Vce JN0-351 File | JN0-351 Test Tutorials

BTW, DOWNLOAD part of TestKingFree JN0-351 dumps from Cloud Storage: https://drive.google.com/open?id=1l6B1bHV69J-55KBx5YZuMosLl6yGWXZI

Our JN0-351 study prep is classified as three versions up to now. All these versions of our JN0-351 exam braindumps are popular and priced cheap with high quality and accuracy rate. They achieved academic maturity so that their quality far beyond other practice materials in the market with high effectiveness and more than 98 percent of former candidates who chose our JN0-351 Practice Engine win the exam with their dream certificate.

Juniper JN0-351 Exam Syllabus Topics:

Topic	Details
Topic 1	Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
Topic 2	Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.
Topic 3	IS-IS: Aspiring Juniper networking professionals enhance their understanding of IS-IS routing protocols. This topic equips candidates with the knowledge to configure and monitor IS-IS systems, addressing specific exam challenges and practical applications.
Topic 4	Spanning Tree: Networking professionals explore the principles and advantages of the Spanning Tree Protocol (STP) to ensure loop-free topologies in Layer 2 networks.
Topic 5	Layer 2 Security: This topic introduces Layer 2 protection mechanisms and firewall filters to fortify network security. Practical skills in configuring, monitoring, and troubleshooting these features prepare candidates to address exam objectives and real-world challenges effectively.
Topic 6	BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.
Topic 7	OSPF: The concepts and operational details of OSPF are explored, providing tools for routing efficiency. Configuration and troubleshooting mastery ensure readiness for both the exam and complex enterprise environments.

>> Vce JN0-351 File <<

Juniper JN0-351 Test Tutorials | Preparation JN0-351 Store

Now, you should do need to get the exam question sets from year to year and reference materials that is related to Juniper JN0-351 certification exam. Busying at work, you must not have enough time to prepare for your exam. So, it is very necessary for you to choose a high efficient reference material. What's more important, you should select a tool that suits you, which is a problem that is related to whether you can pass your exam successfully. Therefore, try TestKingFree Juniper JN0-351 Practice Test dumps.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q176-Q181):

NEW QUESTION # 176
You need to configure a LAG between your switches. In this scenario, which two statements are correct?
(Choose two.)

A. Member links are not required to be contiguous ports.
B. Duplex and speed settings are not required to match on both participating devices.
C. Duplex and speed settings are required to match on both participating devices.
D. Member links are required to be contiguous ports.

Answer: A,C

Explanation:
B is correct because duplex and speed settings are required to match on both participating devices. According to the Juniper Networks documentation1, all the interfaces in a LAG must have the same speed and be in full-duplex mode. This ensures that the LAG can operate as a single logical link without any performance or compatibility issues.
C is correct because member links are not required to be contiguous ports. According to the Juniper Networks documentation2, you can group any Ethernet interfaces on a switch into a LAG, regardless of their physical location or slot number. This provides flexibility and scalability for configuring LAGs on switches.

NEW QUESTION # 177
Refer to the exhibit.

Referring to the output shown in the exhibit, which statement is correct?

A. The state is normal for a DRother neighbor
B. An MTU mismatch exists between the OSPF neighbors.
C. An area ID mismatch exists between the OSPF neighbors
D. The state is normal for a DR neighbor.

Answer: A

Explanation:
In OSPF, the state of the neighbor relationship is determined by the exchange of OSPF packets between routers 1 . The state "2Way" as shown in the exhibit indicates that bi-directional communication has been established between the two OSPF routers 1 . This is the normal state for a neighbor that is not the Designated Router (DR) or Backup Designated Router (BDR) on a broadcast, non-broadcast multi-access (NBMA), or point-to-multipoint network 1 . These neighbors are often referred to as " DRothers " 1 .
Therefore, option B is correct.

NEW QUESTION # 178
Exhibit

Which command displays the output shown in the exhibit?

A. show ethernet-switching table
B. show ethernet-switching table extensive
C. show route forwarding-table
D. show route forwarding-table family ethernet-switching

Answer: A

Explanation:
The output shown in the exhibit is a brief display of the Ethernet switching table, which shows the learned Layer 2 MAC addresses for each VLAN and interface1.
The command show ethernet-switching table displays the Ethernet switching table with brief information, such as the destination MAC address, the VLAN name, the forwarding state, and the interface name1.
The command show route forwarding-table displays the routing table information for each protocol family, such as inet, inet6, mpls, iso, and so on2. It does not show the Ethernet switching table or the MAC addresses.
The command show ethernet-switching table extensive displays the Ethernet switching table with extensive information, such as the destination MAC address, the VLAN name, the forwarding state, the interface name, the VLAN index, and the tag type1. It shows more details than the brief output shown in the exhibit.
The command show route forwarding-table family ethernet-switching displays the routing table information for the ethernet-switching protocol family, whichshows the destination MAC address, the next-hop MAC address, and the interface name3. It does not show the VLAN name or the forwarding state.

NEW QUESTION # 179
Which statement about aggregate routes is correct?

A. Aggregate routes can only be used for static routing but not for dynamic routing protocols.
B. Aggregate routes are always preferred over more specific routes, even when the specific routes have a better path.
C. Aggregate routes are automatically generated for all of the subnets in a routing table.
D. Aggregate routes are used for advertising summarized network prefixes.

Answer: D

Explanation:
Explanation
Aggregate routes are used for advertising summarized network prefixes12. They help minimize the number of routing tables in an IP network by consolidating selected multiple routes into a single route advertisement1. This approach is in contrast to non-aggregation routing, in which every routing table contains a unique entry for each route1.
Therefore, option D is correct. Options A, B, and C are not correct because:
Aggregate routes can be used with both static routing and dynamic routing protocols1.
Aggregate routes are not automatically generated for all of the subnets in a routing table. They need to be manually configured1.
Aggregate routes are not always preferred over more specific routes. The route selection process in Junos OS considers several factors, including route preference and metric, before determining the active route1.

NEW QUESTION # 180
Which two types of tunnels are able to be created on all Junos devices? (Choose two.)

A. STP
B. GRE
C. IP-IP
D. IPsec

Answer: B,D

Explanation:
Explanation
Junos devices support various types of tunnels for different purposes12.
Option B is correct. Generic Routing Encapsulation (GRE) is a tunneling protocol that can encapsulate a wide variety of network layer protocols inside virtual point-to-point links over an Internet Protocol network1. Junos devices support GRE tunnels1.
Option D is correct. IPsec (Internet Protocol Security) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session1. Junos devices support IPsec tunnels1.
Option A is incorrect. Spanning Tree Protocol (STP) is not a type of tunnel. It's a network protocol designed to prevent loops in a bridged Ethernet local area network2.
Option C is incorrect. While Junos devices do support IP-IP (also known as IP tunneling), it's not supported on all Junos devices1.

NEW QUESTION # 181
......

As the leader in the market for over ten years, our Juniper JN0-351 practice engine owns a lot of the advantages. Our JN0-351 study guide is featured less time input, high passing rate, three versions, reasonable price, excellent service and so on. All your worries can be wiped out because our Juniper JN0-351 learning quiz is designed for you. We hope that that you can try our free trials before making decisions.

JN0-351 Test Tutorials: https://www.testkingfree.com/Juniper/JN0-351-practice-exam-dumps.html

P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by TestKingFree: https://drive.google.com/open?id=1l6B1bHV69J-55KBx5YZuMosLl6yGWXZI