Trying before buying AZ-802 exam braindumps can help you have a deeper understanding of what you are going to buy. We offer you free demo for you to have a try, and you can know what the complete version is like through the free demo. Moreover, AZ-802 exam braindumps are high quality and accuracy, and you can use them at ease. We have online and offline service for you, and they possess the professional knowledge for AZ-802 Exam Materials, and if you have any questions, you can contact with us, and we will give you reply as soon as we can.
| Section | Objectives |
|---|---|
| Disaster recovery and migration | - Backup and restore
|
| Manage hybrid compute and virtualization | - Virtual machines
|
| Secure Windows Server hybrid infrastructures | - Identity and access management
|
| Networking and storage infrastructure | - Storage management
|
| Monitoring and troubleshooting | - Diagnostics
|
| Implement and manage high availability | - Load balancing and redundancy
|
As long as you are willing to exercise on a regular basis, the AZ-802 exam will be a piece of cake, because what our AZ-802 practice materials include is quintessential points about the exam. And our high pass rate as 98% to 100% are all proved data form our customers who had attended the AZ-802 Exam and got their success with the help of our AZ-802 study dumps. So just come on and join our success!
NEW QUESTION # 189
Your network contains an Active Directory Domain Services (AD DS) forest that has a Windows Server 2008 R2 forest functional level. The forest contains the domains shown in the following table. You need to perform an in-place upgrade of the domain controllers in east.contoso.com to Windows Server 2025. The solution must minimize administrative effort. What should you do first? (Exhibit: domain functional levels table.)
Domain functional levels
Answer: C
Explanation:
Adding or in-place upgrading a domain controller to Windows Server 2025 requires the forest functional level to be at least Windows Server 2016, and a forest functional level can never exceed the domain functional level of any domain in the forest, including the forest root. Because contoso.com, the forest root, is currently at the Windows Server 2012 R2 domain functional level, the forest functional level is capped below Windows Server 2016 even though east.contoso.com already sits at the Windows Server 2016 domain functional level.
Raising contoso.com ' s domain functional level to Windows Server 2016 removes that ceiling and is therefore the necessary first step before the forest functional level can be raised and the east.contoso.com domain controllers upgraded in place to Windows Server 2025 with minimal additional effort. Extending the schema or attempting to raise the forest functional level directly would fail at this point, since the forest-level ceiling imposed by contoso.com ' s own domain functional level has not yet been lifted.
NEW QUESTION # 190
You need to meet the technical requirements for Cluster2.
Which four actions should you perform in sequence before you can enable replication? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
1. Create an Azure Recovery Services vault. 2. Create a Hyper-V site. 3. Install and register Azure Site Recovery Providers. 4. Create and associate replication policies.
Setting up Azure Site Recovery for a Hyper-V cluster that is not managed by Virtual Machine Manager follows a fixed infrastructure-preparation order. An Azure Recovery Services vault must exist first, since it is the container that every later step registers against. A Hyper-V site is then created in that vault to represent the on-premises Hyper-V environment, because a Hyper-V host or cluster must belong to a site before its hosts can be registered against Azure Site Recovery. The Azure Site Recovery Provider is then installed on the Hyper-V hosts (Cluster2 ' s nodes) and registered to that site/vault, which is what actually connects the cluster nodes to Azure Site Recovery. Only once the hosts are registered can a replication policy be created and associated with the Hyper-V site, since a policy has nothing to attach to until the site and its registered hosts already exist. Installing Azure Connected Machine agents is unrelated to Hyper-V VM replication -- that agent is used for onboarding servers to Azure Arc -- and is not part of this workflow. Therefore, the correct order is: create the vault, create the Hyper-V site, install and register the Providers, and create and associate the replication policy.
NEW QUESTION # 191
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a failover cluster named Cluster1 that hosts an application named App1. The General tab in App1 Properties is shown in the General exhibit: Preferred Owners lists Server1 and Server2, both unchecked, with the Up/Down reordering controls disabled; Priority is Medium; the role is Running on Server2. The Failover tab in App1 Properties is shown in the Failover exhibit: Maximum failures in the specified period is 3, Period (hours) is 6, and Failback is currently set to " Allow failback " / " Immediately. " Server1 shuts down unexpectedly. You need to ensure that when you start Server1, App1 continues to run on Server2. Solution:
From the General settings, you move Server2 up. Does this meet the goal?
App1 Properties - General tab
App1 Properties - Failover tab
Answer: A
Explanation:
The General tab ' s Preferred Owners list shows both Server1 and Server2 with their checkboxes cleared, and with the Up/Down reordering controls disabled as a direct consequence -- a server must first be selected as a preferred owner before it can be reordered within that list at all. In this state, attempting to move Server2 up is not an actionable configuration change, since the control is disabled. Even in a hypothetical state where preferred owners had been selected and reordering were possible, changing preferred-owner order only influences which node is chosen first among the preferred owners when a role starts or fails over -- it does not, by itself, disable the " Allow failback " behavior shown on the Failover tab, which remains set to " Immediately. " That means App1 could still fail back automatically under a preferred-owner configuration, unlike the deterministic Prevent Failback setting. Because reordering is not even possible in the current configuration, and would not reliably prevent failback even if it were, this solution does not meet the goal.
NEW QUESTION # 192
You implement the planned changes for Record1 and Record2.
On which DNS servers is each record stored after AD DS replication completes?
To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer Area:
Answer:
Explanation:
Explanation:
Record1: DC3 only
Record2: DC1, DC3, and DC5 only
Active Directory-integrated DNS zones use application directory partitions to control which domain controllers receive replicated DNS records.
Zone1.litware.com is stored in DomainDnsZones. This partition replicates DNS records to participating DNS servers within the litware.com domain. According to the domain controller exhibit, DC3 is the only DNS server in that domain. Consequently, Record1 resides on DC3.
Zone2.litware.com is stored in ForestDnsZones, which replicates DNS data to participating DNS servers throughout the litware.com forest.
The relevant DNS servers are DC1 in dev.com, DC3 in litware.com, and DC5 in west.litware.com.
Domain controllers without the DNS Server role do not automatically receive these DNS application partitions merely because they are global catalog servers.
Therefore, Record1 resides on DC3, and Record2 resides on DC1, DC3, and DC5.
NEW QUESTION # 193
You have a server that runs Windows Server and contains a shared folder named UserData. You need to limit the amount of storage space that each user can consume in UserData. What should you use?
Answer: C
Explanation:
Limiting how much storage space an individual user can consume within a specific shared folder is a per- folder, per-user quota requirement, and File Server Resource Manager (FSRM) is the Windows Server role service built for exactly this: FSRM quotas are applied to a volume or folder path and can automatically enforce a hard or soft capacity limit, optionally sending notifications or running scripts as usage approaches the threshold. Because FSRM quotas are folder-scoped, an administrator can apply one directly to UserData (or to per-user subfolders beneath it) to cap consumption without affecting unrelated shares on the same volume. Storage Spaces is a platform for pooling physical disks into virtual disks and has no concept of per- user or per-folder capacity limits; it only manages capacity at the storage-pool and virtual-disk level. Work Folders is a technology for syncing user files between devices and a central server location, addressing availability/synchronization, not capacity enforcement. Distributed File System (DFS) Namespaces provides a unified logical namespace over shared folders that may reside on different servers, which simplifies access and organization but does nothing to restrict how much data any given user stores. Because the requirement is specifically about capping per-user consumption inside one shared folder, File Server Resource Manager quotas are the appropriate and only fitting tool among the options.
NEW QUESTION # 194
......
Obtaining an IT certification shows you are an ambitious individual who is always looking to improve your skill set. Most companies think highly of this character. Our AZ-802 exam original questions will help you clear exam certainly in a short time. You don't need to worry about how difficulty the exams are. Free4Torrent release the best high-quality AZ-802 Exam original questions to help you most candidates pass exams and achieve their goal surely.
Reliable Test AZ-802 Test: https://www.free4torrent.com/AZ-802-braindumps-torrent.html