IT elite team of our BraindumpsPrep make a great effort to provide large numbers of examinees with the latest version of Fortinet's NSEI_OTS_AR-7.6 exam training materials, and to improve the accuracy of NSEI_OTS_AR-7.6 exam dumps. Choosing BraindumpsPrep, you can make only half efforts of others to pass the same NSEI_OTS_AR-7.6 Certification Exam. What's more, after you purchase NSEI_OTS_AR-7.6 exam training materials, we will provide free renewal service as long as one year.
| Section | Objectives |
|---|---|
| Asset Management | - Implement device detection on FortiGate and FortiNAC - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance |
| Network Access Control | - Configure network access authentication - Explain OT Ethernet concepts - Configure network segmentation schemas |
| Network Security | - Configure security inspections for industrial protocols - Configure automation - Configure virtual patching |
| Monitoring and Risk Assessment | - Perform risk assessment and management - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers |
>> Valid Study NSEI_OTS_AR-7.6 Questions <<
I know that you are already determined to make a change, and our NSEI_OTS_AR-7.6 exam materials will spare no effort to help you. After you purchase our NSEI_OTS_AR-7.6 practice engine, I hope you can stick with it. We can promise that you really don't need to spend a long time and you can definitely pass the NSEI_OTS_AR-7.6 Exam. As we have so many customers passed the NSEI_OTS_AR-7.6 study questions, the pass rate is high as 98% to 100%. And this data is tested. With our NSEI_OTS_AR-7.6 learning guide, you won't regret!
NEW QUESTION # 53
Refer to the exhibit.
A partial OT network is shown. You want to configure an automated alert sent by FortiAnalyzer when an attack occurs on a FortiGate device. Which two configurations must you implement? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are A and D . The study guide provides a direct use case called Attack Detection and Automated Alert . It states: "A downstream FortiGate detects an attack and sends logs to FortiAnalyzer. FortiAnalyzer parses the logs and notifies the root FortiGate. The root FortiGate triggers the action, which in this case, is a notification to the administrator." The same slide also explicitly shows "Stitches configured on root FortiGate." This confirms that to send the automated alert, you must configure the automation stitch on the root FortiGate .
The second required configuration is an event handler on FortiAnalyzer . The guide explains that "Event handlers generate events" and that "FortiAnalyzer uses event handlers to filter all incoming logs. If logs match the conditions configured in an event handler, FortiAnalyzer generates an event." Since FortiAnalyzer must detect the attack from the received logs before notifying the root FortiGate, an event handler is required on FortiAnalyzer.
Option B is incorrect because the study guide does not identify a LOCALHOST task as the required configuration for this attack-alert flow. Option C is also incorrect because the question asks what must be configured to enable the automated alert workflow . An IPS profile may detect some attacks, but the required automation path in the study guide is specifically event handler on FortiAnalyzer + stitch on the root FortiGate .
NEW QUESTION # 54
Refer to the exhibit.
The Core Network Security Connectors page of the FortiGate-2 device is shown. Which statement is correct? (Choose one answer)
Answer: A
Explanation:
Based on the provided exhibit and the OT Security 7.6 Architect curriculum regarding the Fortinet Security Fabric :
* Fabric Role : The exhibit clearly shows that FortiGate-2 has the role set to Join Fabric . This confirms it is a downstream device and not the Fabric Root (eliminating Option A).
* Upstream Connection : The device is configured to point to an Upstream FortiGate at IP address
10.1.2.254 .
* Fabric Status : The status is currently displayed as Not Connected . In a standard Fortinet Security Fabric deployment, once a downstream device is configured to join the fabric, it sends a request to the upstream root device. The root FortiGate must then explicitly authorize the downstream unit before the connection is established and the status changes to " Connected. "
* Authorization Requirement : The " Not Connected " status, while having the upstream IP correctly configured, is the classic indicator that the authorization step is pending on the root FortiGate.
Furthermore, under the LAN Edge Devices section, it shows another downstream FortiGate requiring authorization on this specific unit, highlighting that authorization is a manual security requirement for all stages of the Fabric hierarchy.
* FortiAnalyzer Status : While the Logging & Analytics section shows FortiAnalyzer is Disabled , this is a configuration choice and does not prevent the Security Fabric from connecting; therefore, configuring it is not the solution to the connectivity status shown (eliminating Option C).
In summary, FortiGate-2 cannot join the fabric until an administrator logs into the Root FortiGate (10.1.2.254) and authorizes the join request from FortiGate-2.
NEW QUESTION # 55
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in a firewall policy, which two statements are correct? (Choose two answers)
Answer: C,D
Explanation:
The correct answers are A and C .
Option C is correct because the profile clearly contains the Operational Technology category and specific OT application signatures such as Modbus and IEC.60870.5.104 . The study guide says "You can use application control signatures to detect OT protocols" and "You can filter to a specific OT protocol." That means OT application signatures are active in this sensor profile.
Option A is correct because the guide explains that application control works at different levels: "Detection of protocol (one detection per session)" and "Message level (one detection per protocol message)." It also says you can use application signatures for "granular message type identification." In the exhibit, IEC.
60870.5.104.Control.Functions is explicitly configured, which is a granular IEC message/control-level signature rather than only a protocol-level match. That means logging and control can occur at the IEC command level.
Option B is not correct because the profile shows Modbus configured at the parent protocol level as Monitor
, while the guide states that the "parent signature takes precedence over the child signature." Since protocol-level detection is one detection per session , that does not mean FortiGate will necessarily log each Modbus command individually.
Option D is incorrect because even though the broader Operational Technology category is set to block, the profile includes specific application and filter overrides for Modbus and IEC 104 behavior. So the resulting effect is not simply that all OT protocols are blocked .
NEW QUESTION # 56
For the installation of your first FortiGate device, you want to minimize the impact in your OT network.
Therefore, you deploy it initially as an offline IDS. Which two statements about this deployment are correct?
(Choose two answers)
Answer: A,B
NEW QUESTION # 57
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: D
NEW QUESTION # 58
......
This society is ever – changing and the test content will change with the change of society. You don't have to worry that our NSEI_OTS_AR-7.6 training materials will be out of date. In order to keep up with the change direction of the NSEI_OTS_AR-7.6 Exam, our question bank has been constantly updated. We have dedicated IT staff that checks for updates of our NSEI_OTS_AR-7.6 study questions every day and sends them to you automatically once they occur.
Reliable NSEI_OTS_AR-7.6 Exam Papers: https://www.briandumpsprep.com/NSEI_OTS_AR-7.6-prep-exam-braindumps.html