PrepAwayETE also has a Huawei Practice Test engine that can be used to simulate the genuine H35-581_V2.0 exam. This online practice test engine allows you to answer questions in a simulated environment, giving you a better understanding of the exam's structure and format. With the help of this tool, you may better prepare for the HCIP-5G-RNP&RNO V2.0 (H35-581_V2.0) test.
| Section | Weight | Objectives |
|---|---|---|
| 5G Radio Network Optimization | 20% | - Coverage, capacity, and quality optimization - Fault diagnosis and troubleshooting - Drive test and signaling tracing - Performance indicator analysis |
| 5G Industry Applications & Private Network Solutions | 5% | - Private 5G network requirements and design - Vertical industry scenarios and KPI requirements |
| 5G Radio Network In-depth Principles | 30% | - Massive MIMO and beamforming principles - 5G NR protocol stack and signaling procedures - 5G spectrum and frame structure - 5G NR air interface fundamentals |
| 5G Radio Network Planning | 10% | - Link budget calculation - Parameter planning and configuration - Interference analysis and mitigation - Coverage and capacity planning |
| 5G RAN Feature Application | 35% | - Power control and load balancing - Mobility management and handover optimization - Carrier aggregation and dual connectivity - Energy saving and coverage enhancement features |
>> Reliable H35-581_V2.0 Exam Guide <<
Through the feedback of many examinees who have used PrepAwayETE's training program to pass some IT certification exams, it proves that using PrepAwayETE's products to pass IT certification exams is very easy. Recently, PrepAwayETE has developed the newest training solutions about the popular Huawei Certification H35-581_V2.0 Exam, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Huawei certification H35-581_V2.0 exam.
NEW QUESTION # 16
Which of the following parameters relate to open-loop power control for PUCCH power control?
Select All that Apply
Answer: A,C,D
Explanation:
Options A, B, and C are the intended answers because the 5G NR Physical Uplink Control Channel (PUCCH) transmit-power calculation depends on subcarrier spacing, allocated radio resources, and format-dependent control-information characteristics.
PUCCH carries Uplink Control Information (UCI), including HARQ acknowledgments, Scheduling Requests (SR), and Channel State Information (CSI).
PUCCH power control combines open-loop parameters with dynamically accumulated closed-loop Transmit Power Control (TPC) adjustments.
The open-loop component establishes a transmission-power baseline using configured power offsets, downlink path-loss estimation, and the transmission-resource configuration.
Option A - PUCCH SCS: Subcarrier spacing contributes to the bandwidth-dependent term of the PUCCH transmit-power formula.
Option B - UCI format: The intended concept concerns PUCCH format and UCI payload-dependent adjustments. Different PUCCH formats have different symbol structures, payload capacities, and associated power-adjustment requirements.
Option C - Number of RBs: The allocated PUCCH Resource Blocks affect transmission bandwidth and the corresponding power calculation.
Option D - PUCCH MCS: Unlike PUSCH, PUCCH power control does not use a conventional PUCCH MCS index as an independent open-loop power-control parameter.
Consequently, options A, B, and C correctly identify the relevant factors in the intended examination context.
Official Reference: 3GPP TS 38.213, Section 7.2.1, PUCCH Transmit Power ; TS 38.331, PUCCH- PowerControl Configuration .
Technical warning / qualification: The original option B states UCI format . The standards use the more precise concepts of PUCCH format and UCI payload-dependent adjustments. For technical accuracy, this option should be revised before publication. The original wording has been preserved above.
NEW QUESTION # 17
Which of the following 5GC modules connects to IMS?
Answer: D
Explanation:
The User Plane Function (UPF) is the 5G Core component that provides user-plane connectivity between PDU sessions and external Data Networks (DNs), including the IP Multimedia Subsystem (IMS).
IMS supplies multimedia communication services such as voice and video sessions using IP-based signaling and media transport.
In a 5G Standalone deployment, a UE can establish an IMS PDU session to access IMS services, including Voice over NR (VoNR).
The UPF processes user-plane packets associated with the PDU session and forwards traffic toward the appropriate external data network through the N6 interface.
For IMS services, this connectivity enables Session Initiation Protocol (SIP) signaling to reach relevant IMS components, such as the Proxy Call Session Control Function (P-CSCF).
The UPF also forwards media traffic according to the established packet-handling and forwarding rules.
The other functions serve different purposes.
AMF manages UE registration, access, and mobility procedures.
SMF controls PDU sessions, selects and configures UPFs, and manages applicable session-related QoS rules.
UDM manages subscription information and supports user-data services.
Although the SMF participates in establishing connectivity and policy enforcement, the UPF provides the actual user-plane path toward IMS.
Therefore, option A is correct.
Official Reference: 3GPP TS 23.501, Sections 4.2 and 6.2.3, 5G System Architecture and User Plane Function ; TS 23.228, Annex Y.9.2, IMS Services Architecture .
NEW QUESTION # 18
Which of the following physical-layer processing procedures is dedicated to the DFT-S-OFDM waveform?
Answer: D
Explanation:
Transform precoding is the distinguishing physical-layer processing operation associated with Discrete Fourier Transform-spread Orthogonal Frequency Division Multiplexing (DFT-S-OFDM).
In 5G NR, uplink data transmission on the Physical Uplink Shared Channel (PUSCH) can use CP-OFDM or DFT-S-OFDM, subject to the applicable configuration.
DFT-S-OFDM introduces a Discrete Fourier Transform (DFT) operation into the symbol-processing chain before resource mapping and OFDM signal generation. This spreads modulation symbols across the allocated subcarriers.
A principal benefit is the reduction of Peak-to-Average Power Ratio (PAPR) compared with conventional CP- OFDM in typical operating conditions.
Lower PAPR enables the UE power amplifier to operate more efficiently, reducing the required amplifier back-off and potentially improving uplink coverage, particularly for power-limited terminals.
Scrambling, modulation, and layer mapping are not exclusive to DFT-S-OFDM. These operations also occur in other NR physical-layer processing chains.
By contrast, transform precoding provides the characteristic DFT-spreading operation associated with DFT-S- OFDM transmission.
Accordingly, option D is correct because it identifies the processing operation that distinguishes DFT-S- OFDM from conventional CP-OFDM.
Official Reference: 3GPP TS 38.211, Sections 6.3.1.1-6.3.1.4, PUSCH Scrambling, Modulation, Layer Mapping, and Transform Precoding ; TS 38.214, Section 6.1.3.
Technical warning / qualification: The original option states Transformer precoding . The standardized term is Transform precoding . The wording should be corrected in the published question bank.
NEW QUESTION # 19
When multiple slices exist in the 5GC, which of the following modules is responsible for selecting a slice?
Answer: D
Explanation:
The Network Slice Selection Function (NSSF) is the dedicated 5G Core network function responsible for supporting network-slice selection.
Network slicing enables operators to create multiple logical networks on common infrastructure, allowing differentiated service capabilities for enhanced Mobile Broadband (eMBB), Ultra-Reliable Low-Latency Communications (URLLC), and massive Machine-Type Communications (mMTC).
Each network slice is identified using Single Network Slice Selection Assistance Information (S-NSSAI), consisting of a Slice/Service Type (SST) and an optional Slice Differentiator (SD).
During UE registration, the Access and Mobility Management Function (AMF) processes the requested slice information and may interact with the NSSF through the Nnssf service-based interface.
The NSSF assists with determining the Allowed NSSAI, identifying suitable network-slice instances, and determining appropriate AMF sets for the requested slices.
The remaining network functions have distinct responsibilities.
AMF manages UE registration, access authorization coordination, and mobility management. Although it participates in slice-selection procedures, it is not the dedicated slice-selection function.
NRF provides network-function registration and discovery services.
NEF securely exposes network capabilities and events to authorized external applications.
Therefore, NSSF is the correct answer because network-slice selection is explicitly included in its standardized functional responsibilities.
Official Reference: 3GPP TS 23.501, Sections 5.15 and 6.2.14, Network Slicing and NSSF Functionality .
NEW QUESTION # 20
Which parameter specifies the maximum number of consecutive out-of-synchronization indications that a UE receives from the lower layer on the PCell?
Answer: D
Explanation:
N310 is the correct answer because it defines the threshold number of consecutive out-of-synchronization indications received from lower protocol layers before the UE starts the applicable radio-link failure detection timer.
In 5G NR, Radio Link Monitoring (RLM) evaluates the quality of the serving radio connection using configured reference signals and associated detection thresholds.
The physical layer continuously evaluates the radio-link condition and reports in-sync or out-of-sync indications to the RRC layer when the applicable requirements are met.
When radio conditions deteriorate sufficiently, the physical layer provides out-of-sync indications.
If the UE receives N310 consecutive out-of-sync indications , the RRC layer starts timer T310, subject to the relevant procedural conditions.
The UE then monitors whether the serving radio link recovers before T310 expires.
If the UE receives N311 consecutive in-sync indications while T310 is running, the timer can be stopped, indicating recovery from the degraded radio-link condition.
If T310 expires without the required recovery, the UE performs radio-link failure handling, which may result in RRC connection reestablishment or transition to RRC_IDLE.
N312 is associated with a separate configured radio-link monitoring mechanism.
The critical distinction is that N310 specifies the consecutive indication threshold, whereas T310 represents the monitoring duration.
Official Reference: 3GPP TS 38.331, Section 5.3.10, Radio Link Failure Related Actions , and Section 7.2, Counters .
NEW QUESTION # 21
......
Career competitive is similar with playing tennis, if you want to defeat your opponents every time, you will improve yourself continuously. You can choose Huawei H35-581_V2.0 valid test dumps materials to help you clear exams. You will get an outstanding advantage over others while applying a same position. You will get better benefits and salary. Our H35-581_V2.0 Valid Test Dumps materials will be the best preparation tool for every candidate.
H35-581_V2.0 Training Materials: https://www.prepawayete.com/Huawei/H35-581_V2.0-practice-exam-dumps.html