During the operation of the NSEI_OTS_AR-7.6 study materials on your computers, the running systems of the NSEI_OTS_AR-7.6 study guide will be flexible, which saves you a lot of troubles and help you concentrate on study. If you try on it, you will find that the operation systems of the NSEI_OTS_AR-7.6 Exam Questions we design have strong compatibility. So the running totally has no problem. And you can free download the demos of the NSEI_OTS_AR-7.6 practice engine to have a experience before payment.
| Section | Objectives |
|---|---|
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Perform risk assessment and management - Create FortiAnalyzer event handlers |
| Network Access Control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Asset Management | - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance |
| Network Security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
>> Certified NSEI_OTS_AR-7.6 Questions <<
Are you planning to attempt the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam of the NSEI_OTS_AR-7.6 certification? The first hurdle you face while preparing for the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) exam is not finding the trusted brand of accurate and updated NSEI_OTS_AR-7.6 exam questions. If you don't want to face this issue then you are at the trusted ExamTorrent is offering actual and Latest NSEI_OTS_AR-7.6 Exam Questions that ensure your success in the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) certification exam on your maiden attempt.
NEW QUESTION # 19
How are rogue devices evaluated in FortiNAC? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Through device profiling rules . The study guide states: "When a rogue device record is created, the device is evaluated against the enabled device profiling rules." It further explains that "FortiNAC evaluates a device against each rule until a failed, passed, or cannot evaluate result is reached." That is the direct evaluation mechanism used for rogue devices in FortiNAC.
The guide also adds that "Device profiling rules are used to evaluate and classify rogue devices" and that FortiNAC applies rule methods and classification settings to determine whether the device matches a known type. This is why the other options are incorrect: FortiGuard server queries and the local device database (CIDB) relate to FortiGate device detection workflows, not FortiNAC rogue-device evaluation, and importing a devices list is not the evaluation method described for rogue devices.
NEW QUESTION # 20
Refer to the exhibit.
The OT devices behind the ruggedized FortiGate have vulnerabilities and you want to apply a virtual patching profile in the firewall policy. Why is Virtual Patching not available in the Security Profiles section? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. You must enable Virtual Patching in the Feature Visibility section .
The study guide states clearly that "By default, virtual patching profiles are hidden on the GUI, and you must enable them through System > Feature Visibility." That exactly matches the situation in the exhibit, where Virtual Patching does not appear under Security Profiles . So the issue is not that the feature is unsupported, but that it is simply hidden in the GUI until it is enabled.
The other options do not answer the question being asked. A valid OT security service license is required for virtual patching signatures and protection workflow, and OT signatures are relevant to IPS-based OT protection, but those do not explain why the menu item itself is missing from the Security Profiles section .
The guide specifically identifies Feature Visibility as the reason the Virtual Patching profile is not shown in the GUI. Therefore, the required action is to enable Virtual Patching in System > Feature Visibility .
NEW QUESTION # 21
Refer to the exhibit.
The configuration of firewall policies is shown.
To improve the security of your OT network, you have configured authentication in the firewall policies as shown in the exhibit, with CLI parameters set to their default settings. However, when you test HTTPS access from the LAN subnet to PLC-1, it is successful without any authentication prompt.
What is the reason?
Answer: A
Explanation:
The correct answer is A . Policy ID 8 contains the Supervisors user group, so authentication is required for traffic matching that policy. However, policy ID 9 permits traffic to PLC-1 without a user or user-group authentication requirement. Fortinet explains that when an authentication policy is followed by a fall-through policy that does not require authentication , traffic can match the fall-through policy and proceed without generating a login prompt. This is particularly relevant because the default CLI setting is auth-on-demand implicitly. Under the default implicitly behavior, FortiGate does not trigger active authentication when a matching unauthenticated fall-through policy exists. Setting auth-on-demand always, or requiring authentication on all potentially matching policies, changes that behavior. Therefore, HTTPS succeeds without prompting because authentication was not configured on firewall policy ID 9 .
NEW QUESTION # 22
Refer to the exhibits.
A partial Incident Analysis page and the log details related to the event are shown. An attack is reported on your OT network. You analyze the corresponding incident. Based on the information provided on the Incident Analysis page and the log details, which two statements are correct? (Choose two answers)
Answer: C,E
Explanation:
Based on the technical data provided in the exhibits and the OT Security 7.6 Architect curriculum:
* Industrial Protocol Identification (Statement A) : The log details exhibit clearly shows that the Destination Port used in the attack is 502 . According to the study guide ' s section on Industrial Protocol Protection , the standard port used by the Modbus TCP protocol is 502 . Furthermore, the attack name identifies a " Triangle.Research.Nano-10.PLC, " which are industrial controllers commonly utilizing Modbus for communications.
* Attack Mitigation (Statement B) : The log details specify that the Action taken by the FortiGate (Edge-FortiGate) was dropped . In cybersecurity and Fortinet fabric operations, dropping a packet associated with an IPS signature means the traffic was blocked from reaching its target, thereby mitigating the attack.
* Target IP Address (Statement E) : The log detail explicitly lists the Destination IP as 192.168.2.3 .
The Incident Analysis page also titles the incident with dstip:192.168.2.3. While the " Affected Endpoint " is shown as 10.1.5.20 , in an " outgoing " attack direction (as shown in the log), this likely refers to the internal source/attacker IP, whereas the target is the destination IP (192.168.2.3). Thus, Statement E is incorrect.
* Protocol Conflict (Statement C) : The IEC 104 protocol typically utilizes port 2404 . Since the log specifies port 502, Statement C is incorrect.
* Severity Distinction (Statement D) : While the Incident severity is marked as High , the question specifically asks about event severity. The " Events " table at the bottom of the Incident Analysis page shows a " User login/logout failed " event with a medium severity. Because there is a distinction in the management console between the severity of individual events and the aggregated incident, and Statement A and B are technically definitive based on port and action, A and B are the correct architectural choices.
NEW QUESTION # 23
What are two advantages provided by industrial Ethernet? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B. Real-time control and D. Determinism . The study guide defines industrial Ethernet as the "use of Ethernet and TCP/IP as transport mechanisms for industrial protocols" and states that it provides "real-time control," "low latency," and "determinism (meaning reliable and predictable data delivery)" in harsh environments. It further explains that industrial Ethernet "provides deterministic communication between machine controllers, actuators, sensors, and other units." These statements directly confirm that the two key advantages are real-time control and determinism.
The other options are not supported by the study guide as core advantages of industrial Ethernet. Encryption is not listed as one of the benefits in this section, and remote access is discussed elsewhere in the OT architecture but not as a defining advantage of industrial Ethernet itself. The guide is explicit that the main benefits here are predictable delivery and real-time communication, which are essential in industrial control environments where timing and reliability matter.
NEW QUESTION # 24
......
Our NSEI_OTS_AR-7.6 exam questions are supposed to help you pass the exam smoothly. Don't worry about channels to the best NSEI_OTS_AR-7.6 study materials so many exam candidates admire our generosity of offering help for them. Up to now, no one has ever challenged our leading position of this area. The existence of our NSEI_OTS_AR-7.6 learning guide is regarded as in favor of your efficiency of passing the exam.
NSEI_OTS_AR-7.6 Premium Exam: https://www.examtorrent.com/NSEI_OTS_AR-7.6-valid-vce-dumps.html