BTW, DOWNLOAD part of RealExamFree HPE7-A01 dumps from Cloud Storage: https://drive.google.com/open?id=1wTAv1NQvReA9fnABZRJNs7kdovNVoQU7
The HP HPE7-A01 desktop practice exam software is customizable and suits the learning needs of candidates. A free demo of the Aruba Certified Campus Access Professional Exam (HPE7-A01) desktop software is available for sampling purposes. You can change HPE7-A01 Practice Exam's conditions such as duration and the number of questions. This simulator creates a HP HPE7-A01 real exam environment that helps you to get familiar with the original test.
| Section | Weight | Objectives |
|---|---|---|
| Troubleshooting | 6% | - Wired and Wireless Troubleshooting
|
| Monitoring & Management | 6% | - Network Monitoring Tools
|
| Authentication & Authorization | 8% | - AAA Configuration
|
| Network Connectivity & Architecture | 8% | - Connectivity
|
| Network Fundamentals | 4% | - Network Stack
|
| Switching & Layer 2/3 Technologies | 14% | - Campus Switching
|
| Routing | 13% | - Routing Implementation
|
| Performance Optimization | 7% | - QoS and Optimization
|
| WLAN Technologies | 17% | - Wireless LAN Implementation
|
| Security | 9% | - Network Security
|
>> HPE7-A01 Exam Guide Materials <<
Our company has been working on the preparation of HPE7-A01 study materials, and now has successfully helped tens of thousands of candidates around the world to pass the exam. As a member of the group who are about to take the HPE7-A01 Exam, are you worried about the difficulties in preparing for the exam? Maybe this problem can be solved today, if you are willing to spend a few minutes to try our HPE7-A01 study materials.
NEW QUESTION # 101
Refer to the image.
Your customer is complaining of weak Wi-Fi coverage in their office. They mention that the office on the other side of the hall has much better signal.
What is the likely cause of this issue7
Answer: C
Explanation:
The likely cause of the issue of weak Wi-Fi coverage in the office is that the AP is using a directional antenna.
A directional antenna is an antenna that radiates or receives radio waves more strongly in one or more directions, creating a focused beam of signal. A directional antenna can provide better coverage and performance for a specific area, but it can also create dead zones or weak spots for other areas. The other options are incorrect because they either do not affect the Wi-Fi coverage or do not match the scenario.
References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan-rf/rf- fundam
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/wlan- rf/antennas.
NEW QUESTION # 102
A customer is using stacked Aruba CX 6200 and CX 6300 switches for access and a VSX pair of Aruba CX 8325 as a collapsed core 802 1X is implemented for authentication. Due to the lack of cabling, some unmanaged switches are still in use Sometimes devices behind these switches cause network outages The switch should send a warning to the helpdesk when the problem occurs You have been asked to implement an effective solution to the problem What is the solution for this?
Answer: A
Explanation:
This is the correct solution to the problem of devices behind unmanaged switches causing network outages due to loops. Loop protection is a feature that allows an Aruba CX switch to detect and prevent loops by sending loop protection packets on each port, LAG, or VLAN on which loop protection is enabled. If a loop protection packet is received by the same switch that sent it, it indicates a loop exists and an action is taken based on the configuration. Loop protection should be configured on all edge ports of the Aruba CX 6200 and CX 6300 switches, which are the ports that connect to end devices or unmanaged switches. The trap-option should be set up to send a warning to the helpdesk when a loop is detected. The other options are incorrect because they either do not configure loop protection or do not set up the trap-option. Reference: https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-99A8B276-0DA3-4458-AFD8-42BFEC29D4F5.html https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7540/GUID-D8613BDE-CD21-4B83-8561-17DB0311ED8F.html
NEW QUESTION # 103
How do you allow a new VLAN 100 between VSX pair inter-switch-link 256 for port 1/45 and 2/45?
Answer: A
Explanation:
To allow a new VLAN 100 between VSX pair inter-switch-link 256 for port 1/45 and 2/45, you need to use the command vlan trunk allowed 100 in LAG256. This will add VLAN 100 to the list of allowed VLANs on the trunk port LAG256, which is part of the inter-switch-link between VSX peers. The other options are incorrect because they either do not use the correct command or do not specify the correct port or VLAN.
References: https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch07.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html
NEW QUESTION # 104
When setting up an AOS-CX VSX pair, which information does the Inter-Switch Protocol synchronize in the configuration created?
Answer: A
Explanation:
The Inter-Switch Link Protocol (ISL) is a protocol that enables the synchronization of data and state information between two VSX peer switches. The ISL uses a version control mechanism and provides backward compatibility regarding VSX synchronization capabilities. The ISL can span long distances (transceiver dependent) and supports different speeds, such as 10G, 25G,
40G, or 100G. One of the data components that the ISL synchronizes is the MAC table, which is a database that stores the MAC addresses of the devices connected to the switch and the corresponding ports or VLANs. The ISL ensures that both VSX peers have the same MAC table entries and can forward traffic to the correct destination. The ISL also synchronizes other data components, such as ARP table, LACP states for VSX LAGs, and MSTP states.
NEW QUESTION # 105
A customer is concerned about me unprotected traffic between an AOS-CX switch and a gateway, running on AOStO. What is a feasible option to protect this traffic?
Answer: A
Explanation:
According to the Aruba Documentation Portal1, PAPI (Port Aggregation Protocol) is a protocol that allows multiple physical ports to be aggregated into a single logical port for increased bandwidth and performance. PAPI can be used between AOS-CX switches and gateways, or between AOS-CX switches and other devices.
Option A: Implement an IPSec tunnel to protect PAPI between the AOS-CX switches and the gateway This is because option A shows how to implement an IPSec tunnel between two devices using the interface command and the ipsec command. An IPSec tunnel can provide encryption and authentication for PAPI traffic between two devices, such as an AOS-CX switch and a gateway.
NEW QUESTION # 106
......
With the high pass rate of our HPE7-A01 exam questions as 98% to 100%, we can proudly claim that we are unmatched in the market for our accurate and latest HPE7-A01 exam torrent. You will never doubt about our strength on bringing you success and the according certification that you intent to get. We have testified more and more candidates’ triumph with our HPE7-A01 practice materials. We believe you will be one of the winners like them. Just buy our HPE7-A01 study material and you will have a brighter future.
HPE7-A01 Test King: https://www.realexamfree.com/HPE7-A01-real-exam-dumps.html
BONUS!!! Download part of RealExamFree HPE7-A01 dumps for free: https://drive.google.com/open?id=1wTAv1NQvReA9fnABZRJNs7kdovNVoQU7