Three versions are available for H19-404_V1.0 study materials, and you can choose the most suitable one according to your own needs. H19-404_V1.0 PDF version is printable, and you can print them and take some notes on them if you want. H19-404_V1.0 Soft test engine can be used in more than 200 personal computers, and they support MS operating system. H19-404_V1.0 Online Test engine is convenient and easy to learn, and it supports all web browsers. You can have a general review of what you have learned. Just have a try, and there is always a version for you.
| Section | Objectives |
|---|---|
| Topic 1: Campus Network Fundamentals | - Typical campus network deployment models - Enterprise campus network architecture principles |
| Topic 2: WLAN Planning and Design | - Wireless coverage planning - Capacity and performance design considerations |
| Topic 3: Switching and Routing in Campus Networks | - Layer 2 and Layer 3 design principles - VLAN and segmentation design |
| Topic 4: Huawei Campus Network Solutions | - CloudCampus solution architecture - iMaster NCE-Campus management platform |
| Topic 5: Presales Solution Design | - Solution proposal and design methodology - Customer requirement analysis |
| Topic 6: Network Security Design | - Access control strategies - Campus security architecture considerations |
>> Testking H19-404_V1.0 Learning Materials <<
The Huawei H19-404_V1.0 certification is a valuable credential that plays a significant role in advancing the Huawei professional's career in the tech industry. With the HCSE-Presales-Campus Network Planning and Design V1.0 (H19-404_V1.0) certification exam you can demonstrate your skills and knowledge level and get solid proof of your expertise. You can use this proof to advance your career. The Huawei H19-404_V1.0 Certification Exam enables you to increase job opportunities, promotes professional development, and higher salary potential, and helps you to gain a competitive edge in your job search.
NEW QUESTION # 38
In hierarchical networking, which of the following devices is used for communication between different areas?
Answer: B
Explanation:
A border device, or more precisely a device at a border site, provides communication between different areas in a hierarchical SD-WAN topology. The hierarchical model divides a large WAN into multiple areas. Each area can independently use a hub-spoke or full-mesh topology, while selected border sites connect the local area to a centralized backbone area.
When a non-border site receives a route originating in another area, the route's next-hop site ID is changed to the border site in its own area. The local border device then forwards traffic toward the border site in the destination area or toward an interconnected hub site. Ordinary edge devices provide connectivity for their own sites but do not automatically perform cross-area transit.
Huawei describes border sites as members of both the level-2 area network and the level-1 backbone network.
These sites collectively implement interconnection between areas. Huawei further explains that inter-area routes point to border sites and recommends two border sites operating in active/standby mode for reliability.
Therefore, the correct answer is B.
NEW QUESTION # 39
Which 5G-Advanced capabilities does the AR5710-S8T1XWE-NRGL support?
Answer: A,B,C,D
Explanation:
The AR5710-S8T1XWE-NRGL supports all four listed 5G-Advanced capabilities. Support for 3GPP Release
16 enables enhanced 5G New Radio functions and provides the standards foundation for improved mobile- WAN capacity, reliability, and service performance.
Carrier aggregation combines multiple component carriers to increase available throughput. Downlink 3CC allows three component carriers to be aggregated for received traffic, while uplink 2CC combines two carriers for transmitted traffic. This is valuable for high-bandwidth branch access, video backhaul, and mobile private- network scenarios.
Support for eight APNs permits multiple logically separated mobile services or provider profiles to be configured. Different APNs can represent enterprise services, management traffic, production systems, backup connectivity, or isolated customer networks. Global-frequency-band support improves deployment flexibility across countries and carrier networks, subject to local spectrum regulation and the supported modem variant.
Huawei SD-WAN can use 5G as a primary, secondary, or bypass link and supports combinations such as dual
5G and 5G plus wired connectivity for service assurance. Therefore, NR Release 16, carrier aggregation, eight APNs, and global frequency bands are all supported.
NEW QUESTION # 40
Which of the following can be determined through a survey of the terminal types on a customer's network?
Answer: B
Explanation:
A terminal-type survey primarily determines the appropriate network admission control solution. Different terminal categories have different authentication capabilities and security requirements. Corporate laptops may support 802.1X authentication, guests may require Portal authentication, and printers, cameras, sensors, and other dumb terminals commonly require MAC-address authentication or automatic terminal identification.
Huawei recommends selecting authentication technologies according to the terminal type and usage scenario.
For example, access switches can serve as authentication points for wired dumb terminals, while APs or other access devices can perform authentication for wireless users. After terminal identification is enabled, iMaster NCE-Campus can automatically assign VLANs, ACLs, security groups, QoS parameters, and other authorization policies according to terminal category.
The survey therefore establishes which endpoints support interactive authentication, which require non- interactive admission, and which must receive special isolation or compliance policies. It does not independently determine the complete physical network architecture or the overall O & M platform.
Consequently, the terminal survey is used to formulate the network admission control solution, making option C correct.
NEW QUESTION # 41
Which of the following statements is false about GRE over IPsec?
Answer: D
Explanation:
Option B is false because it reverses the encapsulation behavior. In IPsec transport mode, the IPsec security header is inserted after the existing IP header; a new outer IP header is not normally added. In tunnel mode, the complete original IP packet is encapsulated and a new outer IP header is added. Tunnel mode therefore generally introduces greater overhead and produces a longer packet than transport mode, not the reverse.
The remaining statements are correct. IPsec supports both transport and tunnel modes. GRE over IPsec performs GRE encapsulation first, allowing GRE to transport the original payload, and then applies IPsec protection to the resulting GRE packet. The IPsec security association is established between the GRE tunnel endpoints, protecting the GRE-encapsulated traffic as it traverses an untrusted transport network.
Huawei SD-WAN data channels can use either GRE or GRE over IPsec. GRE provides flexible overlay encapsulation, while IPsec adds confidentiality, integrity, origin authentication, and anti-replay protection for site-to-site traffic. Huawei specifically identifies IPsec encryption as the mechanism securing site-to-site SD- WAN services.
NEW QUESTION # 42
In the energy-saving solution based on AI traffic prediction, IoT APs are recommended to operate in non- energy-saving mode by default.
Answer: B
Explanation:
The statement is true. AI-based energy-saving systems analyze historical traffic and usage patterns to predict periods of low network demand. Ordinary AP radios or access devices can then enter an energy-saving state when their capacity is not required, while surrounding devices maintain sufficient coverage and service availability.
IoT APs, however, may host continuously operating IoT cards, sensors, electronic shelf-label services, Bluetooth location functions, RFID services, healthcare devices, or asset-tracking terminals. Placing such an AP into an energy-saving or hibernation state could interrupt more than ordinary Wi-Fi connectivity. It could also disable an IoT module's power supply, management channel, data backhaul, or persistent sensing function. Huawei's Wi-Fi and IoT convergence architecture uses APs as shared locations, power sources, and communication channels for IoT services.
Huawei also applies intelligent technologies to analyze AP load trends and perform predictive network optimization. The safer default is therefore to exclude IoT APs from automatic energy-saving actions unless the administrator confirms that their attached IoT services tolerate interruption. Accordingly, the answer is True.
NEW QUESTION # 43
......
Our H19-404_V1.0 study material is the most popular examination question bank for candidates. H19-404_V1.0 study material has helped thousands of candidates successfully pass the exam and has been praised by all users since it was appearance. H19-404_V1.0 study material has the most authoritative test counseling platform, and each topic in H19-404_V1.0 Study Materials is carefully written by experts who are engaged in researching in the field of professional qualification exams all the year round. They have a very keen sense of change in the direction of the exam, so that they can accurately grasp the important points of the exam.
H19-404_V1.0 100% Correct Answers: https://www.trainingdump.com/Huawei/H19-404_V1.0-practice-exam-dumps.html