DumpExam is a wonderful study platform that can transform your effective diligence in to your best rewards. By years of diligent work, our experts have collected the frequent-tested knowledge into our 300-110 exam materials for your reference. So our practice materials are triumph of their endeavor. By resorting to our 300-110 Exam Materials, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our 300-110 practice materials, and the passing rate is 98-100 percent.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wired and Wireless Infrastructure | 30% | - Design high-density wireless networks - Logical infrastructure requirements - Design for data, voice, video, location - Design wireless bridging (mesh) - Design radio management - Physical infrastructure requirements |
| Topic 2: Wireless Site Survey | 25% | - Collect design requirements and evaluate constraints - Predictive site survey - Layer 1 site survey analysis - Planning tools and network metrics evaluation - Pre-deployment site survey - Post-deployment site survey - Material attenuation and its design effects |
| Topic 3: Mobility | 25% | - Site Tags - Optimize client roaming - Design mobility groups - Validate mobility tunneling |
| Topic 4: WLAN High Availability | 20% | - Design controller high availability - Design AP high availability |
Our 300-110 exam torrent is famous for instant download, and we will send the downloading link and password to you within ten minutes after purchasing. You can start your learning immediately, and if you donโt receive 300-110 exam torrent, just contact us, we will solve this problem for you. Whatโs more, with the skilled professionals to compile the 300-110 Exam Dumps, quality and accuracy can be guaranteed. Therefore, you can use the 300-110 exam dumps of us with ease. We have online and offline chat service stuff, if any questions bother you, just consult us.
NEW QUESTION # 21
A customer wants a network engineer to design a Cisco wireless solution that will have redundancy through SSO and LAG. APs in the executive office must reassociate to the WLC as soon as possible in the event of a failure. The WLCs are located in a remote data center. The head office uses a WAN for connectivity with the data center. Which priority must be incorporated in the design to be assigned to the executive APs?
Answer: A
Explanation:
Cisco WLC AP Failover Priority governs the order in which APs are processed when a WLC recovers and APs begin re-associating. The priority levels are: Critical, High, Medium, and Low. During recovery situations, the WLC will accept and process AP join requests in order of priority - Critical priority APs are processed first, before all other priority levels. In a deployment where the WLC is located in a remote data center connected via WAN, the join process for all APs is slower due to WAN latency and potential bandwidth constraints. Under these conditions, assigning Critical priority to executive office APs ensures they are at the front of the processing queue and restore service before lower-priority APs. The executive office designation implies business-critical operations requiring the fastest possible wireless restoration - a requirement that directly maps to the Critical priority level. High priority (Option A) would position the executive APs second in the queue behind any Critical priority APs. Medium (Option B) and Low (Option C) would place them further down the processing order. Reference: WLSD Study Guide - AP Failover Priority Configuration, N+1 and SSO Redundancy Design, WAN-Linked Controller Deployments.
NEW QUESTION # 22
A hospital has a Cisco Catalyst 9800 Series Wireless Controller in an SSO solution deployed in the primary data center. The hospital plans to increase redundancy in the wireless environment.
Management decides to deploy an extra Catalyst 9800 WLC offsite to another data center on a different subnet. A WAN link connects the data centers with a firewall at both ends. Which two design approaches must the engineer take to ensure that the APs can fail over? (Choose two.)
Answer: B,C
Explanation:
For APs to be able to fail over between a primary SSO pair in one data center and a standalone WLC in a remote data center connected via WAN with firewalls, two design requirements must be met. First, a mobility tunnel must be created between the wireless controllers (Option A). The mobility tunnel enables the controllers to exchange mobility control messages, peer information, and eventually AP context when failover occurs. Without the mobility tunnel, the remote WLC is not recognized as a valid failover target by the APs through the mobility domain. Second, UDP ports 16666 and 16667 must be open through the firewalls between the controllers (Option D).
UDP port 16666 is used for mobility control traffic and UDP port 16667 is used for mobility data traffic -- both must be permitted through the firewalls at both data centers for the mobility tunnel to establish and function.
NEW QUESTION # 23
A wireless network consists of two IOS XE controllers installed in a data center, 9100 series APs, and a corporate and a guest WLAN. The customer must have a high availability pair of two Cisco WLCs for the client SSO. Which two design approaches must the engineer take to meet the requirement? (Choose two.)
Answer: B,E
Explanation:
Configuring a high availability SSO pair on Cisco Catalyst 9800 IOS XE WLCs has specific technical prerequisites that must be satisfied for the SSO relationship to form and function correctly. The two critical requirements are: each WLC must have a unique Redundancy Management Interface (RMI) IP address (Option B), and both WLCs must run identical IOS XE software versions (Option D). The Redundancy Management Interface is the dedicated in-band control channel over which the active and standby WLCs exchange state synchronization information, keepalive messages, and configuration updates. Each controller requires its own unique RMI IP address within the same subnet - the active uses one address and the standby uses another. If they shared the same RMI IP (Option C), there would be an IP address conflict preventing the interface from functioning. Identical software versions (Option D) are mandatory because the SSO state synchronization protocol and data structures must be version-compatible between the active and standby controllers. Any mismatch in IOS XE version will prevent SSO formation. License count (Option A) does not need to be identical for SSO. Service port IP addresses (Option E) must be unique per controller, not identical.
Reference: WLSD Study Guide - Catalyst 9800 SSO Prerequisites, Redundancy Management Interface Configuration, High Availability Pair Formation Requirements.
NEW QUESTION # 24
An engineer is designing a solution where guests terminate on an anchor controller in the DMZ. The engineer is having issues and wants to test connectivity between members of a mobility group. Which two steps must be performed to test whether a mobility control packet can be reached over the management interface?
(Choose two.)
Answer: C,D
Explanation:
To test whether mobility control packets can reach between WLC peers in a mobility group (used to validate the anchor controller DMZ setup), two steps are required. First, the mping (mobility ping) command (Option A) is the Cisco WLC CLI tool specifically designed to test mobility control path connectivity between WLC peers. Running mping on both WLCs verifies that mobility control messages (UDP port 16666) can be exchanged bidirectionally. Second, UDP port 16666 must be open between the WLCs (Option C) - mping uses this port, and if it is blocked by a firewall (which is common when the anchor is in a DMZ), the mobility control path cannot be established. These two steps together - sending mping packets and confirming the firewall permits UDP 16666 - validate mobility control plane connectivity. The eping (EoIP ping) command (Option B) tests the data path tunnel, not the control path. IP Protocol 97 (Option D) is for the data plane in legacy mobility mode. Tracert (Option E) traces routing paths but does not validate mobility protocol connectivity. Reference: WLSD Study Guide - Mobility Group Troubleshooting, mping Command, UDP
16666 Firewall Requirements.
NEW QUESTION # 25
An engineer is finalizing the design for a WLAN dedicated to wireless VoIP handsets. Which setting should be applied to this WLAN, and why?
Answer: B
Explanation:
Band Select works by suppressing 2.4 GHz probe responses to dual-band capable clients, deliberately withholding replies so the client is nudged toward discovering the 5 GHz radio instead. That suppression introduces delay into the probe and discovery process, which is harmless for a laptop associating once at the start of the day but damaging for a handset attempting to find a roam target while a call is in progress. Cisco's guidance is therefore to disable Band Select on voice WLANs and instead steer handsets to 5 GHz through client configuration or by not enabling the SSID on 2.4 GHz at all. Client Load Balancing should also be disabled on voice WLANs for the same class of reason - it rejects association attempts to encourage the client toward a different AP, which can block a roaming handset from joining the AP it actually needs. Passive Client mode addresses devices that do not send traffic until polled, such as certain industrial controllers, and is unrelated to handset roaming.
NEW QUESTION # 26
......
Our Cisco training materials are famous at home and abroad, the main reason is because we have other companies that do not have core competitiveness, there are many complicated similar products on the market, if you want to stand out is the selling point of needs its own. Our 300-110 test question with other product of different thing is we have the most core expert team to update our 300-110 study materials, learning platform to changes with the change of the exam outline. If not timely updating 300-110 Training Materials will let users reduce the learning efficiency of even lags behind that of other competitors, the consequence is that users and we don't want to see the phenomenon of the worst, so in order to prevent the occurrence of this kind of risk, the 300-110 practice test dump give supervision and update the progress every day, it emphasized the key selling point of the product.
300-110 Valid Study Notes: https://www.dumpexam.com/300-110-valid-torrent.html