2026 Latest It-Tests JN0-336 PDF Dumps and JN0-336 Exam Engine Free Share: https://drive.google.com/open?id=1mAYBb14F7kS9gOtq3k4_Xw6hsyCt5BKA
There are a lot of experts and professors in or company in the field. In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. They tried their best to design the best JN0-336 certification training dumps from our company for all people. By our study materials, all people can prepare for their JN0-336 exam in the more efficient method. We can guarantee that our study materials will be suitable for all people and meet the demands of all people, including students, workers and housewives and so on. If you decide to buy and use the JN0-336 Training Materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt. We sincerely hope that you can achieve your dream in the near future by the JN0-336 latest questions of our company.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: High Availability Clustering | 20% | - Configuration and Troubleshooting - Control and Data Plane Synchronization - Chassis Cluster Architecture - Failover Behavior |
| Topic 2: UTM (Unified Threat Management) | 15% | - Antispam - Content Filtering - Antivirus - Web Filtering |
| Topic 3: Security Policy | 25% | - Policy Scheduling - Policy Troubleshooting - Policy Components and Structure - Policy Logging |
| Topic 4: Screen Options | 15% | - Attack Detection and Mitigation - Screen Options Configuration - Custom Screen Options |
| Topic 5: IPsec VPNs | 25% | - VPN High Availability - Route-Based VPNs - IKE Phase 1 and Phase 2 - VPN Troubleshooting - Policy-Based VPNs |
>> JN0-336 Answers Real Questions <<
If you buy our JN0-336 study torrent, we will provide 24-hour online efficient service for you. You can consult any questions about our JN0-336 study materials that you meet, and communicate with us at any time you want. Of course, if you are so busy that you have no time to communicate with us online, don't worry, you can try to tell us your problems about our JN0-336 Guide materials by an email at any time; you will receive an email immediately from the customer service. As a word, I believe the 24-hour online efficient service will help you solve all problems to help you pass the exam.
NEW QUESTION # 17
What are two requirements for enabling AppQoE? (Choose two.)
Answer: B,C
Explanation:
AppQoE is a feature that enables you to monitor and optimize the quality of experience for applications on your network. It uses application-aware routing and dynamic path selection to choose the best path for each application based on predefined or custom SLA profiles. AppQoE also provides visibility and reporting on application performance and network conditions.
Two requirements for enabling AppQoE are:
You need two SRX Series or MX Series device endpoints: AppQoE can be configured between two SRX Series device endpoints or between an SRX Series device and an MX Series device in a hub-and-spoke or full mesh topology. The devices must run the same version of Junos OS and have the same AppQoE configuration.
You need an APPID feature license: AppQoE requires an APPID feature license to be installed on the SRX Series device. The APPID feature license enables application identification and classification, which are essential for AppQoE to work.
Reference: = Application Quality of Experience Overview, Application Quality of Experience Overview - Juniper Networks, Application Quality of Experience | Junos OS | Juniper Networks
NEW QUESTION # 18
Exhibit
Which two statements are correct about the configuration shown in the exhibit? (Choose two.)
Answer: C,D
Explanation:
The log session-init; command within the policy configuration specifies that an event log entry will be created every time a session is initialized, meaning each new session will generate a log event. This is useful for tracking and analyzing the traffic flows entering the device.
Changing session-init to session-close in the log statement would mean that the device logs sessions when they close instead of when they open. This setting is typically used to log details about the session upon termination, which can help in analyzing the duration, end status, and other parameters of sessions, including those of unidentified flows.
NEW QUESTION # 19
You need to secure communications from a mobile command center which uses a 5G mobile ISP behind CGNAT to an SRX Series Firewall at headquarters.
Which two actions should be performed on the SRX Series Firewall in this scenario? (Choose two.)
Answer: A,B
Explanation:
The correct answers are A and D. A mobile command center using a 5G ISP behind CGNAT is operating behind dynamic address translation. For IPsec to work reliably through NAT, the SRX must support NAT Traversal, which encapsulates IKE and ESP traffic in UDP/4500 after NAT is detected. Juniper states that NAT-T is used when NAT devices exist in the datapath and that NAT keepalives are required because NAT devices age out UDP translations. Juniper's Security Director VPN workflow also specifically says to enable NAT-T when the dynamic endpoint is behind a NAT device.
DPD is also required because mobile and carrier-grade NAT connections can disappear, roam, or become stale without a clean tunnel teardown. Juniper defines Dead Peer Detection as the method used by IPsec peers to verify whether the remote peer is still present and responsive by sending encrypted IKE notification payloads and waiting for acknowledgements. Option B is not the best answer because IKEv1 aggressive mode is weaker and does not provide identity protection; Juniper also notes that aggressive mode applies only to IKEv1. Option C is invalid because IKEv2 aggressive mode does not exist. Reference topics: IPsec VPN, NAT-T, CGNAT, dynamic endpoints, DPD, IKE peer availability.
NEW QUESTION # 20
Which two statements are correct about the security associations of an IPsec VPN? (Choose two.)
Answer: A,D
Explanation:
The correct answers are A and D. In IKEv1-based IPsec VPNs, there are two distinct negotiation phases.
IKEv1 Phase 1 establishes the secure and authenticated IKE channel between peers. That means the IKE SA is built during Phase 1. Juniper describes Phase 1 as the negotiation of proposals for how to authenticate and secure the channel, including encryption algorithms, authentication algorithms, Diffie-Hellman group, and authentication method.
IKEv1 Phase 2 then uses that secure channel to negotiate the IPsec SAs that protect actual user traffic through the VPN. Juniper states that Phase 2 negotiates security associations to secure the data traversing the IPsec tunnel, and that the Phase 2 proposal includes the security protocol, such as ESP or AH, plus the selected encryption and authentication algorithms. Option B is wrong because IKEv1 SAs are not established in Phase
2; Phase 2 creates IPsec SAs. Option C is wrong because Phase 1 does not create the data-plane IPsec SA; it creates the secure IKE control channel used for Phase 2 negotiation. Reference topics: IPsec VPN, IKEv1 Phase 1, IKE SA, IKEv1 Phase 2, IPsec SA, ESP/AH proposals.
NEW QUESTION # 21
When a security policy is deleted, which statement is correct about the default behavior of active sessions allowed by that policy?
Answer: B
Explanation:
When a security policy is deleted, the existing sessions that were previously allowed by that policy are not immediately dropped; instead, they are typically treated as legacy flows. This means they are allowed to continue until they naturally end or until the session timeout is reached. This behavior ensures that deleting a policy does not abruptly disrupt ongoing traffic flows that were previously authorized by that policy. This approach helps in avoiding unintended service disruptions, especially in production environments where active connections may be critical to operations.
NEW QUESTION # 22
......
Solutions is one of the top platforms that has been helping JN0-336 exam candidates for many years. Over this long time period countless candidates have passed their dream Security, Specialist (JNCIS-SEC) exam. The JN0-336 exam questions are designed by experience and qualified Security, Specialist (JNCIS-SEC) expert. The It-Tests JN0-336 Exam Questions will not only assist you in JN0-336 exam preparation but also give you sight knowledge about the Security, Specialist (JNCIS-SEC) (JN0-336) exam topics that will help you in your professional career.
Valid Test JN0-336 Vce Free: https://www.it-tests.com/JN0-336.html
BTW, DOWNLOAD part of It-Tests JN0-336 dumps from Cloud Storage: https://drive.google.com/open?id=1mAYBb14F7kS9gOtq3k4_Xw6hsyCt5BKA