To save resources of our customers, we offer real Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam questions that are enough to master for NSE6_FNC_AD-7.6 certification exam. Our Fortinet NSE6_FNC_AD-7.6 Exam Dumps are designed by experienced industry professionals and are regularly updated to reflect the latest changes in the Building Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam content.
| Section | Objectives |
|---|---|
| Integration | - Explain and configure MDM integration - Configure and use FortiNAC-F Manager - Integrate with third-party devices using Syslog and SNMP trap input |
| Deployment and Provisioning | - Configure and monitor high availability (HA) - Configure security automation - Configure access control on FortiNAC-F - Configure FortiNAC-F security policies |
| Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
| Network Visibility and Monitoring | - Troubleshoot network devices and device status - Explain and configure device profiling - Guests and contractors - Use logging options available on FortiNAC |
>> NSE6_FNC_AD-7.6 Real Brain Dumps <<
First and foremost, we have high class operation system so we can assure you that you can start to prepare for the NSE6_FNC_AD-7.6 exam with our study materials only 5 to 10 minutes after payment. Fortunately, you need not to worry about this sort of question any more, since you can find the best solution in this website--our NSE6_FNC_AD-7.6 Training Materials. With our continued investment in technology, people and facilities, the future of our company has never looked so bright. There are so many advantages of our NSE6_FNC_AD-7.6 practice test and I would like to give you a brief introduction now.
NEW QUESTION # 14
An administrator is configuring FortiNAC-F to manage FortiGate VPN users. As part of the configuration, the administrator must configure a few FortiGate firewall policies.
What is the purpose of the FortiGate firewall policy that applies to clients not yet authorized by FortiNAC-F?
Answer: A
Explanation:
The firewall policy for clients not yet authorized by FortiNAC-F is designed to restrict their access so they can communicate only with the FortiNAC-F VPN interface. This allows FortiNAC-F to perform authentication and authorization before granting broader network access.
NEW QUESTION # 15
During the testing of a newly modeled infrastructure switch, the administrator is not seeing hosts as they connect or move from one port to another. What would cause this issue?
Answer: B
Explanation:
The correct answer is A . When FortiNAC-F needs near real-time Layer 2 visibility, it relies on link traps, MAC notification traps, RADIUS, or scheduled/manual Layer 2 polling. The study guide explains that MAC notification traps contain the MAC address learned or removed from the switch MAC address table and the associated port, allowing FortiNAC-F to update its database when hosts connect, disconnect, or move. It also states that MAC notification traps are the preferred method for learning and updating Layer 2 information.
If a newly modeled switch does not show hosts as they connect or move between ports, the likely problem is that MAC notification traps are not correctly configured or not reaching FortiNAC-F . Layer 3 polling failure would affect IP-to-MAC correlation, not the ability to learn which switch port a MAC address is connected to. Disabled scheduled polling could delay updates, but it would not be the best explanation when the expected behavior is immediate host detection during connection or movement testing. Contact polling only checks whether the device is reachable; it does not collect host MAC-to-port visibility.
NEW QUESTION # 16
Refer to the exhibits. What would happen if the highlighted port with connected hosts was placed in both the Forced Registration and Forced Remediation port groups?
Answer: B
Explanation:
In FortiNAC-F, Port Groups are used to apply specific enforcement behaviors to switch ports.
When a port is assigned to an enforcement group, such as Forced Registration or Forced Remediation, FortiNAC-F overrides normal policy logic to force all connected adapters into that specific state. The exhibit shows a port (IF#13) with "Multiple Hosts" connected, which is a common scenario in environments using unmanaged switches or hubs downstream from a managed switch port.
According to the FortiNAC-F Administrator Guide, it is possible for a single port to be a member of multiple port groups. However, when those groups have conflicting enforcement actions--such as one group forcing a registration state and another forcing a remediation state--FortiNAC-F utilizes a ranking system to resolve the conflict. In the FortiNAC-F GUI under Network > Port Management > Port Groups, each group is assigned a rank. The system evaluates these ranks, and only the higher ranked enforcement group is applied to the port. If a port is in both a Forced Registration group and a Forced Remediation group, the group with the numerical priority (rank) will dictate the VLAN and access level assigned to all hosts on that port.
This mechanism ensures consistent behavior across the fabric. If the ranking determines that
"Forced Registration" is higher priority, then even a known host that is failing a compliance scan (which would normally trigger Remediation) will be held in the Registration VLAN because the port-level enforcement takes precedence based on its rank.
"A port can be a member of multiple groups. If more than one group has an enforcement assigned, the group with the highest rank (lowest numerical value) is used to determine the enforcement for the port. When a port is placed in a group with an enforcement, that enforcement is applied to all hosts connected to that port, regardless of the host's current state."
NEW QUESTION # 17
Which two actions must the administrator perform to allow FortiNAC-F to process incoming syslog messages from an unknown vendor? (Choose two answers)
Answer: A,D
Explanation:
FortiNAC-F requires both source-device recognition and a parser capable of interpreting the vendor- specific syslog structure .
First, the sending device must be modeled in Network > Inventory using the IP address that FortiNAC-F will see as the source of the messages. The FortiNAC-F 7.6 Administrator Study Guide explicitly states that a security device sending alerts must be modeled in Inventory using the source IP address. This prevents FortiNAC-F from accepting arbitrary syslog/security-event traffic from unrecognized sources.
Second, because the vendor is unknown or unsupported, the administrator must create a custom Security Event Parser under System > Settings > System Communication > Security Event Parsers . The guide states that adding a new parser enables support for virtually any device producing CSV, CEF, or Tag/Value- formatted syslog .
After modeling the device, its Incoming Events setting is associated with the appropriate parser.
Option A is unrelated to security-device integration. Option C is incorrect because Log Receivers define external destinations that receive FortiNAC-F-generated logs; they do not configure inbound syslog processing.
Study Guide Reference: Security Device Integration and Automated Response - Integration Using Syslog Messages; Security Event Parsers , pp. 316-318, 338-339 .
NEW QUESTION # 18
Two FortiNAC-F devices have been configured as a 1 + 1 HA pair. The primary server went offline and a successful failover to the secondary has occurred. What happens if the primary server comes back online?
Answer: D
Explanation:
The correct answer is A . In a FortiNAC-F 1+1 HA deployment, failover from primary to secondary is automatic, but failback to the primary is not automatic . The study guide states that if the primary device or its network connectivity fails, the secondary assumes control automatically, but restoration of a failed-over HA deployment is a manual administrator-driven process. It further explains that after the cause of the failover is resolved, the administrator must use the Resume Control button to transfer control back to the primary server.
That means when the primary comes back online, it does not immediately take over again. The pair can resume HA communication, but the secondary remains the in-control node until an administrator deliberately returns control to the primary. Option B is wrong because FortiNAC-F 1+1 HA is active-passive, not load- balanced. Option C is wrong because the restored primary does not power itself down for maintenance.
Option D is a trap: five failed heartbeats are used in failure detection and gateway validation logic, not as an automatic failback timer. The exam point is simple: automatic failover, manual failback .
NEW QUESTION # 19
......
Just download the Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) PDF dumps file and start the Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam questions preparation right now. Whereas the other two Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) practice test software is concerned, both are the mock Fortinet NSE6_FNC_AD-7.6 Exam Dumps and help you to provide the real-time Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam environment for preparation.
NSE6_FNC_AD-7.6 Latest Test Online: https://www.examprepaway.com/Fortinet/braindumps.NSE6_FNC_AD-7.6.ete.file.html