Itcertking Fortinet NSEI_OTS_AR-7.6 pdf questions have been marked as the topmost source for the preparation of NSEI_OTS_AR-7.6 new questions by industry experts. These questions cover every topic in the exam, and they have been verified by Fortinet professionals. Moreover, you can download the Fortinet NSE I - OT Security 7.6 Architect (NSEI_OTS_AR-7.6) pdf questions demo to get a better analysis of the exam. By practicing with these questions, you can assess your preparation for the Fortinet NSEI_OTS_AR-7.6 new questions.
| Section | Weight | Objectives |
|---|---|---|
| Network Security | 25% | - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) - Virtual patching for legacy OT systems |
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) |
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - Event handling and logging with FortiAnalyzer 7.6 - OT-focused risk assessment and management |
| Network Access Control | 25% | - Authentication and access policies for OT devices - OT Ethernet and industrial communication models - Purdue Model and secure network segmentation |
>> NSEI_OTS_AR-7.6 Dumps Questions <<
First and foremost, our company has prepared NSEI_OTS_AR-7.6 free demo in this website for our customers. Second, it is convenient for you to read and make notes with our versions of NSEI_OTS_AR-7.6 exam materials. Last but not least, we will provide considerate on line after sale service for you in twenty four hours a day, seven days a week. So let our NSEI_OTS_AR-7.6 Practice Guide to be your learning partner in the course of preparing for the exam, it will be a wise choice for you to choose our NSEI_OTS_AR-7.6 study dumps.
NEW QUESTION # 36
Refer to the exhibit.
A Run_report task is shown. You want to automate the generation of a newly created report on FortiAnalyzer . When you configure the Run_report task in Playbook, why is the report not shown in the Report field? (Choose two answers)
Answer: B,E
Explanation:
Based on the architecture of FortiAnalyzer within the Security Fabric and its automation capabilities:
* Automation Stitch and Reports : Within the Security Fabric environment, FortiAnalyzer serves as a key element in creating automation stitches and playbooks. For a report to be selectable within a Playbook task (such as the Run_report task shown in the exhibit), it must meet specific technical prerequisites in the report configuration.
* Auto-cache Requirement (Answer C) : For a report to be used for automated generation, it must be " ready " to be processed by the engine without manual intervention. Auto-cache must be enabled in the report settings to ensure the report can be generated dynamically and efficiently when triggered by the playbook.
* Extended Log Filtering (Answer B) : Playbooks often pass specific variables from the trigger (such as a specific device IP or a time range) into the report. For the report to accept these dynamic parameters and be visible as an " automation-compatible " report in the Playbook interface, Extended Log Filtering must be enabled.
* Workflow Constraints : Without these two settings enabled on the report itself, the Playbook engine cannot guarantee the report ' s successful generation or parameter injection, and thus filters it out of the available selection list in the Run_report task.
NEW QUESTION # 37
Refer to the exhibit.
The Core Network Security Connectors page of a FortiGate device is shown. You are configuring the Security Fabric in your OT network. One of the devices is not sending logs to FortiAnalyzer. When you check the status of the FortiGate device, it is Disabled as shown in the exhibit. Which two actions must you perform to enable this FortiGate device to send logs to FortiAnalyzer? (Choose two answers)
Answer: A,B
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of OT Security 7.6 Study guides:
The correct answers are A and C .
A is correct because the exhibit explicitly shows Logging & Analytics # FortiAnalyzer: Disabled on this FortiGate. The FortiGate must therefore have its FortiAnalyzer logging destination enabled and configured.
The study guide explains that the FortiAnalyzer Fabric connector consolidates traffic logs and, importantly, that "each FortiGate in the Security Fabric logs traffic to FortiAnalyzer independent of the root or other leaf devices." This means each FortiGate requires its own functioning logging connection to FortiAnalyzer; being a Security Fabric member alone does not cause its logs to pass through the root FortiGate.
C is correct because FortiAnalyzer must accept and authorize the FortiGate as a managed/logging device before the FortiGate can establish the normal logging relationship. This complements the FortiGate-side Logging & Analytics configuration. The study guide ' s Security Fabric logging architecture shows individual FortiGate devices maintaining FortiAnalyzer log connections , with FortiAnalyzer receiving and correlating their traffic and UTM logs. It specifically states that if the root FortiGate is unavailable, logging from leaf FortiGate devices to FortiAnalyzer continues to function , confirming that the FortiGate-to-FortiAnalyzer logging relationship is direct.
B is incorrect because configuring Fabric settings on FortiAnalyzer is not the missing step indicated by the exhibit. The problem shown is that FortiAnalyzer logging is Disabled on the FortiGate .
D is incorrect because authorization on the root FortiGate concerns joining and trusting a FortiGate as a Security Fabric member. It does not authorize that FortiGate as a logging device on FortiAnalyzer. The study guide explicitly distinguishes the architecture by stating that every FortiGate logs to FortiAnalyzer independently of the root .
NEW QUESTION # 38
Refer to the exhibit.
A firewall policy page is shown. To improve the security of your OT network, you have configured a Supervisor profile in the firewall policies, as shown in the exhibit. However, a supervisor is reporting that he cannot ping PLC-1. What are the two reasons? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and C .
Option A is correct because the study guide explains that with active authentication , FortiGate prompts the user only when they use "an acceptable login protocol." It states: "When you use only active authentication, if all possible policies that could match the source IP address have authentication enabled, then the user will receive a login prompt (assuming they use an acceptable login protocol)." A direct ping to PLC-1 uses ICMP , which is not the kind of login protocol used to trigger user authentication.
So the supervisor must first authenticate through a protocol such as HTTPS or Telnet , then the ICMP traffic can match the authenticated policy.
Option C is also correct because the exhibit shows policy ID 8 greyed out, meaning it is not enabled. That policy appears above the Supervisor_access (9) policy and allows broader access to PLC-1 , whereas policy 9 is limited to ALL_ICMP . The study guide explains that "Because the user has not yet authenticated, the user group aspect of the traffic does not match" and FortiGate continues searching for another complete match. In this case, with policy 8 disabled, the supervisor is left with only the ICMP rule, which cannot be used to perform the initial login step needed for active authentication.
Option B is not supported by the exhibit. Option D is incorrect because auth-on-demand always would force authentication prompts more aggressively, but the core problem here is that the user is trying to start with ICMP and the broader policy that could permit the initial authenticated access is disabled.
NEW QUESTION # 39
Refer to the exhibit.
A partial OT network is shown. You want to provide the supervisor with secure remote access. Which two features can you implement on Edge-FortiGate ? (Choose two answers)
Answer: C,D
Explanation:
Based on the exhibit and the OT Security 7.6 Architect standards for Secure Remote Access :
* Secure Tunneling (Statement A) : The exhibit shows a Remote PC connecting through a VPN Cloud to the Edge-FortiGate . In the Fortinet architecture, IPsec VPN is the primary method for establishing a secure, encrypted tunnel for remote administrators or supervisors to access the internal OT segments (Level 2/3) from an external location.
* Multi-Factor Authentication (Statement B) : Secure remote access in OT environments (aligned with IEC 62443 standards) requires strong authentication. The study guide emphasizes the use of FortiToken to provide Two-Factor Authentication (2FA) for VPN users, ensuring that compromised credentials alone are not enough to gain access to critical infrastructure.
* FSSO (Statement D) : Fortinet Single Sign-On is generally used for identifying internal users already on the network to apply identity-based policies; it is not the primary mechanism for establishing the remote connection itself.
* SD-WAN (Statement C) : While SD-WAN can manage the path of the VPN traffic, it is a WAN optimization and reliability feature, not a " secure remote access " feature for a supervisor in the context of authentication and encryption.
NEW QUESTION # 40
Refer to the exhibit.
Which statement about this partial Asset Identity List page is correct? (Choose one answer)
Answer: B
Explanation:
Based on the OT Security 7.6 Architect study guide regarding the Asset Identity Center and Asset Management :
* Vulnerability Visibility : The Asset Identity List tab displays key metadata for IT and OT devices, including detected addresses, users, and a specific column for Vulnerabilities .
* Virtual Patching Feature : In the OT Security 7.6 architecture, the " Vulnerabilities " column is populated through the OT Security Service license, which includes " OT vulnerability correlation definitions & virtual patching signatures " .
* Correlation Mechanism : FortiGate extracts metadata from OT traffic and uses these signatures to identify known vulnerabilities on the assets. For these vulnerabilities to be identified and correlated in the Asset Identity Center as shown in the exhibit (displaying a count of 8 vulnerabilities), the Virtual Patching feature must be active.
* Architectural Implementation : Virtual patching is a critical component of the " Protection " layer in OT networks, allowing administrators to secure legacy or unpatchable PLCs and RTUs by blocking exploit attempts at the network level using IPS-based virtual patching signatures.
* Exhibit Analysis : The presence of identified vulnerabilities (the number " 8 " in the red shield) in the Asset Identity List confirms that the FortiGate is actively performing vulnerability correlation, which is the operational result of having a Virtual Patching security profile applied to the relevant firewall policy.
NEW QUESTION # 41
......
The study system of our company will provide all customers with the best study materials. If you buy the NSEI_OTS_AR-7.6 latest questions of our company, you will have the right to enjoy all the NSEI_OTS_AR-7.6 certification training materials from our company. By updating the study system of the NSEI_OTS_AR-7.6 Training Materials, we can guarantee that our company can provide the newest information about the exam for all people. We believe that getting the newest information about the exam will help all customers pass the NSEI_OTS_AR-7.6 exam easily.
NSEI_OTS_AR-7.6 Latest Dumps Questions: https://www.itcertking.com/NSEI_OTS_AR-7.6_exam.html