P.S. Free & New 350-501 dumps are available on Google Drive shared by DumpsActual: https://drive.google.com/open?id=1CcC5hIo4XY5ElnyzMk5PgEdA5W_ZK2yZ
Even some one can job-hop to this international company. Opportunities are reserved for those who are prepared. Only if you pass the exam can you get a better promotion. And if you want to pass it more efficiently, we must be the best partner for you. Because we are professional 350-501 question torrent provider, we are worth trusting; because we make great efforts, we do better. Here are many reasons to choose us.
Cisco 350-501 exam is designed for professionals who want to enhance their knowledge and skills in implementing and operating Cisco Service Provider Network Core Technologies. 350-501 exam is part of the CCNP Service Provider certification track and focuses on the core technologies that service providers use to deliver high-quality services to their customers.
Cisco 350-501 Exam is a certification test designed for network engineers who specialize in service provider technologies. 350-501 exam tests the knowledge and skills required to implement and operate the core technologies used in service provider networks. It is also a requirement for obtaining the CCNP Service Provider certification.
>> Test Cisco 350-501 Objectives Pdf <<
Passing the 350-501 exam is your best career opportunity. The rich experience with relevant certificates is important for enterprises to open up a series of professional vacancies for your choices. Our website's 350-501 learning quiz bank and learning materials look up the Latest 350-501 Questions and answers based on the topics you choose. This choice will serve as a breakthrough of your entire career, so prepared to be amazed by high quality and accuracy rate of our 350-501 study guide.
The Cisco 350-501 Exam consists of 60-70 questions that must be completed in 120 minutes. The questions are a mix of multiple-choice, drag and drop, and simulation-based formats. The passing score for the exam is 825 out of 1000, and the exam is available in English and Japanese.
NEW QUESTION # 598
Refer to the exhibit.
Refer to the exhibit. Users in AS 65010 are connected with the application server in AS 65050 with these requirements:
AS 65010 users are experiencing latency and congestion to connect with application server 172.16.50.10.
AS 65030 must be restricted to become Transient Autonomous System for traffic flow.
Links connected to AS 65020 and AS 65040 are underutilized and must be used efficiently for traffic.
Which two configurations must be implemented to meet these requirements? (Choose two.)
Answer: B,C
NEW QUESTION # 599
Refer to the exhibit. OSPF is running in the given network. R1 was previously running EIGRP on a standalone network, and a network engineer just migrated it to OSPF. The R1 peering with R2 has come up. Which additional action must the engineer take so that R2 receives routes from Area 1 and Area 0 but it is prevented from receiving routes from Area 2?
Answer: B
Explanation:
To stop R2 from installing routes learned from Area 2 while still allowing routes from Area 0 and Area 1, the correct method is to filter OSPF routes on R2 as they are learned. This is done with an inbound distribute-list that references a route map which matches the specific prefixes originating from Area 2 using an access control list.
NEW QUESTION # 600
Refer to the exhibit, R1 is connected to multiple BGP-enabled routers that are located in different autonomous systems. R1 has been configured with a BGP neighbor configuration, and all next hops are reachable with the ICMP protocol. A network engineer is examining traffic flow to the FTP server with IP address 134.44.14.10 to support a policy map implementation. The solution should require the minimum possible configuration changes. What should the engineer do to influence the best path route selection algorithm to forward all traffic from R1 via next-hop R2 with IP address 10.114.21.1?
Answer: A
Explanation:
BGP weight is a local attribute used by Cisco routers to influence the best path selection process.
It is applied locally on a router and does not propagate to other routers. By assigning a higher weight to the path via R2 (next-hop 10.114.21.1), R1 can be configured to prefer this path for forwarding traffic to the FTP server at 134.44.14.10.
This approach requires minimal changes since the weight attribute is only configured locally on R1 and does not affect the BGP configuration or routing behavior of other routers in the network.
NEW QUESTION # 601
Refer to the exhibit.
Router R1 is reporting that its BGP neighbor adjacency to router R2 is down, but its state is Active as shown.
Which configuration must be applied to routers R1 and R2 to fix the problem?
Answer: A
Explanation:
In OSPF, the election of the designated router (DR) and backup designated router (BDR) is based on the OSPF network type. The network types include:
* Broadcast: This is the default network type for Ethernet interfaces. In a broadcast network, OSPF elects a DR and BDR. All other routers become DROTHERs. To prevent the election of a DR/BDR, you can configure the interface as non-broadcast (NBMA) using the ip ospf network non- broadcast command.
* Point-to-Point: This network type is used for point-to-point links (e.g., serial links). There is no DR
/BDR election in point-to-point networks.
* Point-to-Multipoint: This network type is used for point-to-multipoint links (e.g., Frame Relay). There is no DR/BDR election in point-to-multipoint networks.
* Point-to-Multipoint Non-Broadcast: Similar to point-to-multipoint, but explicitly configured as non- broadcast. There is no DR/BDR election in point-to-multipoint non-broadcast networks.
* Loopback: Loopback interfaces are always treated as point-to-point.
* Virtual-Link: Used for OSPF virtual links.
* Sham-Link: Used for OSPF sham links.
* Demand Circuit: Used for demand circuits (e.g., ISDN).
* Non-Broadcast: Explicitly configured as non-broadcast. There is no DR/BDR election in non- broadcast networks.
:
Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.0
NEW QUESTION # 602
An engineer is moving all of an organization's Cisco IOS XE BGP routers to the address-family identifier format. Which command should be used to perform this upgrade quickly with the minimum service disruption?
Answer: A
Explanation:
To upgrade a Network Layer Reachability Information (NLRI) formatted router configuration file to the address-family identifier (AFI) format and set the router command-line interface (CLI) to use only AFI commands, use the bgp upgrade-cli command in router configuration mode.
R1(config)#router bgp 61000
R1(config-router)#bgp upgrade-cli
You are about to upgrade to the hierarchical AFI syntax of bgp commands Are you sure ? [yes]:
NEW QUESTION # 603
......
350-501 Valid Exam Format: https://www.dumpsactual.com/350-501-actualtests-dumps.html
BTW, DOWNLOAD part of DumpsActual 350-501 dumps from Cloud Storage: https://drive.google.com/open?id=1CcC5hIo4XY5ElnyzMk5PgEdA5W_ZK2yZ