P.S. Free 2026 Fortinet NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by PrepPDF: https://drive.google.com/open?id=1VHGyPOwncbQbNUwqKM23ctYX-TQWG7FW
If you want to purchase reliable & professional exam NSEI_OTS_AR-7.6 study guide materials, you go to right website. We PrepPDF only provide you the latest version of professional actual test questions. We provide free-worry shopping experience for customers. Our high pass rate of NSEI_OTS_AR-7.6 Exam Questions is famous in this field so that we can grow faster and faster so many years and have so many old customers. Choosing our NSEI_OTS_AR-7.6 exam questions you don't need to spend too much time on preparing for your NSEI_OTS_AR-7.6 exam and thinking too much.
| Section | Objectives |
|---|---|
| Network Access Control | - Explain OT Ethernet concepts - Configure network access authentication - Configure network segmentation schemas |
| Network Security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Asset Management | - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
>> New NSEI_OTS_AR-7.6 Exam Questions <<
You can open the Fortinet PDF questions file from any location and go through actual NSEI_OTS_AR-7.6 exam questions without time restrictions. The Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 practice test is ideal for intensive preparation. You can attempt our Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 Practice Exam multiple times to review and enhance your test preparation. The real NSEI_OTS_AR-7.6 exam environment of desktop and web-based practice exams will help you counter Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 pass anxiety.
NEW QUESTION # 36
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are B and C . The study guide states that "You can use application control signatures to detect OT protocols" and that "Application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" . It also shows that a Modbus application control profile can be enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly supports B , because application control is the feature used to identify and monitor OT protocols on FortiGate.
The guide also explains under IPS that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI" using config ips global and set exclude-signatures none .
Once enabled, FortiGate can use those OT signatures for OT-aware inspection and protection. That supports C as the second required configuration. A is related to device discovery, not protocol identification, and D is focused on exploit and vulnerability detection rather than the first-step goal of identifying OT protocols.
NEW QUESTION # 37
You want to improve access control for your large OT network using passive authentication. What must you configure on FortiGate? (Choose one answer)
Answer: B
Explanation:
The correct answer is A. Fortinet Single-Sign On (FSSO) . The study guide states under Active and Passive Authentication that for passive authentication, "User does not receive a login prompt from FortiGate" ,
"Credentials are determined automatically" , and specifically "FSSO, RSSO, and NTLM can be used." It then explains that passive authentication occurs with the single sign-on method and explicitly identifies Fortinet SSO (FSSO) as one of those methods.
The guide also says: "For passive authentication, you can implement FSSO. FSSO allows users who have already authenticated on the network through another system to be transparently identified. After initial login to any system on the network, users can access allowed resources without being prompted for credentials." That is exactly what the question asks for: improving access control in a large OT network using passive authentication .
The other options do not match passive authentication. Local users are part of local authentication, two- factor authentication adds an extra security factor but still uses active authentication, and FortiAuthenticator as a remote server supports centralized authentication for mid-to-large networks, but by itself it is not the specific passive-authentication method being asked here. The study guide is explicit that the FortiGate configuration for passive authentication is FSSO .
NEW QUESTION # 38
Refer to the exhibit.
Why is the OT View tab not available in the Asset Identity Center section of the FortiGate-1 device? (Choose one answer)
Answer: B
Explanation:
The correct answer is A . The study guide states that "The OT view is not available by default. You must enable it in the Feature Visibility section of the GUI or using the CLI command shown on this slide" and shows config system settings # set gui-ot enable . It also says that "After you enable the feature, the Asset Identity Center contains an Asset Identity List tab and an OT View tab." This directly explains why the OT View tab is missing: the feature that enables the Purdue-style OT display has not been enabled yet.
The OT View is the view that displays devices in a Purdue diagram , and the Asset Identity List also shows the current Purdue level for each device. Because the answer options do not explicitly say enable OT View in Feature Visibility , option A is the intended match, since it refers to enabling the Purdue-related OT display feature. Option B is incorrect because device detection affects visibility of devices, not whether the OT View tab exists. Option C is not supported by the study guide, and option D is also not given as the requirement for showing the OT View tab.
NEW QUESTION # 39
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: A,B
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 40
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: D
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 41
......
NSEI_OTS_AR-7.6 exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite NSEI_OTS_AR-7.6 Exam Prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.
Latest NSEI_OTS_AR-7.6 Questions: https://www.preppdf.com/Fortinet/NSEI_OTS_AR-7.6-prepaway-exam-dumps.html
P.S. Free & New NSEI_OTS_AR-7.6 dumps are available on Google Drive shared by PrepPDF: https://drive.google.com/open?id=1VHGyPOwncbQbNUwqKM23ctYX-TQWG7FW