You have implemented the application sensor and the corresponding firewall policy as shown in the exhibits.
You cannot access any of the Google applications, but you are able to access www.fortinet.com.
Which two actions would you take to resolve the issue? (Choose two.)
Answer: A,C
Explanation:
Move up Google in the Application and Filter Overrides section to set its priority to 1.
The "Excessive-Bandwidth" filter has a higher priority (1) and is configured to Block. Because Google applications generate significant bandwidth, they match this rule first and get blocked.
Moving the "Google" filter to priority 1 ensures that the monitor action for Google is applied before the block rule.
Set SSL inspection to deep-content inspection.
Google applications use HTTPS encryption, so the FortiGate cannot identify or control them unless SSL traffic is decrypted. Changing from certificate-inspection (which only inspects certificates) to deep-inspection allows FortiGate to fully analyze encrypted application traffic and properly apply the Application Control rules.
NEW QUESTION # 54
Refer to the exhibit.
An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?
Answer: C
Explanation:
In FortiOS 7.6 Application Control, security logs are generated primarily for actions such as Block or Monitor, not for Allow actions.
What is happening in the exhibit
An Application Override is configured for ABC.Com
Type: Application
Action: Allow
The application control profile is applied to a firewall policy
Logging is enabled on the firewall policy
Traffic to ABC.Com is successfully allowed
However, no security logs appear for ABC.Com.
Why no logs are generated
In FortiOS 7.6:
Application Control logs are written to Security Logs when:
An application is Blocked
An application is Monitored
When an application action is set to Allow:
The traffic is permitted silently
No application control security log is generated
Even if policy logging is enabled
This is expected and documented behavior.
To generate logs for allowed applications, the action must be set to Monitor, not Allow.
Why the other options are incorrect
A). ABC.Com is hitting the category Excessive-BandwidthIncorrect. ABC.Com has a higher-priority explicit override (priority 1), so it is not evaluated against the Excessive-Bandwidth filter.
B). The ABC.Com Type is set as Application instead of FilterIncorrect. Application-type overrides are valid and commonly used; this does not suppress logging.
C). The ABC.Com must be configured as a web filter profileIncorrect. This traffic is being evaluated by Application Control, not Web Filter.
NEW QUESTION # 55
Refer to the exhibit
A firewall policy to enable active authentication is shown.
When attempting to access an external website using an active authentication method, the user is not presented with a login prompt. What is the most likely reason for this situation?
Answer: A
Explanation:
Based on the exhibit and FortiOS 7.6 Active Authentication (captive portal) behavior, the most likely reason the user is not presented with a login prompt is that DNS is missing from the firewall policy.
What the exhibit shows
The firewall policy configured for active authentication includes:
Source: HQ_SUBNET and Remote-users
Destination: all
Services:
HTTP
HTTPS
ALL_ICMP
Security Profiles: Web filter and SSL inspection enabled
Authentication: Active (user group referenced)
DNS is not included as a service in the policy.
Why DNS is required for active authentication
In FortiOS 7.6, active authentication (captive portal) works as follows:
The user attempts to access a website using a URL (for example, www.example.com).
The client must first perform a DNS lookup to resolve the domain name.
FortiGate intercepts the initial HTTP/HTTPS request and redirects the user to the authentication portal.
If DNS traffic is blocked or not allowed:
The hostname cannot be resolved.
The HTTP/HTTPS request never properly occurs.
FortiGate has nothing to intercept, so the login prompt is never triggered.
This is explicitly documented in the FortiOS 7.6 Authentication and Captive Portal requirements, which state that DNS must be permitted for captive portal-based authentication to function correctly.
Why the other options are incorrect
A). No matching user account exists for this user
Incorrect.
If the user account did not exist, the login page would still appear, but authentication would fail after credentials are entered.
B). The Remote-users group must be set up correctly in the FSSO configuration Incorrect.
This policy is using active authentication, not FSSO.
FSSO configuration is irrelevant for active authentication login prompts.
C). The Remote-users group is not added to the Destination
Incorrect.
User groups are applied in the Source field for authentication-based policies.
Destination does not accept user groups.
NEW QUESTION # 56
......
Itcertking NSE4_FGT_AD-7.6 practice test has real NSE4_FGT_AD-7.6 exam questions. You can change the difficulty of these questions, which will help you determine what areas appertain to more study before taking your Fortinet NSE4_FGT_AD-7.6 Exam Dumps. Here we listed some of the most important benefits you can get from using our Fortinet NSE4_FGT_AD-7.6 practice questions.
NSE4_FGT_AD-7.6 Exam Torrent: https://www.itcertking.com/NSE4_FGT_AD-7.6_exam.html
BONUS!!! Download part of Itcertking NSE4_FGT_AD-7.6 dumps for free: https://drive.google.com/open?id=1X6nPc7x7NV7hrp6iMeGufF9ZKFwSsyLE