Having more competitive advantage means that you will have more opportunities and have a job that will satisfy you. This is why more and more people have long been eager for the certification of NSEI_OTS_AR-7.6. There is no doubt that obtaining this NSEI_OTS_AR-7.6 certification is recognition of their ability so that they can find a better job and gain the social status that they want. Most people are worried that it is not easy to obtain the certification of NSEI_OTS_AR-7.6, so they dare not choose to start. We are willing to appease your troubles and comfort you. We are convinced that our NSEI_OTS_AR-7.6 test material can help you solve your problems. Compared to other learning materials, our products are of higher quality and can give you access to the NSEI_OTS_AR-7.6 certification that you have always dreamed of. Now let me introduce our NSEI_OTS_AR-7.6 test questions for you. I will show you our study materials.
| Section | Objectives |
|---|---|
| Monitoring and Risk Assessment | - Perform risk assessment and management - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer |
| Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
| Network Security | - Configure automation - Configure security inspections for industrial protocols - Configure virtual patching |
| Network Access Control | - Configure network segmentation schemas - Configure network access authentication - Explain OT Ethernet concepts |
>> Fortinet NSEI_OTS_AR-7.6 Testdump <<
Our company has dedicated ourselves to develop the NSEI_OTS_AR-7.6 latest practice materials for all candidates to pass the exam easier, also has made great achievement after more than ten years' development. As the certification has been of great value, a right NSEI_OTS_AR-7.6 exam guide can be your strong forward momentum to help you pass the NSEI_OTS_AR-7.6 Exam like a hot knife through butter. And our NSEI_OTS_AR-7.6 exam questions are exactly the right one for you as our high quality of NSEI_OTS_AR-7.6 learning guide is proved by the high pass rate of more than 98%.
NEW QUESTION # 44
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 45
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: A
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 46
What are two advantages provided by industrial Ethernet? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are B. Real-time control and D. Determinism . The study guide defines industrial Ethernet as the "use of Ethernet and TCP/IP as transport mechanisms for industrial protocols" and states that it provides "real-time control," "low latency," and "determinism (meaning reliable and predictable data delivery)" in harsh environments. It further explains that industrial Ethernet "provides deterministic communication between machine controllers, actuators, sensors, and other units." These statements directly confirm that the two key advantages are real-time control and determinism.
The other options are not supported by the study guide as core advantages of industrial Ethernet. Encryption is not listed as one of the benefits in this section, and remote access is discussed elsewhere in the OT architecture but not as a defining advantage of industrial Ethernet itself. The guide is explicit that the main benefits here are predictable delivery and real-time communication, which are essential in industrial control environments where timing and reliability matter.
NEW QUESTION # 47
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
NEW QUESTION # 48
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 49
......
Don't let the NSEI_OTS_AR-7.6 exam stress you out! Prepare with Fortinet NSEI_OTS_AR-7.6 exam dumps and boost your confidence in the real Fortinet NSEI_OTS_AR-7.6 exam. We ensure your road towards success without any mark of failure. Time is of the essence - don't wait to ace your Fortinet NSEI_OTS_AR-7.6 Certification Exam!
NSEI_OTS_AR-7.6 Test Review: https://www.examstorrent.com/NSEI_OTS_AR-7.6-exam-dumps-torrent.html