Jetzt ist die Juniper JN0-352 Zertifizierungsprüfung die beliebteste Zertifizierungsprüfung, an der viele IT-Fachleute beteiligen wollen. Dies ist ein Beweis für die IT-Fähigkeiten. Um die Prüfung zu bestehen sind umfangreiche Fachkenntnisse und Erfahrungen erfordert. Und das braucht doch viel Zeit. Vielleicht wählen Sie Ausbildungskurse oder Prüfungsmaterialien. Es ist eher kostengünstig, ein Ausbildungsinstitut von guter Qualität zu wählen. DeutschPrüfung ist eine Website, die die Bedürfnisse der IT-Fachleute zur Juniper JN0-352 Zertifizierungsprüfung abdecken können. Die Produkte von DeutschPrüfung sind ziegerichtete Ausbildung zur Juniper JN0-352 Zertifizierungsprüfung. Sie können in kurzer Zeit ihre IT-Fachkenntnisse ergänzen und sich gut auf die Juniper JN0-352 Zertifizierungsprüfung vorbereiten.
| Section | Weight | Objectives |
|---|---|---|
| Protocol Independent Routing | 10-15% | - Basic routing policy and filter operation - Routing tables, static routes and route preference - Routing instances and route selection criteria |
| Layer 2 Security | 10-15% | - DHCP snooping, Dynamic ARP Inspection and IP Source Guard - Port security, MAC limiting and storm control - Layer 2 firewall filters and security features |
| IP Multicast | 5-10% | - Multicast routing monitoring and troubleshooting - IGMP operation and configuration - PIM Dense Mode, Sparse Mode and RP mechanisms |
| OSPF | 15-20% | - Route summarization and redistribution - Configuration, verification and troubleshooting - Neighbor formation, area design and LSA types |
| BGP | 15-20% | - Neighbor relationships and session establishment - Route advertisement, attributes and path selection - Routing policies, filtering and common troubleshooting |
| IS-IS | 10-15% | - Adjacency establishment, levels and metrics - Scalable enterprise deployment and troubleshooting - Configuration and route exchange |
| High Availability and Resiliency | 5-10% | - Network resiliency design and troubleshooting - Redundancy protocols and failover mechanisms - Graceful restart and non-stop routing |
| Tunnels and Overlays | 5-10% | - Overlay network design and connectivity - GRE, IP-IP and dynamic tunnel configuration - Tunnel types, encapsulation and operation |
| Layer 2 Switching and VLANs | 15-20% | - VLAN concepts, configuration, trunking and tagging - Link Aggregation Groups (LAG) and Virtual Chassis - Spanning Tree Protocol (STP, RSTP, MSTP) operation and configuration |
Die Juniper JN0-352 Zertifizierungsprüfung sind jedem IT-Fachmann sehr wichtig. Solange Sie das JN0-352 Zertifikat bekommen, werden Sie im Beruf sicher nicht aussondert. Sie werden befördert und ein höheres Gehalt beziehen. Mit diesem Zertifikat können Sie alle bekommen, was Sie wünschen. Die Fragenpool zur Juniper JN0-352Zertifizierungsprüfung von DeutschPrüfung sind die Ressourcen zum Erfolg. Mit diesen Schulungsmaterialien werden Sie den Schritt zum Erfolg beschleunigen. Sie werden sicher mehr selbstbewusster.
158. Frage
You implemented the MAC address limit feature with the shutdown action on all interfaces on your switch.
In this scenario, which statement is correct when a violation occurs?
Antwort: A
Begründung:
When the MAC address limit feature with the shutdown action is implemented on a switch, if a violation occurs, the interface is disabled and a system log entry is generated. If the switch has been configured with the port-error-disable statement, the disabled interface recovers automatically upon expiration of the specified disable timeout. However, if the switch has not been configured for auto-recovery from port error disabled conditions, you must manually clear the violation by running the clear ethernet-switching port-error command for the interface to send and receive traffic again. This explanation is based on the Enterprise Routing and Switching Specialist (JNCIS-ENT) documents and learning resources available at Juniper Networks.
159. Frage
Referring to the exhibit, which two configuration changes must you apply for packets to reach from R1 to R3 using IS-IS? (Choose two.)
Antwort: C,D
Begründung:
A) On R1, enable Level 1 on the ge-0/0/1 interface. In IS-IS, both levels (Level 1 and Level 2) are enabled by default when you enable IS-IS on an interface1. Level 1 systems route within an area.
If the destination is outside an area, Level 1 systems route toward a Level 2 system. Therefore, enabling Level 1 on the ge-0/0/1 interface on R1 would allow packets to reach from R1 to R3.
D) On R3 enable Level 1 on the ge-0/0/4 interface Similarly, enabling Level 1 on the ge-0/0/4 interface on R3 would allow packets to reach from R1 to R3. These explanations are based on the IS-IS configuration documents and learning resources available at Juniper Networks1 and Cisco.
160. Frage
You are asked to configure a redundant trunk group (RTG). Which two requirements would accomplish this task? (Choose two.)
Antwort: C,D
161. Frage
Click the Exhibit button. Which two statements about the IS-IS output shown in the exhibit are correct? (Choose two.)
Antwort: A,C
Begründung:
This detailed adjacency output shows R3 maintaining four separate, fully Up adjacencies, evenly split between the two IS-IS levels. R1 and R2 are both formed at Level 1, confirming that R3 is directly adjacent to exactly two Level 1 neighbors within its local area, which validates that statement. R4 and R5 are both formed at Level 2, and Level 2 adjacencies are, by definition, part of the IS-IS backbone that interconnects areas; a router maintaining any Level 2 adjacency is by that fact participating in and connected to the Level 2 backbone, confirming R3's backbone connectivity as well. Every one of the four listed adjacencies explicitly shows 'Speaks: IP, IPv6' in its detail output, which is Junos's way of indicating that both the IPv4 and IPv6 address families have been successfully negotiated and are active over that circuit; this directly contradicts, rather than supports, the claim that IPv6 is disabled on these neighbors -- if IPv6 were disabled, the Speaks field would list only IP. Regarding authentication, the output contains no field, flag, or indication whatsoever referencing authentication configuration or state for the R5 adjacency (or any adjacency); Junos would typically surface authentication-related information separately if it were configured and relevant, and its complete absence here means no basis exists in the exhibit to conclude authentication is required for that specific adjacency.
162. Frage
In RSTP, which three port roles are associated with the discarding state? (Choose three.)
Antwort: B,D,E
Begründung:
In Rapid Spanning Tree Protocol (RSTP), there are several port roles that determine the behavior of the port in the spanning tree. The roles include root, designated, alternate, backup, and disabled.
The discarding state is associated with the backup, alternate, and disabled roles. In a stable topology with consistent port roles throughout the network, RSTP ensures that every root port and designated port immediately transition to the forwarding state while all alternate and backup ports are always in the discarding state. Disabled ports are also in the discarding state.
163. Frage
......
Ihnen bei dem Bestehen der Juniper JN0-352 Prüfung erfolgreich zu helfen bedeutet die beste Anerkennung unseres Fleißes. Um diesen Wunsch zu verwirklichen verbessern wir die Prüfungsunterlagen der Juniper JN0-352 immer wieder. Sie können sie beruhigt benutzen. Wenn Sie Fragen über unsere Produkte oder Service haben, können Sie mit uns einfach online kontaktieren oder uns mailen. Nachdem Sie die Juniper JN0-352 Prüfungsunterlagen gekauft haben, geben wir Ihnen die neueste Informationen über die Aktualisierung per E-Mail.
JN0-352 Prüfung: https://www.deutschpruefung.com/JN0-352-deutsch-pruefungsfragen.html