For example, if you are a college student, you can learn and use online resources through the student learning platform over the JN0-364 study materials. On the other hand, the JN0-364 study engine are for an office worker, free profession personnel have different learning arrangement, such extensive audience greatly improved the core competitiveness of our JN0-364 Exam Questions, to provide users with better suited to their specific circumstances of high quality learning resources, according to their aptitude, on-demand, maximum play to the role of the JN0-364 exam questions.
| Section | Weight | Objectives |
|---|---|---|
| Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Routing instances and RIB groups - Filter-based forwarding - Martian addresses - Load balancing |
| Spanning Tree Protocols | 8-12% | - STP, RSTP, MSTP, VSTP - BPDU and protection features - Port roles and states - Configuration and convergence |
| Open Shortest Path First (OSPF) | 15-20% | - Link-state database - LSA types and operation - Areas and router types - Configuration and troubleshooting |
| Layer 2 Bridging and VLANs | 8-12% | - Service provider switching features - VLANs and trunking - Bridging concepts |
| IPv6 | 8-12% | - Address types and format - Static and dynamic routing - OSPFv3 and BGP for IPv6 - Autoconfiguration |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Border Gateway Protocol (BGP) | 20-25% | - Basic operation and message types - IBGP and EBGP - Policy and route filtering - Configuration and troubleshooting - Path selection and attributes |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Labels and LIB - Terminology and forwarding - Configuration and monitoring - Segment routing basics - LDP and RSVP |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - Adjacencies and levels - PDUs and TLVs - Metrics and wide metrics - Configuration and monitoring |
| High Availability | 5-8% | - Graceful restart - Nonstop active routing - NSR and GRES concepts |
>> JN0-364 Sample Questions <<
The TestkingPDF is a leading platform that offers real, valid, and subject matter expert's verified JN0-364 exam questions. These JN0-364 exam practice questions are particularly designed for fast Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam preparation. The TestkingPDF JN0-364 exam questions are designed and verified by experienced and qualified Juniper JN0-364 Exam trainers. They work together and put all their expertise and experience to ensure the top standard of TestkingPDF JN0-364 exam practice questions all the time.
NEW QUESTION # 136
Which IPv6 extension header is used to specify intermediate nodes for a packet's path?
Answer: D
Explanation:
In the IPv6 architecture, the base header is kept at a fixed size of 40 bytes to streamline processing. Any additional features or options are handled byExtension Headers, which are inserted between the IPv6 header and the upper-layer protocol. According to Juniper Networks technical documentation and RFC 8200, when a source node needs to list one or more intermediate nodes to be "visited" on the way to the final destination, it utilizes theRouting extension header (Option B).
The Routing header is functionally similar to the "Source Route" option in IPv4. When a packet contains a Routing header, it is addressed to the first intermediate node listed in the header. That node examines the header, swaps its own address with the next address in the list, and forwards the packet. This process continues until the packet reaches the final destination. This is a foundational component for technologies like Segment Routing over IPv6 (SRv6), where the Routing header (specifically the Segment Routing Header or SRH) is used to steer traffic through a specific set of service instructions or nodes.
To distinguish this from the other options:
* Hop-by-hop options (Option A):These carry information that must be examined byeverynode along the path (such as Router Alert), not just specific intermediate nodes.
* Fragment (Option C):This is used only when the source node needs to fragment a packet that exceeds the path MTU.
* Destination options (Option D):These carry optional information intended specifically for the destination node (or nodes listed in a Routing header), but they do not dictate the path themselves.
NEW QUESTION # 137
Which BGP attribute is used to detect routing loops?
Answer: C
NEW QUESTION # 138
You are configuring BGP on a Juniper router to peer with an external provider. After committing the configuration, the BGP session remains in the Idle state. Which configuration issue would prevent the BGP session from progressing beyond the Idle state?
Answer: D
Explanation:
In the BGP finite state machine, theIdlestate is the "stop" or "start" point of the protocol. When a session is stuck in Idle, it means the BGP process is either administratively disabled or, more commonly, is unable to initiate the underlying TCP connection required for BGP.
According to Juniper Networks Service Provider documentation, the most common reason for a BGP session to remain in Idle is a lack ofrouting reachability. For BGP to move to theConnectstate, the Junos kernel must have a route to the IP address specified in the neighbor statement. If thepeer IP address is unreachable (Option A)-meaning there is no route in inet.0 (via OSPF, IS-IS, or static)-the router cannot initiate the TCP three-way handshake on port 179. Consequently, the state machine will never progress.
Analysis of incorrect options:
* Option B:BGP does not care if the local AS is higher or lower than the peer's; it only cares if they match the configuration. AS numbers are identifiers, not priorities.
* Option C:A mismatchedRouter IDdoes not prevent a session from leaving the Idle state. It would typically cause the session to reach theOpenConfirmstate, and then fail with a "Notification" message due to a collision or identification error.
* Option D:While a mismatchedgroup type(internal vs. external) will cause the session to fail, it usually fails during theOpenmessage exchange (OpenSent state) because the AS numbers provided will not match the expected peer type (IBGP vs. EBGP).
Only the lack of a path to the neighbor (reachability) keeps the session at the very beginning of the process:
theIdlestate.
NEW QUESTION # 139
Which IS-IS adjacency state indicates that hello packets have been exchanged but the adjacency is not yet fully established?
Answer: B
Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol, the process of forming an adjacency between two neighbors follows a specific sequence of states. While OSPF uses states like "Init," "Two-Way," and "Full," IS-IS uses a slightly different nomenclature within its state machine.
According to Juniper Networks technical documentation, when a router first sends anIS-IS Hello (IIH) PDU and receives one back from a neighbor, but has not yet confirmed that the neighbor "sees" it back, the adjacency enters theInitializingstate. Specifically, on a point-to-point link, the state transitions fromDownto Initializingas soon as the first PDU is received. On a broadcast network (like Ethernet), the Initializing state indicates that the local router has received a Hello PDU from the neighbor, but the local router's own System ID is not yet listed in the neighbor's list of "seen" neighbors (the neighbor's Hello PDU does not yet contain the local router's MAC address).
The adjacency only moves to theUpstate (Option C) once bi-directional communication is confirmed- meaning both routers have seen each other's System IDs in the incoming Hello PDUs.
Why other options are incorrect:
* Loading (Option A):This is an OSPF state, not an IS-IS state. In IS-IS, database synchronization happens after the adjacency is Up.
* Two-Way (Option D):While functionally similar to the state IS-IS is achieving, "Two-Way" is the specific terminology for OSPF. In IS-IS, the intermediate step between knowing a neighbor exists and having a fully functional adjacency is strictly calledInitializing.
NEW QUESTION # 140
Interface ge-0/0/0.0 connects your network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP. In this scenario, how is this task accomplished?
Answer: B
NEW QUESTION # 141
......
TestkingPDF senior experts have developed exercises and answers about Juniper certification JN0-364 exam with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use TestkingPDF's products, TestkingPDF can help you 100% pass your first time to attend Juniper Certification JN0-364 Exam. If you fail the exam, we will give a full refund to you.
JN0-364 Cert Guide: https://www.testkingpdf.com/JN0-364-testking-pdf-torrent.html