350-501 Test Centres, Valid 350-501 Exam Fee

BTW, DOWNLOAD part of It-Tests 350-501 dumps from Cloud Storage: https://drive.google.com/open?id=1FQemkbfXhMl5k7zDDQnUlVMJEKJaH3jy

The Cisco 350-501 desktop exam simulation software works only on Windows but the web-based 350-501 practice test is compatible with all operating systems and browsers. This is also an effective format for 350-501 Test Preparation. The 350-501 PDF dumps is an easily downloadable and printable file that carries the most probable Cisco 350-501 actual questions.

Cisco 350-501 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Automation and Programmability	15%	- Network automation fundamentals 1. REST APIs and NETCONF/RESTCONF 2. YANG data models - Automation tools 1. Python-based network automation 2. Cisco NSO concepts
Topic 2: Security	15%	- VPN security 1. IPsec fundamentals 2. Secure routing practices - Service provider security 1. Infrastructure security mechanisms 2. Control plane protection
Topic 3: Architecture	20%	- Network design principles 1. Hierarchical network design 2. Scalability and high availability concepts - Service provider network architecture concepts 1. Core, edge, and access network design 2. IP/MPLS architecture fundamentals
Topic 4: Services	20%	- Subscriber services 1. PPPoE and DHCP services 2. Carrier Ethernet services - Service provisioning 1. Traffic engineering services 2. VPN service deployment
Topic 5: Networking	45%	- Infrastructure services 1. Multicast in service provider networks 2. QoS mechanisms - Routing protocols 1. IS-IS and OSPF optimization 2. BGP in service provider environments - MPLS and VPN technologies 1. LDP and RSVP-TE 2. L3VPN and L2VPN services

>> 350-501 Test Centres <<

Pass Guaranteed 2026 High-quality Cisco 350-501 Test Centres

Our 350-501 exam dumps provide you the best learning opportunity with employing minimum efforts while the results are pleasantly surprising beyond your expectations. The quality of our 350-501 praparation materials is outstanding and famous. We can claim that if you study with our 350-501 learning guide for 20 to 30 hours, then you are bound to pass the exam with confidence. Meanwhile, you will enjoy the study expecience for there are three different versions to choose from.

Cisco Implementing and Operating Cisco Service Provider Network Core Technologies Sample Questions (Q103-Q108):

NEW QUESTION # 103
Which action occurs during the traceback phase of the six-phase approach to service provider security?

A. Trace action occur flows from the stacked sections of the network toward the network edges
B. Mitigate the attack that flows using various mechanisms.
C. Review the whole attack-handling process
D. Detect unusual activity or behavior and activate appropriate measures after an alert is raised.

Answer: A

NEW QUESTION # 104
Refer to the exhibit:

An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?

A. Router 1 and Router 2 advertise the route to 192.0.2.0/24 to all BGFD peers.
B. All traffic to 192.168.1.0/24 is dropped
C. All traffic is dropped
D. Router 1 drops all traffic with a local-preference set to 150

Answer: D

Explanation:
The configuration shown indicates that Router 1 is set up with a route-map named "ddos" that matches traffic tagged with "tag 1". The traffic matching this tag is then set to have a next-hop IP of 192.0.2.1 and a local preference of 150. The community is also set to "no export", which means this route will not be advertised to external BGP peers. Since there's no explicit deny statement in the configuration, only traffic with tag 1 and local preference of 150 will be dropped by Router 1 as per the BGP routing policy. Reference: Implementing and Operating Cisco Service Provider Network Core Technologies course materials.

NEW QUESTION # 105
Refer to the exhibit. A network engineer is configuring router RB to secure BGP advertisements against route hijacking activity. RB must validate all prefixes that it receives from origin AS 200 before installing them in the BGP route table. Which configuration meets the requirement?

A. RB(config-bgp)# router bgp 100
RB(config-bgp)# bgp origin-as validation time off
B. RB(config)# router bgp 100
RB(config-router)# address-family ipv4 unicast
PB(config-router-af)# bgp origin-as validation enable
C. RB(config-bgp)# router bgp 100
RB(config-bgp)# bgp origin-as validation signal ibgp
RB(config-bgp)# bgp bestpath origin-as allow invalid
D. RB(config)# router bgp 100
RB(config-router)# address-family ipv4 unicast
RB(config-router-af)# bgp bestpath origin-as use validity

Answer: D

NEW QUESTION # 106
The administrator of a small company network notices that intermittent network issues occasionally cause inbound notifications to its SNMP servers to be lost. Which configuration must the administrator apply so that the SNMP servers acknowledge the notifications that they receive?

A. snmp-server enable traps bgp
snmp-server host 192.169.2.1 Informs
B. snmp-server community ciscotest rw 10
C. snmp-server host tests.cisco.com public
snmp-server community ciscotest rw 10
D. snmp-server enable traps snmp

Answer: A

Explanation:
The correct configuration to ensure that SNMP servers acknowledge the notifications they receive is to use the snmp-server host command with the Informs keyword. This configuration sends Inform requests instead of Trap messages. Unlike Traps, Inform requests are acknowledged by the receiving SNMP server, ensuring that the notification has been received. If an Inform request is not acknowledged, the SNMP agent resends the notification.
The information is based on the Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) training, which teaches how to configure, verify, troubleshoot, and optimize next- generation, Service Provider IP network infrastructures.

NEW QUESTION # 107
Refer to the exhibit.

Refer to the exhibit. An Ethernet access provider is configuring routers PE-1 and PE-2 to provide E-Access EVPL service between UNI and ENNI. ENNI service multiplexing is based on 802.1ad tag 150, and service-multiplexed UNI is based on 802.1q tag 10. Which EFP configurations must the provider implement on PE-1 and PE-2 to establish end-to-end connectivity between CE-1 and CE-2?

A. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10
B. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10
C. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1q 150
rewrite ingress tag pop 1 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10
D. On PE-1:
interface GigabitEthernet2
service instance 100 ethernet
encapsulation dot1ad 150 dot1q 10
rewrite ingress tag pop 2 symmetric
On PE-2:
interface GigabitEthernet2
service instance 2 ethernet
encapsulation dot1q 10

Answer: D

Explanation:
rewrite ingress tag pop 1 symmetric

NEW QUESTION # 108
......

From the time our company was just established until now, we have conducted multiple surveys of users. We also take every feedback from users very seriously. This is a very tedious job, but to better develop our 350-501 learning materials, our professional experts have been insisting on it! We hope to be responsible for every user of our 350-501 Exam Braindumps. Your praise is the driving force of our350-501 practice questions!

Valid 350-501 Exam Fee: https://www.it-tests.com/350-501.html

P.S. Free 2026 Cisco 350-501 dumps are available on Google Drive shared by It-Tests: https://drive.google.com/open?id=1FQemkbfXhMl5k7zDDQnUlVMJEKJaH3jy