To upgrade skills, hundreds of candidates attempt the Administering Windows Server (AZ-802) certification exam and try to be smart and more efficient than the rest. In that case, they are now finding ways by which they can get help to crack the Administering Windows Server (AZ-802) certification exams. Let's discuss the sources that can prove to be a major help if you are planning to take the exam.
| Section | Weight | Objectives |
|---|---|---|
| Implement and manage an on-premises and hybrid networking infrastructure | 15% | - Configure software-defined networking - Secure network traffic in hybrid environments - Implement hybrid network connectivity - Configure IP addressing, DNS, and DHCP |
| Manage Windows Servers and workloads in a hybrid environment | 20% | - Deploy servers using Windows Admin Center and Azure Arc - Implement hybrid identity solutions - Manage updates and patches across hybrid servers - Configure remote management and secure administration |
| Implement high availability and disaster recovery | 5% | - Monitor and troubleshoot Windows Server environments - Implement backup and recovery solutions - Use Azure Site Recovery for hybrid workloads - Configure failover clustering - Perform server and workload migrations |
| Secure Windows Server on-premises and hybrid infrastructures | 10% | - Manage access control and permissions - Implement security baselines and hardening - Configure Windows Defender and audit policies |
| Deploy and manage Active Directory Domain Services (AD DS) in on-premises and cloud environments | 20% | - Install and configure domain controllers - Manage FSMO roles and replication - Implement and manage Group Policy Objects - Integrate AD DS with Azure AD and Azure Arc |
| Manage storage and file services | 15% | - Implement Storage Spaces and Storage Spaces Direct - Integrate on-premises storage with Azure Storage - Configure file servers and shares - Configure data deduplication and replication |
| Manage virtual machines and containers | 15% | - Deploy and manage containers and Kubernetes on Windows Server - Deploy and manage Hyper-V virtual machines - Configure Azure Arc-enabled servers and VMs |
>> AZ-802 Practice Questions <<
You may urgently need to attend AZ-802 certificate exam and get the certificate to prove you are qualified for the job in some area. If you buy our AZ-802 study materials you will pass the test almost without any problems. Our AZ-802 study materials boost high passing rate and hit rate so that you needn't worry that you can't pass the test too much.To further understand the merits and features of our AZ-802 Practice Engine you could look at the introduction of our product in detail.
NEW QUESTION # 157
You create a new Azure subscription.
You plan to deploy Azure Active Directory Domain Services (Azure AD DS) and Azure virtual machines.
The virtual machines will be joined to Azure AD DS.
You need to deploy Active Directory Domain Services (AD DS) to ensure that the virtual machines can be deployed and joined to Azure AD DS.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Reference:
The Administering Windows Server Hybrid Core Infrastructure guidance for deploying Azure Active Directory Domain Services (Azure AD DS) in a new subscription is explicit about the required sequence.
First, you prepare networking: "Before you enable Azure AD DS, create or select an Azure virtual network and subnet that will host the managed domain." Next, you provision the managed domain: "Enable Azure AD DS into the chosen virtual network/subnet; the service deploys managed domain controllers and exposes domain IP addresses." Finally, you update DNS for the VNet so VMs can locate the domain: "After the managed domain is provisioned, configure the virtual network DNS servers to the IP addresses of the Azure AD DS domain controllers so that virtual machines can resolve the domain and join it." The course also clarifies what you do not do with Azure AD DS: "Azure AD DS is a managed domain; you do not install the AD DS role or run the AD DS installation wizard on your own VMs." And: "Azure AD Connect is only required when synchronizing identities from an on-premises AD; it isn't required for a cloud- only deployment of Azure AD DS." Therefore, the correct sequence to ensure VMs can be deployed and joined to Azure AD DS is:
Create an Azure virtual network,
Create an Azure AD DS instance (into that VNet/subnet),
Modify the VNet DNS settings to point to the managed domain IPs.
NEW QUESTION # 158
You need to meet the technical requirements for VM3. On which volume can you enable Data Deduplication?
Answer: D
Explanation:
Data Deduplication is a Windows Server file-and-storage feature that can only be enabled on NTFS-formatted data volumes; it cannot be enabled on the operating system (boot/system) volume, and it does not support ReFS or FAT/exFAT volumes at all. VM3 ' s volumes are C (NTFS, the operating system volume), D (NTFS, a data volume), E (ReFS), and F (exFAT). Volume C is excluded because Deduplication is never supported on the volume that hosts the operating system, even though its file system is NTFS. Volume E is excluded because Data Deduplication has no ReFS support in general-purpose deployments; ReFS uses its own separate storage-efficiency mechanisms such as block cloning, not the Deduplication feature. Volume F is excluded because exFAT is a lightweight file system with no support for Windows Server roles or features such as Deduplication, which depends on NTFS-specific metadata structures. That leaves volume D as the only NTFS data volume that is neither the boot volume nor formatted with an unsupported file system, so it is the only volume on which Data Deduplication can currently be enabled, making option C correct.
NEW QUESTION # 159
Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains a scale-out file server (SOFS) cluster named Cluster1. Cluster1 contains four nodes that run Windows Server 2022.
You need to upgrade the nodes to Windows Server 2025. The solution must minimize the downtime of Cluster1.
Which three actions should you perform on each node in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
A cluster operating system rolling upgrade moves nodes to a new Windows Server version one at a time while the remaining nodes continue serving the SOFS workload, keeping downtime to a minimum. For each node, the documented per-node sequence is to pause and drain its roles and then evict it from the cluster, perform a clean installation of the new operating system (Windows Server 2025) with the Failover Clustering feature reinstalled, and finally add the node back into Cluster1; only after every node has been upgraded this way is the cluster functional level updated. Enabling Cluster-Aware Updating is a separate, ongoing patching mechanism and is not part of this per-node OS upgrade sequence, and simply updating the functional level without first evicting, reinstalling, and re-adding each node would not actually move any node to the new operating system version. This clean-install-per-node approach also avoids leaving any legacy Windows Server 2022 components behind, which an in-place upgrade could otherwise carry forward into the new cluster membership.
NEW QUESTION # 160
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains servers that run Windows Server and store BitLocker recovery keys in AD DS. A server named Server1 starts in BitLocker recovery mode. You need to identify the BitLocker recovery key for Server1. Solution: You run repair-bde.exe by using a BitLocker key package exported from AD DS. Does this meet the goal?
Answer: A
Explanation:
repair-bde.exe is a disk-repair utility, not a lookup or reporting tool: its purpose is to attempt to decrypt or repair a corrupted BitLocker-protected volume when normal unlock methods have failed, and it accepts either a recovery password or a previously exported BitLocker key package (a file containing the actual encryption keys needed to decrypt sectors directly) as the credential it uses to perform that repair; running it does not display, output, or otherwise identify the volume ' s 48-digit numerical recovery password value to the administrator at all, and a key package is a different artifact from the recovery password that would actually need to be entered at Server1 ' s BitLocker recovery screen to unlock it through the normal recovery workflow. The stated goal is specifically to identify the recovery key, meaning to determine and retrieve its value, not to repair or decrypt a damaged volume using key material that must already have been exported in advance; even successfully running repair-bde with an exported key package would leave the administrator no closer to knowing what Server1 ' s recovery password actually is, and it does nothing to address a server that is simply sitting at the BitLocker recovery prompt waiting for a password rather than suffering from actual volume corruption. Because this solution does not retrieve or display the recovery key, it does not meet the stated goal.
NEW QUESTION # 161
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a server named Server1 that runs Windows Server. You need to ensure that only specific applications can modify the data in protected folders on Server1. Solution: From App & browser control, you configure Reputation-based protection. Does this meet the goal?
Answer: A
Explanation:
Reputation-based protection, found under App & browser control in Windows Security, governs Microsoft Defender SmartScreen ' s checks of applications, files, and websites based on their reputation before they are permitted to run or be downloaded. It is designed to block or warn about untrusted or malicious code and content, not to restrict which already-installed, already-trusted applications are permitted to modify files inside specific designated folders. Limiting write access to protected folders so that only explicitly approved applications can modify their contents is the specific job of Controlled folder access, which is configured under Virus & threat protection, Ransomware protection, and lets an administrator add trusted applications to an allowed list while blocking every other process from writing to the protected folders. Because Reputation- based protection addresses a fundamentally different threat model, evaluating whether software should be allowed to execute at all rather than whether an already-running application can write to a specific folder, configuring it does not achieve the goal of restricting folder modification to specific applications, so this solution does not meet the goal.
NEW QUESTION # 162
......
To make sure that our candidates can learn the AZ-802 praparation materials in the least time with the least efforts, they have compiled all of the content to be contained in the shortest possible number of AZ-802 exam questions. Additionally, the AZ-802 exam questions and answers have been designed on the format of the real exam so that the candidates learn it without any extra effort. We have carefully considered every aspects for our customers. And our AZ-802 Practice Braindumps are perfect in every detail.
Exam Dumps AZ-802 Zip: https://www.getvalidtest.com/AZ-802-exam.html