DOWNLOAD the newest PrepAwayTest JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1_mGg6Ewp5fguRnt2lRGkidkKicZ5B5ME
The PrepAwayTest is a leading and trusted platform that has been assisting the JN0-364 exam candidates since its beginning. Over this long time period, PrepAwayTest has helped countless candidates in their preparation and enabled them to pass the final JN0-364 Exam easily. The PrepAwayTest offers real, valid, and updated Juniper Exam Questions.
| Section | Weight | Objectives |
|---|---|---|
| Protocol-Independent Routing | 10-15% | - Routing instances and RIB groups - Filter-based forwarding - Martian addresses - Static, aggregate, and generated routes - Load balancing |
| Layer 2 Bridging and VLANs | 8-12% | - VLANs and trunking - Bridging concepts - Service provider switching features |
| Intermediate System to Intermediate System (IS-IS) | 10-15% | - PDUs and TLVs - Configuration and monitoring - Adjacencies and levels - Metrics and wide metrics |
| Border Gateway Protocol (BGP) | 20-25% | - Basic operation and message types - Configuration and troubleshooting - Path selection and attributes - IBGP and EBGP - Policy and route filtering |
| Spanning Tree Protocols | 8-12% | - BPDU and protection features - STP, RSTP, MSTP, VSTP - Port roles and states - Configuration and convergence |
| High Availability | 5-8% | - Graceful restart - Nonstop active routing - NSR and GRES concepts |
| Multiprotocol Label Switching (MPLS) | 12-18% | - Terminology and forwarding - Labels and LIB - LDP and RSVP - Configuration and monitoring - Segment routing basics |
| IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Static and dynamic routing - Autoconfiguration - Address types and format |
| Open Shortest Path First (OSPF) | 15-20% | - Areas and router types - Configuration and troubleshooting - Link-state database - LSA types and operation |
| Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
Our product’s passing rate is 99% which means that you almost can pass the test with no doubts. The reasons why our JN0-364 Test Guide’ passing rate is so high are varied. Firstly, our test bank includes two forms and they are the PDF test questions which are selected by the senior lecturer, published authors and professional experts and the practice test software which can test your mastery degree of our Service Provider Routing and Switching, Specialist (JNCIS-SP) study question at any time. The two forms cover the syllabus of the entire test. Our questions and answers include all the questions which may appear in the exam and all the approaches to answer the questions. So we provide the strong backing to help clients to help them pass the test.
NEW QUESTION # 24
Exhibit:
Referring to the exhibit, R1 and R2 are configured to run IS-IS. The IS-IS adjacency between R1 and R2 is up. What does the output of the show isis interface command tell you about R1?
Answer: B
Explanation:
In theIS-IS (Intermediate System to Intermediate System)protocol as implemented in Junos OS, routers can operate at two hierarchical levels:Level 1 (L1)for intra-area routing andLevel 2 (L2)for inter-area backbone routing. By default, a Juniper router and its interfaces are configured to act asLevel 1/2, meaning they will attempt to form adjacencies at both levels simultaneously.
According to Juniper Networks technical documentation, the show isis interface command provides a granular view of how the protocol is interacting with specific local links. In the provided exhibit, we must examine the L (Level)column and theDR (Designated Router)status columns to understand R1's operational state.
* Level Configuration:Under the L column for both the physical interface ge-0/0/0.0 and the loopback lo0.0, the value is strictly2. This indicates that these interfaces have been explicitly configured to operate only at Level 2.
* Adjacency Capabilities:For the interface ge-0/0/0.0, the Level 1 DR field is marked asDisabled. This confirms that R1 is not participating in Level 1 operations on this link; it will not transmit Level 1 Hello PDUs, nor will it listen for them. Consequently, R1 is incapable of forming a Level 1 adjacency with R2 on this segment.
* Metric Implications:The exhibit shows an L1/L2 Metric of100/100. In Junos, "narrow" metrics (the default) are limited to a maximum value of 63 per interface. A metric of 100 indicates thatwide metrics (wide-metrics-only) have been enabled. Therefore, option A is incorrect because the routerisusing wide metrics.
Since the prompt states the adjacency is "up," and the interface is restricted to Level 2, we can conclude that R1 only forms a Level 2 adjacency with R2 (Option B). Even though an L1 metric of 100 is displayed in the table as a configured value, it is not actually "advertised" in a Link-State PDU because the Level 1 protocol is disabled on that interface.
NEW QUESTION # 25
Referring to the exhibit, what will happen to untagged frames?
Answer: D
Explanation:
In the exhibit, the interface is configured with the native-vlan-id 20 parameter. This means that any untagged frames arriving on this interface will be associated with VLAN 20. The native VLAN serves as the default VLAN for untagged frames on a trunk port.
NEW QUESTION # 26
A BGP router receives two routes to the same prefix. One route has a higher local preference, while the other has a shorter AS path.
In this scenario, which route would be selected?
Answer: C
Explanation:
Local preference is evaluated before the AS path length in the BGP best-path selection process.
A route with a higher local preference is therefore preferred even if another route has a shorter AS path.
NEW QUESTION # 27
By default, which routing table contains a list of all ingress LSPs?
Answer: C
Explanation:
Ingress LSPs originate on the router and are installed as routes in the main IPv4 unicast routing table. This table contains the destination prefixes and next-hop information used for normal IP forwarding. When an LSP is configured as the forwarding path, the route in this table points to the LSP as the next hop, making it the table that lists ingress LSP routes by default.
NEW QUESTION # 28
What are three well-known mandatory BGP attributes? (Choose three.)
Answer: A,C,D
Explanation:
Well-known mandatory:Recognized by all BGP peers, passed to all peers, and present in all Update messages. Well-known mandatory attributes include:- Next-hop- Origin- AS PATH Well- known discretionary:Recognized by all routers, passed to all peers, and optionally included in the Update message. Well-known discretionary attributes include:- Local Preference- Atomic Aggregate Optional transitive:Possibly recognized by BGP routers and passed to BGP peers.
Optional transitive attributes are marked as partial when not recognized.
Optional transitive attributes include:- Aggregator- Community
Optional non-transitive:Possibly recognized by BGP routers but not passed to peers.
Optional non- transitive attributes include:- Multi-exit discriminator (MED)-Originator ID-Cluster-ID The three well-known mandatory BGP attributes that must be present in every BGP update message are:
Next Hop: Indicates the next hop IP address to reach the advertising BGP peer.
Origin: Indicates how the route was originated, whether it was via IGP, EGP, or incomplete. AS Path: Lists the autonomous systems that the update has traversed.
NEW QUESTION # 29
......
The JN0-364 PDF file contains the real, valid, and updated Juniper JN0-364 exam practice questions. These are the real JN0-364 exam questions that surely will appear in the upcoming exam and by preparing with them you can easily pass the final exam. The JN0-364 PDF Questions file is easy to use and install. You can use the JN0-364 PDF practice questions on your laptop, desktop, tabs, or even on your smartphone and start Juniper exam preparation right now.
Exam JN0-364 Price: https://www.prepawaytest.com/Juniper/JN0-364-practice-exam-dumps.html
DOWNLOAD the newest PrepAwayTest JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1_mGg6Ewp5fguRnt2lRGkidkKicZ5B5ME