あなたがInternational Code Council M2試験に順調に合格できるのは我々の目標です。そして、あなたがM2試験に合格できるのは弊社が存在する意義です。だから、弊社は全力を尽くしてInternational Code Council M2試験資料を改善し、試験制度の変更に応じて更新します。あなたはM2試験資料の最新版の問題集を使用できるために、ご購入の一年間で無料の更新を提供します。
| Section | Weight | Objectives |
|---|---|---|
| Combustion Air | 8% | - Air supply and venting - Combustion air requirements - Confined spaces and equipment rooms |
| Heating, Cooling & Water Heaters | 18% | - Water heaters and storage tanks - Heat pumps and cooling equipment - Boilers and hydronic systems - Solar thermal systems - HVAC equipment installation and clearance |
| Duct Systems | 12% | - Dampers and access doors - Insulation and sealing - Duct construction and materials - Duct installation and supports |
| General Administration | 18% | - Plan review and documentation - Code authority and enforcement - Permits and inspections - Manufacturer's instructions and listings |
| Fuel Supply Systems | 10% | - Pressure regulation and overpressure protection - Piping testing and inspection - Fuel gas piping materials and installation - Gas appliances and connections |
| Exhaust & Ventilation Systems | 20% | - Ventilation rates and outdoor air requirements - Commercial kitchen exhaust systems - Hazardous and special exhaust systems - Makeup air systems |
| Chimneys & Vents | 14% | - Clearances and termination requirements - Vent systems and connections - Factory-built chimneys and vents - Chimney construction and materials |
>> International Code Council M2無料サンプル <<
Japancertが提供したInternational Code CouncilのM2トレーニング資料はもうあなたの目の前に来ましたから、選択すべき時間になりました。もちろんあなたも他の製品を選べますが、Japancertがあなたに無限大な恩恵をもたらせることを知るべきです。１００パーセントの成功率を保証できるのはJapancertしかないです。Japancertがあなたに美しい未来を差し上げ、将来あなたはJapancert領域でより広い道が行くことができ、情報技術の領域で効率的に仕事することもできます。
質問 # 15
Floor furnaces shall not be closer than _____ inches to the ground.
正解：A
解説：
The ICC mechanical code requires the lowest portion of a floor furnace to have not less than 6 inches (152 mm) clearance from grade level . Therefore, the correct choice is the option corresponding to 6 inches , which is C based on your answer set.
質問 # 16
Where located on a roof with a 5:12 slope, a level platform shall be provided along the access panel of the furnace at least _____ inches wide.
正解：B
解説：
For appliances on roofs, ICC access provisions require a level platform at the appliance. The platform must be not less than 30 inches in any dimension . For the choices provided, that makes 30 inches the correct answer, which is Option C .
質問 # 17
A cooling system with a condensate disposal system:
正解：B
解説：
The ICC mechanical code requires condensate disposal components to be of approved corrosion-resistant material , and the drain line shall not decrease in size from the drain pan connection to the place of disposal.
The code minimum size is 3/4 inch , so the 1/2-inch statement is incorrect, and the code is not limited to PVC only. Also, the slope requirement for horizontal drain piping is not less than 1/8 inch per foot , not 1/4 inch per foot. That makes Option A the only fully correct statement.
質問 # 18
The optional integral clearance reduction system is designed to meet which NFPA standard?
正解：B
解説：
Based on the specification sheet shown in the exhibit, the design features state that the optional integral clearance reduction system meets the requirements of NFPA 96 . Therefore, the correct answer is D .
質問 # 19
The minimum size for access openings for fire dampers shall be:
正解：D
解説：
The IMC requires access openings for fire dampers to be of a size that allows maintenance and resetting of the damper . The code does not set the answer as same-as-duct, half-diagonal, or a universal 12-inch by 12- inch opening. So Option C is correct.
質問 # 20
......
何でも上昇しているこの時代に、自分の制限を突破したくないのですか。給料を倍増させることも不可能ではないです。International Code CouncilのM2試験に合格したら、あなたは夢を実現することができます。Japancertはあなたの最高のトレーニング資料を提供して、１００パーセントの合格率を保証します。これは本当のことです。疑いなくすぐJapancertのInternational Code CouncilのM2試験トレーニング資料を購入しましょう。
M2参考書勉強: https://www.japancert.com/M2.html