Currently, if you want to make NS0-185 exam certification more tied to your status in the IT industry with fierce competition, and make professional competence stronger in the IT industry, you can choose our VerifiedDumps's NS0-185 Exam Training materials. With efforts for many years, the passing rate of VerifiedDumps's NS0-185 certification exam has reached as high as 100%. Choosing VerifiedDumps means to choose success.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: ONTAP Configuration | 20% | - Security hardening and access control - Troubleshooting and support tools - Cluster peering setup - Node addition and removal |
| Topic 2: ONTAP Switches | 15% | - Cluster switch software installation and configuration - Switched cluster cabling - Switch management and troubleshooting |
| Topic 3: Customer Handoff | 10% | - Documentation creation and handover - Installation validation and testing - Operational guidance and training |
| Topic 4: Basic Installation Topics and Tools | 17% | - Installation preparation and documentation
|
| Topic 5: ONTAP Concepts | 20% | - Storage efficiency features - ONTAP version updates and upgrades - Aggregate creation and cluster expansion - ONTAP cluster components and architecture |
| Topic 6: ONTAP Networking | 18% | - LIF creation and management - Network types and configurations - DNS, NTP and service configuration - Network redundancy and high availability |
In order to prevent your life from regret and remorse, you should seize every opportunity which can change lives passibly. Did you do it? VerifiedDumps's Network Appliance NS0-185 exam training materials can help you to achieve your success. We can help you pass the Network Appliance NS0-185 Exam smoothly. In order not to let success pass you by, do it quickly.
NEW QUESTION # 36
You attempt to create a data volume on aggr0 and receive a warning about severe performance or stability problems.
What is the reason for this warning?
Answer: C
Explanation:
The root aggregate hosts system volumes such as vol0. Adding data volumes can negatively impact system operations, causing performance and stability issues.
NEW QUESTION # 37
You are deploying a new AFF All SAN Array A250 into a customer's existing data fabric.
In this scenario, which two tools would give insight into their existing Cisco MDS fabric configuration?
(Choose two.)
Answer: A,C
Explanation:
The customer's environment uses aCisco MDSSAN fabric, so a Cisco-focused management/visibility tool is the most direct way to gain insight into the fabric's configuration, health, zoning state, and operational status.
Cisco Data Center Network Manager (DCNM)is a Cisco tool designed for managing Cisco SAN (including MDS) and therefore is the correct selection for Cisco fabric configuration insight.
From a NetApp installation and assessment perspective, the second tool that provides valuable insight- especially in the context of deploying NetApp storage into an existing fabric-isActive IQ Config Advisor.
Config Advisor is used to validate installation-related configuration and cabling and to detect configuration issues across the environment, including SAN connectivity/cabling checks from the NetApp side. While it is not a Cisco fabric manager, it is the NetApp tool used during installation and verification phases to identify configuration and connection problems that affect successful deployment into a SAN environment (for example, incorrect connectivity patterns or misconfigurations that would impact host/storage access).
Option A (Brocade SAN Health) is purpose-built for Brocade environments and does not match "Cisco MDS fabric configuration." Option C (Active IQ) focuses on NetApp system health, telemetry, and risks for NetApp arrays rather than providing direct insight into a Cisco MDS fabric configuration.
Therefore, the two tools that best satisfy "insight into their existing Cisco MDS fabric configuration" in the context of deploying NetApp SAN storage areB. Cisco DCNM(Cisco-side fabric visibility) andD. Active IQ Config Advisor(NetApp-side installation validation and connectivity/configuration checks relevant to the fabric integration).
NEW QUESTION # 38
You installed a new 4-node AFF A400 ONTAP 9.8 cluster. The AFF A400 controller data ports were automatically discovered byautomatic port placement.
In this scenario, which two ONTAP network settings were automatically configured? (Choose two.)
Answer: A,C
Explanation:
Within the ONTAP SAN implementation and configuration domain,automatic port placementis a key installation feature designed to simplify initial network setup during cluster deployment. In ONTAP 9.8, when controller data ports are discovered, ONTAP automatically analyzes physical port connectivity, speed, and role, and assigns those ports to appropriatebroadcast domainsandsubnets.
Broadcast domains define Layer 2 boundaries and group ports that share the same network reachability.
During installation, ONTAP automatically creates and assigns broadcast domains based on detected network topology and intended port usage. This behavior is explicitly described in NetApp installation objectives as part of reducing manual network configuration during initial setup.
Subnets are also automatically created and associated when automatic port placement is enabled. ONTAP uses subnets to manage pools of IP addresses for data LIF creation. By automatically configuring subnets, ONTAP enables rapid deployment of NAS and SAN data LIFs without requiring administrators to manually define IP address ranges during installation.
By contrast,routesare not automatically configured by automatic port placement. Routes must be explicitly defined by the administrator to control Layer 3 traffic flow between networks. Similarly,IPspacesare logical network containers that must be deliberately designed and created based on multi-tenancy or isolation requirements. IPspaces are never automatically created by ONTAP during installation because they have architectural implications that require administrator intent.
Therefore, the two ONTAP network settings that are automatically configured by automatic port placement are broadcast domainsandsubnets, makingC and Dthe correct answers.
NEW QUESTION # 39
You are preparing to physically install a new AFF A400 cluster into a customer's racks. All equipment has been delivered.
Which three tools do you need to complete this installation? (Choose three.)
Answer: A,C,E
Explanation:
Physical installation of an AFF system requires specific tools. APhillips #2 screwdriveris required for securing rails and components. Alaptop computeris needed for console access, initial configuration, and validation. Acable management trayis necessary to properly route and secure cables, ensuring airflow and serviceability.
Additional network cables and slide rail kits are equipment components, not tools.
Therefore, the correct answers areB, C, and E.
NEW QUESTION # 40
After installation, the customer requests training on system administration.
Which two responses are appropriate? (Choose two.)
Answer: A,D
NEW QUESTION # 41
......
We have chosen a large number of professionals to make NS0-185 learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from NS0-185 Exam Training professionals at any time. We can be sure that with the professional help of our NS0-185 test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose NS0-185 test guide to get you closer to success!
New NS0-185 Exam Answers: https://www.verifieddumps.com/NS0-185-valid-exam-braindumps.html