BONUS!!! Download part of ITExamSimulator H12-893_V1.0 dumps for free: https://drive.google.com/open?id=1EP7OtzAJNCs0sZAHkGQWe_jl8KrrkKkS
As you all know that practicing with the wrong preparation material will waste your valuable money and many precious study hours. So you need to choose the most proper and verified preparation material with caution. Preparation material for the H12-893_V1.0 exam questions from ITExamSimulator helps to break down the most difficult concepts into easy-to-understand examples. Also, you will find that all the included questions are based on the last and updated H12-893_V1.0 Exam Dumps version. We are sure that using ITExamSimulator's Huawei Exam Questions preparation material will support you in passing the H12-893_V1.0 exam with confidence.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Training H12-893_V1.0 Solutions <<
ITExamSimulator is website that can take you access to the road of success. ITExamSimulator can provide the quickly passing Huawei certification H12-893_V1.0 exam training materials for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Huawei Certification H12-893_V1.0 Exam for only one-time.
NEW QUESTION # 37
Which of the following statements are true about the Easy mode? (Select All that Apply)
Answer: A,C,D
Explanation:
The Easy mode in Huawei's iMaster NCE-Fabric simplifies network deployment for basic VXLAN fabrics. Let's evaluate each statement:
A . This mode has low networking requirements: This is true. Easy mode is designed for simple topologies (e.g., small spine-leaf networks) with minimal configuration complexity. TRUE.
B . iMaster NCE-Fabric automatically generates configuration script files: This is true. Easy mode automates script generation based on user inputs, reducing manual effort. TRUE.
C . On iMaster NCE-Fabric, you need to manually create and configure fabric resource pools, managed devices, device groups, device roles, tenants, and VPCs one by one in the Configuration Wizard menu: This is false. Easy mode automates these tasks, minimizing manual configuration compared to advanced modes. FALSE.
D . Layer 2 and Layer 3 basic services in a VPC are orchestrated on the Easy page: This is true. Easy mode supports automated orchestration of L2 (e.g., BDs) and L3 (e.g., gateways) services within a VPC. TRUE.
Thus, A, B, and D are true statements about Easy mode.
NEW QUESTION # 38
Which of the following operations need to be performed before deployment in Easy mode?
(Select All that Apply)
Answer: A,C
Explanation:
The Easy mode in Huawei's iMaster NCE-Fabric simplifies VXLAN fabric deployment with automated configuration. Certain pre-deployment steps are required. Let's evaluate each option:
A). Disable data synchronization upon going online for the first time: This is false. Data synchronization is typically enabled by default to ensure consistency; disabling it is not a standard pre-deployment step and is optional based on specific needs. FALSE.
B). Load the license: This is true. A valid license must be loaded into iMaster NCE-Fabric before deployment to unlock features, including Easy mode functionality. TRUE.
C). Pre-configure the access ports: This is true. Access ports on devices (e.g., server leaf nodes) need to be pre-configured (e.g., with VLANs or basic settings) to ensure connectivity before Easy mode automation begins. TRUE.
D). Configure an SSH fingerprint verification policy: This is false. SSH fingerprint verification is part of security configuration but is not a mandatory pre-deployment step for Easy mode; it can be set post- deployment or is automated. FALSE.
Thus, B (Load the license) and C (Pre-configure the access ports) are required operations before deployment in Easy mode.
NEW QUESTION # 39
After an M-LAG works properly, the two member devices synchronize information with each other in real time. Which of the following pieces of information are synchronized between devices?
(Select All that Apply)
Answer: A,B
Explanation:
In Huawei's M-LAG (Multi-Chassis Link Aggregation) on CE series switches, the two member devices synchronize critical information over the peer-link to ensure seamless operation and failover. Let's evaluate each option:
A). ACL information: Access Control List (ACL) configurations are typically not synchronized in M- LAG, as they are device-specific security policies. Synchronization of ACLs is not a standard feature in Huawei's M-LAG implementation. NOT SYNCHRONIZED.
B). STP status: Spanning Tree Protocol (STP) status (e.g., port roles, states) is synchronized to maintain a consistent loop-free topology across M-LAG peers, especially when V-STP or other STP variants are used. SYNCHRONIZED.
C). Device name: Device names are administrative identifiers and are not synchronized, as they do not impact traffic forwarding or M-LAG functionality. NOT SYNCHRONIZED.
D). LACP information: Link Aggregation Control Protocol (LACP) status (e.g., link states, aggregation details) is synchronized to ensure both M-LAG devices present a unified LAG to downstream devices, supporting load balancing and failover. SYNCHRONIZED.
Thus, B (STP status) and D (LACP information) are synchronized between M-LAG devices.
NEW QUESTION # 40
Which of the following statements are true about a routing design that employs OSPF on the underlay network of a DC? (Select All that Apply)
Answer: B,D
Explanation:
OSPF (Open Shortest Path First) is a routing protocol used in the underlay network of Huawei's CloudFabric DCNs. Let's evaluate each statement:
A). Typically, the IP address of Loopback0 is configured as the VTEP IP address and the same IP address is planned for active-active leaf nodes in the same group: This is true. Loopback0 IP is commonly used as the VTEP IP for stability, and in active-active leaf node groups (e.g., M-LAG), the same IP can be configured with VRRP or anycast to ensure consistency. TRUE.
B). The network type of spine and leaf nodes can be set to P2P in order to accelerate convergence: This is true. Setting OSPF network type to Point-to-Point (P2P) on spine-leaf links reduces overhead (e.g., no DR/BDR election) and speeds up convergence, a recommended practice in Huawei DCNs. TRUE.
C). This routing design is recommended when the DC has more than 300 switches: This is false.
OSPF is suitable for smaller to medium-sized DCNs (e.g., up to 200-300 switches). For larger networks (>300 switches), EBGP is preferred due to better scalability and reduced complexity.
FALSE.
D). It is recommended that all devices be planned in Area 0: This is false. While a single Area 0 is possible for small DCNs, multi-area OSPF is recommended for larger networks to manage scalability and reduce routing table size, avoiding a flat Area 0 design. FALSE.
Thus, A and B are true statements about OSPF routing design in a DC underlay.
NEW QUESTION # 41
The figure shows an incomplete VXLAN packet format.
Which of the following positions should the VXLAN header be inserted into so that the packet format is complete?
Answer: A
Explanation:
VXLAN (Virtual Extensible LAN) is a tunneling protocol that encapsulates Layer 2 Ethernet frames within UDP packets to extend VLANs across Layer 3 networks, commonly used in Huawei's CloudFabric data center solutions. The provided figure illustrates an incomplete VXLAN packet format with the following sequence:
Outer Ethernet Header (Position 1): Encapsulates the packet for transport over the physical network.
Outer IP Header (Position 2): Defines the source and destination IP addresses for the tunnel endpoints.
UDP Header (Position 3): Carries the VXLAN traffic over UDP port 4789.
Inner Ethernet Header (Position 4): The original Layer 2 frame from the VM or endpoint.
Inner IP Header (Position 5): The original IP header of the encapsulated payload.
Payload (Position 6): The data being transported.
The VXLAN header, which includes a 24-bit VXLAN Network Identifier (VNI) to identify the virtual network, must be inserted to complete the encapsulation. In a standard VXLAN packet format:
The VXLAN header follows the UDP header and precedes the inner Ethernet header. This is because the VXLAN header is part of the encapsulation layer, providing the VNI to map the inner frame to the correct overlay network.
The sequence is: Outer Ethernet Header → Outer IP Header → UDP Header → VXLAN Header → Inner Ethernet Header → Inner IP Header → Payload.
In the figure, the positions are numbered as follows:
1: Outer Ethernet Header
2: Outer IP Header
3: UDP Header
4: Inner Ethernet Header
The VXLAN header should be inserted after the UDP header (Position 3) and before the Inner Ethernet Header (Position 4). However, the question asks for the position where the VXLAN header should be "inserted into," implying the point of insertion relative to the existing headers. Since the inner Ethernet header (Position 4) is where the encapsulated data begins, the VXLAN header must be placed just before it, which corresponds to inserting it at the transition from the UDP header to the inner headers. Thus, the correct position is D (2) if interpreted as the logical insertion point after the UDP header, but based on the numbering, it aligns with the need to place it before Position 4. Correcting for the figure's intent, the VXLAN header insertion logically occurs at the boundary before Position 4, but the options suggest a mislabeling. Given standard VXLAN documentation, the VXLAN header follows UDP (Position 3), and the closest insertion point before the inner headers is misinterpreted in numbering. Re-evaluating the figure, Position 2 (after Outer IP Header) is incorrect, and Position 3 (after UDP) is not listed separately. The correct technical insertion is after UDP, but the best fit per options is D (2) as a misnumbered reference to the UDP-to-inner transition. However, standard correction yields after UDP (not directly an option), but strictly, it's after 3. Given options, D (2) is the intended answer based on misaligned numbering.
Corrected answer: After re-evaluating the standard VXLAN packet structure and the figure's
NEW QUESTION # 42
......
We have the first-rate information safety guarantee system for the buyers who buy the H12-893_V1.0 questions and answers of our company, we can ensure that the information of your name, email, or product you buy. We respect the private information of every customer, and we won’t send the junk information to you to bother. Besides, you will get H12-893_V1.0 Questions and answers downloading link within ten minutes, and our system will send you the update version to your mailbox.
H12-893_V1.0 Certification Test Questions: https://www.itexamsimulator.com/H12-893_V1.0-brain-dumps.html
P.S. Free & New H12-893_V1.0 dumps are available on Google Drive shared by ITExamSimulator: https://drive.google.com/open?id=1EP7OtzAJNCs0sZAHkGQWe_jl8KrrkKkS