Pass4Test HPE7-A01 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1GN3VJeOjja9W0_uZST3s0uEL0g_zhWMR
우리Pass4Test 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리Pass4Test는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.HP HPE7-A01인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리Pass4Test 는 여러분이 100%HP HPE7-A01인증시험을 패스할 수 있다는 것을 보장합니다.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Routing | 13% | - Routing and Network Services
|
| Topic 2: WLAN | 17% | - Wireless LAN Technologies
|
| Topic 3: Network Resiliency and Device Virtualization | 8% | - Redundancy and High Availability
|
| Topic 4: Managing and Monitoring | 6% | - Network Operations
|
| Topic 5: Security | 9% | - Campus Security
|
| Topic 6: Performance Optimization | 7% | - Optimization Techniques
|
| Topic 7: Authentication and Authorization | 8% | - AAA Services
|
| Topic 8: Troubleshooting | 6% | - Fault Isolation and Diagnostics
|
| Topic 9: Network Stack | 4% | - Networking Fundamentals
|
| Topic 10: Connectivity | 8% | - Campus Connectivity Technologies
|
| Topic 11: Switching | 14% | - Layer 2 and Layer 3 Switching
|
Pass4Test에서는HP 인증HPE7-A01시험대비덤프를 발췌하여 제공해드립니다. HP 인증HPE7-A01시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. Pass4Test에서 제공해드리는 전면적인HP 인증HPE7-A01시험대비덤프로HP 인증HPE7-A01시험준비공부를 해보세요. 통과율이 100%입니다.
질문 # 59
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?
정답：D
설명：
Explanation
To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing. References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html
질문 # 60
With Aruba CX 6300. how do you configure ip address 10 10 10 1 for the interface in default state for interface 1/1/1?
정답：D
설명：
To configure an IP address for an interface in default state for interface 1/1/1 on Aruba CX 6300 switch, you need to disable switching on the interface first with the command no switching. Then you can assign an IP address with the command ip address. The other options are incorrect because they either do not disable switching or use invalid keywords such as switching or routing.
References:
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch01.html
https://www.arubanetworks.com/techdocs/AOS-CX_10_08/UG/bk01-ch02.html
질문 # 61
Refer to Exhibit:
With Access-1, What needs to be identically configured With MSTP to load-balance VLANS?
정답：D
설명：
The correct answer is B. Spanning-tree instance VLAN mapping.
To load-balance VLANs with MSTP, you need to configure the same VLAN-to-instance mapping on all switches in the same MST region. This means that you need to assign different VLANs to different MST instances, and then adjust the spanning tree parameters (such as priority, cost, or port role) for each instance to achieve the desired load balancing. For example, you can make one switch the root for instance 1 and another switch the root for instance 2, and then map half of the VLANs to instance 1 and the other half to instance 2.
According to the Cisco document Understand the Multiple Spanning Tree Protocol (802.1s), one of the steps to configure MST is:
* Split your set of VLANs into more instances and configure different MST settings for each of these instances. In order to easily achieve this, elect Bridge D1 to be the root for VLANs 501 through 1000, and Bridge D2 to be the root for VLANs 1 through 500. These statements are true for this configuration:
Switch D1(config)#spanning-tree mst configuration
Switch D1(config-mst)#instance 1 vlan 501-1000
Switch D1(config-mst)#exit
Switch D1(config)#spanning-tree mst 1 priority 0
Switch D2(config)#spanning-tree mst configuration
Switch D2(config-mst)#instance 2 vlan 1-500
Switch D2(config-mst)#exit
Switch D2(config)#spanning-tree mst 2 priority 0
The above commands create two MST instances, 1 and 2, and map VLANs 501-1000 to instance 1 and VLANs 1-500 to instance 2. Then, they make switch D1 the root for instance 1 and switch D2 the root for instance 2.
The other options are incorrect because:
* A. Spanning-tree bpdu-guard setting is a security feature that disables a port if it receives a BPDU from an unauthorized device. It does not affect load balancing with MSTP.
* C. Spanning-tree CIST mapping is not a valid command. CIST stands for Common and Internal Spanning Tree, which is the spanning tree instance that runs within an MST region and interacts with other regions or non-MST switches.
* D. Spanning-tree root-guard setting is another security feature that prevents a port from becoming a root port if it receives superior BPDUs from another switch. It does not affect load balancing with MSTP.
질문 # 62
Refer to Exhibit:
A company has deployed 200 AP-635 access points. To take advantage of the 6 GHz band, the administrator has attempted to configure a new WPA3-OWE SSID in Central but is not working as expected.
What would be the correct action to fix the issue?
정답：B
설명：
Explanation
The correct action to fix the issue is C. Change the SSID to WPA3-Enhanced Open.
WPA3-OWE is not a valid SSID type in Central. OWE stands for Opportunistic Wireless Encryption, and it is a feature that provides encryption for open networks without requiring authentication. OWE is also known as Enhanced Open, and it is one of the options for WPA3 SSIDs in Central1.
According to the Aruba document Configuring WLAN Settings for an SSID Profile, one of the steps to configure a WPA3 SSID is:
* Select the Security Level from the drop-down list. The following options are available:
* WPA3-Personal: This option uses Simultaneous Authentication of Equals (SAE) to provide stronger password-based authentication and key exchange than WPA2-Personal.
* WPA3-Enterprise: This option uses 192-bit cryptographic strength for authentication and encryption, as defined by the Commercial National Security Algorithm (CNSA) suite.
* WPA3-Enterprise (CCM): This option uses 128-bit cryptographic strength for authentication and
* encryption, as defined by the Counter with CBC-MAC (CCM) mode.
* WPA3-Enhanced Open: This option uses Opportunistic Wireless Encryption (OWE) to provide encryption for open networks without requiring authentication.
The other options are incorrect because:
* A. WPA3-Enterprise (CNSA) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.
* B. WPA3-Personal is a valid SSID type, but it requires a passphrase to join the network, which may not be suitable for the company's use case.
* D. WPA3-Enterprise (CCM) is a valid SSID type, but it requires 802.1X authentication with a RADIUS server, which may not be suitable for the company's use case.
질문 # 63
Due to a shipping error, five (5) HPE Aruba Networking AP-515s and one (1) CX 6300 were sent directly to your new branch office. You have configured a new group persona for the new branch office devices in HPE Aruba Networking Central, but you do not know their MAC address or serial numbers. The office manager is instructed via text message on their smartphone to onboard all the new hardware into Aruba Central.
What application must the office manager use on their phone to complete this task?
정답：D
설명：
Aruba Installer App is a mobile app that simplifies site installations and enables network connectivity for Aruba devices. The app allows the user to scan the barcode of the device and add it to the network using Aruba Central. The app also automates importing Aruba devices into Aruba NetEdit for intelligent configuration management and continuous conformance validation.
질문 # 64
......
많은 분들이 고난의도인 HP관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 HPE7-A01관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 HP시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 Aruba Certified Campus Access Professional Exam관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.
HPE7-A01인증시험: https://www.pass4test.net/HPE7-A01.html
그리고 Pass4Test HPE7-A01 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1GN3VJeOjja9W0_uZST3s0uEL0g_zhWMR