What's more, part of that TorrentExam NSE5_FNC_AD_7.6 dumps now are free: https://drive.google.com/open?id=1ArxU4C22k0JIDt2lSGb7JE_KIOMnVYue
Many candidates may take the price into consideration while buying NSE5_FNC_AD_7.6 exam materials. The price of NSE5_FNC_AD_7.6 exam materials is quite reasonable, you can afford it no matter you are students or the employees in the company. Furthermore the NSE5_FNC_AD_7.6 Exam Materials is high-quality, so that it can help you to pass the exam just one time, we will never let your money gets nothing returns. If you indeed fail the exam, money back will be guaranteed.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
>> NSE5_FNC_AD_7.6 Exam Question <<
In this high-speed world, a waste of time is equal to a waste of money. As an electronic product, our NSE5_FNC_AD_7.6 real study dumps have the distinct advantage of fast delivery. Once our customers pay successfully, we will check about your email address and other information to avoid any error, and send you the NSE5_FNC_AD_7.6 prep guide in 5-10 minutes, so you can get our NSE5_FNC_AD_7.6 Exam Questions at first time. And then you can start your study after downloading the NSE5_FNC_AD_7.6 exam questions in the email attachments. High efficiency service has won reputation for us among multitude of customers, so choosing our NSE5_FNC_AD_7.6 real study dumps we guarantee that you won’t be regret of your decision.
NEW QUESTION # 39
Refer to the output below.
Examine the communication between a primary FortiNAC-F (192.168.10.10) and a secondary FortlNAC-F (192.168.10.110) configured as a 1+1 HA pair. What is the current state of the FortiNAC-F HA pair?
Answer: A
Explanation:
The correct answer is D . The log output shows the local IP address as 192.168.10.10 , which the question identifies as the primary FortiNAC-F server. In the same output, FortiNAC-F reports inControl true and controlServer true , which means the local primary server is currently the control server. The line showing communication to 192.168.10.110 returns Running - Not In Control , confirming that the secondary server is alive but is not the active controlling node.
This matches FortiNAC-F 1+1 HA behavior. The study guide describes a 1+1 HA pair as an active-passive deployment where one FortiNAC-F device is designated primary and the other secondary. Database and configuration synchronization keep the devices aligned, but only one server is in control at a time. If the primary fails, the secondary assumes control automatically; otherwise, the primary remains the active control server.
Option A is wrong because the secondary explicitly reports Not In Control . Option B is wrong because the output does not show database replication failure. Option C is wrong because failover is not in progress; the output shows a stable state where the primary is in control and the secondary is running as the passive node.
NEW QUESTION # 40
An administrator has created several device profiling rules and evaluated all existing devices in the database.
Some of the devices appear in the profiled devices view because they matched a rule, but they remain unknown and the registration column in the profiled devices view shows " No " .
What is the most likely cause?
Answer: D
Explanation:
In FortiNAC-F,Device Profiling Rulesare used to automatically identify and categorize devices (such as IP cameras, printers, or IoT devices) based on fingerprints like DHCP fingerprints, OIDs, or MAC prefixes.
When a device matches a rule, it appears in theProfiled Devicesview.
However, matching a rule does not automatically register the device in the database unless the rule is configured to do so. If the devices appear in the view but remain " Unknown " and show " No " in the registration column, it indicates that the " Confirm " (or " Auto-register " ) action has not been triggered. In the Device Profiling Rule configuration, there is a setting called " Allow Auto-Approval " or " Confirm " . If this is not enabled, the system identifies the device but waits for an administrator to manually approve the match before changing the host status from " Unknown " to " Registered " .
This is a common " safety " configuration used during the initial deployment phase to ensure that the profiling rules are accurate before the system begins automatically granting network access based on those matches.
" If a device matches a rule but is not registered, check the rule configuration. TheConfirmoption (within the Method or Rule settings) determines if the system automatically registers the device upon a match.
IfConfirmis not enabled, the device will remain in the ' Profiled ' state with a registration status of ' No ' until an administrator manually promotes the device. " -FortiNAC-F Administration Guide: Device Profiling Rules.
NEW QUESTION # 41
Refer to the exhibit.
An administrator is configuring FortiNAC-F (or the onboarding of guest users. Which IP address would be used for the gateway defined in the DHCP scope?
Answer: C
Explanation:
The correct answer is D . The question is about guest onboarding , and the exhibit shows the Guest Network using gateway 10.20.1.250 . In a Layer 3 captive network design, FortiNAC-F provides DHCP and DNS services to isolated or captive-network hosts, but the DHCP scope must still give the endpoint the correct default gateway for the network where that endpoint is placed. The study guide specifically warns that, when configuring Layer 3 captive network scopes, the administrator must think from the isolated host's perspective for the IP pool and gateway configuration . It also states that each captive network interface configuration includes an IP address, subnet mask, default gateway, and one or more DHCP scopes.
Option A , 10.0.1.254 , is the infrastructure gateway on the FortiNAC-F service/production-side segment, not the guest network gateway. Option B , 10.0.1.110 , is the FortiNAC-F interface address shown in the diagram, not the default gateway for guest clients. Option C , 10.10.1.250 , is the gateway for the Isolation Network , not the Guest Network . Since the administrator is configuring guest onboarding, the DHCP scope for guest users must hand out 10.20.1.250 as the gateway.
NEW QUESTION # 42
An administrator has created several device profiling rules and evaluated all existing devices in the database. Some of the devices appear in the profiled devices view because they matched a rule, but they remain unknown and the registration column in the profiled devices view shows "No".
What is the most likely cause?
Answer: D
Explanation:
In FortiNAC-F, Device Profiling Rules are used to automatically identify and categorize devices (such as IP cameras, printers, or IoT devices) based on fingerprints like DHCP fingerprints, OIDs, or MAC prefixes. When a device matches a rule, it appears in the Profiled Devices view.
However, matching a rule does not automatically register the device in the database unless the rule is configured to do so. If the devices appear in the view but remain "Unknown" and show "No" in the registration column, it indicates that the "Confirm" (or "Auto-register") action has not been triggered. In the Device Profiling Rule configuration, there is a setting called "Allow Auto-Approval" or "Confirm". If this is not enabled, the system identifies the device but waits for an administrator to manually approve the match before changing the host status from "Unknown" to "Registered".
This is a common "safety" configuration used during the initial deployment phase to ensure that the profiling rules are accurate before the system begins automatically granting network access based on those matches.
"If a device matches a rule but is not registered, check the rule configuration. The Confirm option (within the Method or Rule settings) determines if the system automatically registers the device upon a match. If Confirm is not enabled, the device will remain in the 'Profiled' state with a registration status of 'No' until an administrator manually promotes the device." - FortiNAC-F Administration Guide: Device Profiling Rules.
NEW QUESTION # 43
While deploying FortiNAC-F devices in a 1+1 HA configuration, the administrator has chosen to use the shared IP address option.
Which condition must be met for this type of deployment?
Answer: C
Explanation:
In a 1+1 High Availability (HA) deployment, FortiNAC-F supports two primary methods for management access: individual IP addresses or a Shared IP Address (also known as a Virtual IP or VIP). The Shared IP option is part of a Layer 2 HA design, which simplifies administration by providing a single URL or IP that always points to whichever appliance is currently in the "Active" or "In Control" state.
For a Shared IP configuration to function correctly, the Primary and Secondary administrative interfaces (port1) must be on the same subnet. This requirement exists because the Shared IP is a logical address that is dynamically assigned to the physical interface of the active unit. Since only one unit can own the IP at a time, both units must reside on the same broadcast domain (Layer 2) to ensure that ARP requests for the Shared IP are correctly answered and that the gateway remains reachable regardless of which unit is active. If the appliances were on different subnets (a Layer 3 HA design), a shared IP could not be used because it cannot "float" across different network segments; instead, administrators would need to manage each unit via its unique physical IP or use a FortiNAC Manager.
"For L2 HA configurations, click the Use Shared IP Address checkbox and enter the Shared IP Address information... If your Primary and Secondary Servers are not in the same subnet, do not use a shared IP address. The shared IP address moves between appliances during a failover and recovery and requires both units to reside on the same network." - FortiNAC-F High Availability Reference Manual: Shared IP Configuration.
NEW QUESTION # 44
......
Our NSE5_FNC_AD_7.6 study braindumps can be very good to meet user demand in this respect, allow the user to read and write in a good environment continuously consolidate what they learned. Our NSE5_FNC_AD_7.6 prep guide has high quality. So there is all effective and central practice for you to prepare for your test. With our professional ability, we can accord to the necessary testing points to edit NSE5_FNC_AD_7.6 Exam Questions. It points to the exam heart to solve your difficulty. So high quality materials can help you to pass your exam effectively, make you feel easy, to achieve your goal.
NSE5_FNC_AD_7.6 Latest Test Dumps: https://www.torrentexam.com/NSE5_FNC_AD_7.6-exam-latest-torrent.html
2026 Latest TorrentExam NSE5_FNC_AD_7.6 PDF Dumps and NSE5_FNC_AD_7.6 Exam Engine Free Share: https://drive.google.com/open?id=1ArxU4C22k0JIDt2lSGb7JE_KIOMnVYue