Do you still worry about that you can’t find an ideal job and earn low wage? Do you still complaint that your working abilities can’t be recognized and you have not been promoted for a long time? You can try to obtain the NSEI_OTS_AR-7.6 certification and if you pass the exam you will have a high possibility to find a good job with a high income. If you buy our NSEI_OTS_AR-7.6 Questions torrent you will pass the exam easily and successfully. Our NSEI_OTS_AR-7.6 study materials are compiled by experts and approved by professionals with experiences for many years.
| Section | Objectives |
|---|---|
| Topic 1: Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Topic 2: Asset Management | - Use Fortinet Security Fabric for an OT network - Explain OT standards and Fortinet compliance - Implement device detection on FortiGate and FortiNAC |
| Topic 3: Monitoring and Risk Assessment | - Create FortiAnalyzer event handlers - Perform risk assessment and management - Analyze security reports from FortiAnalyzer |
| Topic 4: Network Access Control | - Configure network segmentation schemas - Configure network access authentication - Explain OT Ethernet concepts |
>> Fortinet NSEI_OTS_AR-7.6 Practice Questions <<
The latest NSEI_OTS_AR-7.6 dumps collection covers everything you need to overcome the difficulty of real questions and certification exam. Accurate NSEI_OTS_AR-7.6 test answers are tested and verified by our professional experts with the high technical knowledge and rich experience. You may get answers from other vendors, but our NSEI_OTS_AR-7.6 briandumps pdf are the most reliable training materials for your exam preparation.
NEW QUESTION # 32
Match each industrial protocol to its corresponding characteristics.
Select each OT industrial protocol in the column on the left and drag and drop it into the blank space next to its corresponding characteristic in the column on the right. You must match all four industrial protocols to their characteristics in the work area.
Answer:
Explanation:
Explanation:
Industrial Protocol
Correct Characteristic
POWERLINK
Mainly used for the transmission of process data
EtherCAT
Offers real-time data transmission in a primary-secondary configuration Modbus Uses client/server communication Ethernet/IP Based entirely on Ethernet standards The correct mappings follow the industrial Ethernet characteristics defined in the OT Security 7.6 curriculum.
Ethernet/IP is the industrial protocol based entirely on Ethernet standards and adapts to the standard Ethernet
/TCP-IP architecture. EtherCAT is designed for deterministic real-time communication and specifically operates in a primary-secondary configuration while bypassing OSI layers 3 through 6. POWERLINK is an open real-time industrial Ethernet protocol that uses OSI layers 2 and 7 and is mainly intended for transmitting process data. Modbus , by contrast, uses a client/server communication model in which the server responds only after receiving a request from a client; it is not considered a real-time transmission protocol. These distinctions uniquely determine all four drag-and-drop placements.
NEW QUESTION # 33
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
NEW QUESTION # 34
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,D
NEW QUESTION # 35
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: A
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 36
As the first step in your OT network protection plan, you must identify the OT protocols that the FortiGate device supports. Which two configurations must you implement on this FortiGate device? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are B and C . The study guide states that "You can use application control signatures to detect OT protocols" and that "Application control detects the protocols used in applications like Modbus, IEC 104, and the contents of the telecontrol messages" . It also shows that a Modbus application control profile can be enabled on a firewall policy "for OT protocol visibility in the monitor status." This directly supports B , because application control is the feature used to identify and monitor OT protocols on FortiGate.
The guide also explains under IPS that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI" using config ips global and set exclude-signatures none .
Once enabled, FortiGate can use those OT signatures for OT-aware inspection and protection. That supports C as the second required configuration. A is related to device discovery, not protocol identification, and D is focused on exploit and vulnerability detection rather than the first-step goal of identifying OT protocols.
NEW QUESTION # 37
......
Our NSEI_OTS_AR-7.6 training quiz will be your best teacher who helps you to find the key and difficulty of the exam, so that you no longer feel confused when review. Our NSEI_OTS_AR-7.6 study materials will be your best learning partner and will accompany you through every day of the review. Our NSEI_OTS_AR-7.6 Exam Quiz will help you to deal with all the difficulties you have encountered in the learning process and make you walk more easily and happily on the road of studying.
NSEI_OTS_AR-7.6 Latest Exam Cram: https://www.validbraindumps.com/NSEI_OTS_AR-7.6-exam-prep.html