P.S. Free & New NCP-BC-7.5 dumps are available on Google Drive shared by PassReview: https://drive.google.com/open?id=1yvgMcjNrgiychYWjB9YCvC3_aoRAfzUx
The Channel Partner Program Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 NCP-BC-7.5 certification is a valuable credential earned by individuals to validate their skills and competence to perform certain job tasks. Your Nutanix Certified Professional - Business Continuity (NCP-BC) 7.5 NCP-BC-7.5 Certification is usually displayed as proof that youโve been trained, educated, and prepared to meet the specific requirement for your professional role.
| Section | Objectives |
|---|---|
| Topic 1: Prism Central Management | - Cluster and Site Management - DR Monitoring and Operations |
| Topic 2: Data Protection and Backup Integration | - Snapshot Management - Backup Solutions Integration |
| Topic 3: Recovery Operations | - Failover and Failback Procedures - Recovery Plans and Orchestration - Test Recovery Workflows |
| Topic 4: Nutanix Disaster Recovery Architecture | - Protection Domains - Nutanix Leap Overview - Replication Types (Sync/Async) |
| Topic 5: Disaster Recovery Fundamentals | - Business Continuity Principles - DR Concepts (RPO, RTO, SLAs) |
>> Valid NCP-BC-7.5 Test Pdf <<
Continuous improvement is a good thing. If you keep making progress and transcending yourself, you will harvest happiness and growth. The goal of our NCP-BC-7.5 latest exam guide is prompting you to challenge your limitations. People always complain that they do nothing perfectly. The fact is that they never insist on one thing and give up quickly. Our NCP-BC-7.5 Study Dumps will assist you to overcome your shortcomings and become a persistent person. Once you have made up your minds to change, come to purchase our NCP-BC-7.5 training practice.
NEW QUESTION # 71
After performing a failover of encrypted AHV VMs from an on-premises AZ to a recovery AZ, an administrator notices that newly written data is not encrypted. Which post-failover cleanup task must be performed to correct this issue?
Answer: C
Explanation:
Nutanix supports software-based data-at-rest encryption for AHV workloads. This encryption is typically managed through " Storage Policies " in Prism Central, which are applied to virtual machines based on their " Categories " . For example, a policy might state that any VM in the Compliance:Encrypted category must have its data encrypted on the disk.
When a failover occurs, the VM moves to the recovery cluster. While the data that was replicated is already encrypted, the " Active " Storage Policy at the recovery site must be verified. If the recovery cluster does not have the same Storage Policy configuration or if the VM-to-Policy association was lost during the transition, the AOS storage engine at the recovery site will treat the VM as a standard, non-encrypted workload. This results in " newly written data " (writes occurring after the failover) being stored in plain text. To fix this, the administrator must " reassign " or refresh the Storage Policies and Categories at the recovery site. This ensures that the encryption rules are actively enforced on the new cluster, maintaining the organization ' s security posture post-disaster. This cleanup step is vital for compliance-heavy environments where encryption- at-rest is a mandatory requirement.
NEW QUESTION # 72
An organization requires a maximum data loss of 15 minutes for a Tier-1 application running on Nutanix AHV. Which configuration best meets this requirement?
Answer: C
Explanation:
This question evaluates the administrator ' s ability to map business RPO (Recovery Point Objective) requirements to the appropriate Nutanix technology. A requirement for " maximum 15 minutes of data loss " means the system must replicate data at least every 15 minutes. Nutanix offers two primary ways to achieve this: traditional Asynchronous replication and Nearsync replication. While Async (Option D) can technically be configured for a 15-minute interval, it relies on standard, full snapshots which can be heavy and resource- intensive, potentially leading to performance lag if the data churn is high. Nearsync Replication (Option B) is specifically designed for these low-RPO scenarios (from 20 seconds up to 15 minutes) by using " Lightweight Snapshots " (LWS). LWS minimize the storage and I/O overhead compared to traditional snapshots, making Nearsync the more reliable and robust choice for Tier-1 applications. Furthermore, Nearsync is built to handle the constant, high-frequency data transfers required to maintain a strict 15-minute window without impacting application performance. Therefore, Nearsync with a 15-minute RPO is the " best " configuration because it is the purpose-built solution for the stated performance and data protection goals.
NEW QUESTION # 73
An administrator executes an Unplanned Failover. The VMs recover at the Recovery Site and are powered on.
However, the application owners report that the VMs are completely isolated and cannot communicate with any other services on the network. The administrator checks the Recovery Plan and notices the Network Mapping section was left blank.
What is the expected configuration for VMs recovered without a valid Network Mapping?
Answer: C
Explanation:
In the Nutanix Disaster Recovery orchestration workflow, Network Mapping is a critical step that tells the system which production VLAN at the primary site corresponds to which VLAN at the recovery site. This ensures that when a VM is recovered, its virtual NIC (vNIC) is " plugged in " to a functional and valid network at the new location.
If an administrator leaves the Network Mapping section blank, the Nutanix orchestrator has no information about where to connect the VM ' s network interface. In this scenario, the priority of the system is to ensure the VM can boot and start its services without causing a " network storm " or security risk. If the system were to simply attach the VM to a random or default network, it could cause IP address conflicts or expose the VM to the wrong security zone. Therefore, the built-in behavior for a failover without a valid mapping is to recover the VM with all its network adapters in a " disconnected " state. The vNIC still exists on the VM, but the " connected " checkbox in the hypervisor is unchecked. This explains why the application owners report that the VMs are " isolated. " To fix this, the administrator must either update the Recovery Plan with the correct mappings and re-run the task or manually connect each VM ' s vNIC to the correct local VLAN in the recovery site ' s Prism interface.
NEW QUESTION # 74
Which log file should an administrator review to ensure consistent connectivity stability between primary and remote disaster recovery sites?
Answer: B
NEW QUESTION # 75
A solution architect designs a protection policy in Prism Central to protect a specific set of VMs. The design calls for synchronous replication to two separate availability zones (AZs) simultaneously to ensure zero data loss at multiple physical locations. Which configuration limitation prevents the implementation of this specific design?
Answer: B
Explanation:
Nutanix Disaster Recovery provides multisite replication capabilities, allowing a single cluster to protect workloads across multiple locations. However, there are specific architectural constraints regarding the type of replication schedules that can coexist within a single Protection Policy.
The primary limitation in this architect ' s design is that a single Nutanix Protection Policy supports only one synchronous replication schedule. While you can configure a policy to replicate to multiple sites using Asynchronous or NearSync schedules, you cannot natively instruct the system to perform a synchronous " 3- way " write where a single VM mirrors every I/O to two different physical destination clusters simultaneously. This is due to the extreme latency and metadata synchronization overhead that would be required to maintain zero-RPO consistency across three sites for every single write operation. Prism Central does allow pairing with more than one AZ (negating Option B), and synchronous replication is fully supported in Protection Policies (negating Option D). Therefore, to achieve the desired level of protection, the architect would need to use a combination of one synchronous schedule and additional asynchronous schedules to the second AZ, rather than attempting two simultaneous synchronous links within one policy.
NEW QUESTION # 76
......
Many don't find real NCP-BC-7.5 exam questions and face loss of money and time. PassReview made an absolute gem of study material which carries actual Nutanix NCP-BC-7.5 Exam Questions for the students so that they don't get confused in order to prepare for Nutanix NCP-BC-7.5 Exam and pass it with a good score. The Nutanix NCP-BC-7.5 practice test questions are made by examination after consulting with a lot of professionals and receiving positive feedback from them.
NCP-BC-7.5 Valid Exam Prep: https://www.passreview.com/NCP-BC-7.5_exam-braindumps.html
P.S. Free & New NCP-BC-7.5 dumps are available on Google Drive shared by PassReview: https://drive.google.com/open?id=1yvgMcjNrgiychYWjB9YCvC3_aoRAfzUx